I currently have a Carrier system installed in my house (Florida). The system was installed in 2010 and, for the most part, has been running fine ... and i wish to keep it that way. I am trying to be proactive by purchasing a spare cap for it. The problem is that a few years ago the originally installed startup cap failed. A repairman came to the house and diagnosed the problem as the cap. Unfortunately, he did not have the same form-factor cap on his truck so he (apparently) replaced the original cylindrical cap with a "box" type one, and just left it on a shelf inside the heat pump. 
I wish to purchase an original form-factor cylindrical cap as a spare just in case this one fails. After turning off the unit I opened the side panel and noted all the tech info off the current cap:
Heat pump: Carrier model 25HBC5
45/5 micro f =/- 6%
CBB65-V
440VAC 50/60 Hz, 10000 AFC
Characteristic E -40C to 70C
I have done a bit of research and found many replacement dual-run caps at 45/5, 440VAC but the prices are all over the place. Some run $6 while others about $40. Request recommendations to guide me towards the best value in a spare cap.
Your recommendations are appreciated. Thank you ...
I wish to purchase an original form-factor cylindrical cap as a spare just in case this one fails. After turning off the unit I opened the side panel and noted all the tech info off the current cap:
Heat pump: Carrier model 25HBC5
45/5 micro f =/- 6%
CBB65-V
440VAC 50/60 Hz, 10000 AFC
Characteristic E -40C to 70C
I have done a bit of research and found many replacement dual-run caps at 45/5, 440VAC but the prices are all over the place. Some run $6 while others about $40. Request recommendations to guide me towards the best value in a spare cap.
Your recommendations are appreciated. Thank you ...