To avoid these ads, REGISTER NOW!

Help with socket holder.

To avoid these ads, REGISTER NOW!
R

Rickster

Well-known member
Joined
Jun 26, 2005
Messages
6,218
Location
SE PA
Socket organization is a much discussed and never tiring topic here. Those are commomly referred to as "Hanson Trays". I've fond them to be the best solution for myself but you need to have a tall enough drawer to fit them in and the 1/2 drive trays are pretty tall.
 
OP
R

red02chevy

Well-known member
Joined
Nov 25, 2007
Messages
327
My plan was to put them in the top of my roll cart and I am pretty sure it's deep enough. If you don't mind could you measure yours just so I can confirm that they will work before I buy them?
 
To avoid these ads, REGISTER NOW!
I

ihredo4

Well-known member
Joined
Sep 3, 2009
Messages
1,575
Location
100 miles W of Daileyville in Idiotnois
O'Reilly's has the 1/4 and 3/8 in stock. Not sure if they can order ones for 1/2 or not. I believe they are less than $10.00 each also. Checked today and both the 1/4 and 3/8 Hansens are $9.99 each. The have to special order the 1/2 and they are $11.99 each.
 
Last edited:
P

pfbz

Well-known member
Joined
Dec 17, 2008
Messages
959
Note that these are "Hansen" trays. Not "Hanson" trays. Hanson is also a tool maker, but they don't make these...

If you have the right space for them (deep drawer, low enough that you can drop them in from the top) they work nicely.

I use several. Here's a (apologize, blurry) pic of my metric socket drawer.
715150717_iGUfx-M.jpg


Here's a link to Hansen Tray's on the Sears Web site.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom