help with parts ID

[Ice cold]

I thought i got a good deal on a used jet jdp-20mf. Not sure how old it is. Any way I can find out more details about the machine?? It appears the table is not correct. Didn't find that out until I got it home and looked. Started exploring why it was so loose. the "wrong" table is in really great shape but doesn't fit properly on the press. It has a larger diameter swivel than the post bracket it attaches to and the alignment pin holes do not align when table at 90* and are different sizes.

I may be able to post some pics .... love computers...


4-1/4" wide


4-3/4" wide





This table doesn't match the tables on machines I see online.
So, how old is this press? Are parts available? Tool salvage websites? Appear to be right/wrong table? Who has one that may be able to take a look at it. Anybody got any ideas? Thanks to all who contribute to help the rest of us.

Ice

 

[stanleyrleonard]

Trying to help: http://www.ereplacementparts.com/je...3_32656.html?gclid=CPro84yLjtMCFU-ewAodY7oKCw

Additionally: http://content.jettools.com/assets/manuals/354170_man_EN.pdf

Stan

 

[Ice cold]

Been to those sites. Tables are available (big money) just trying to verify what I have, thus the measurements of the table and where it attaches to post. Can anyone with same model verify my measurements to see if its wrong table.

I'm probably stuck with buying new one or fabbing something to adapt this table. thanks

Ice

 

[Ice cold]

I disassembled the press to get the table bracket off and to clean up the post. Its very gummy and dirty from neglect. I took the "big" table and bracket to a local machinist with REAL tools. He is going to turn me a bushing "of sorts" and tap the table bracket to accept the larger table.

I'll try to post some pics when I get it back.

Ice