ScottsGT
Well-known member
Thinking about one of these for a stand alone cabinet to store ammo in. Anyone know if the shelves inside are sold through HF parts? I’d like to add one or two more.
Last edited:
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
HF 16” end cabinet question
- Thread starter ScottsGT
- Start date
Bretny
Well-known member
Ammo is pretty heavy stuff. I would not expect a harbor freight cabinet that s hanging off one side to stay square.
Bogie1632
Well-known member
If you mean the 64157 model the parts list online doesn't show a shelf available.
https://www.harborfreight.com/parts
You'd likely have to call and see if you can get one (not likely) or have a local shop bend up a couple for you (easy).
Good luck.
V/R
Bogie
https://www.harborfreight.com/parts
You'd likely have to call and see if you can get one (not likely) or have a local shop bend up a couple for you (easy).
Good luck.
V/R
Bogie
Why not plywood?
Sent from my SM-N960U using Tapatalk
It looks like the bent shelf edges lock down into slots. Can't get plywood to go down into the slots. That being said, I might be able to find some18 ga angle and screw it into the plywood and lock it into place like that.
Just spitballing right now. Still need to swing by HF and see if this will work for my needs.
DwightS
Well-known member
It may still be an option to order a "replacement" shelf.
https://manuals.harborfreight.com/manuals/parts/HFT_Specials_Order_Parts_2019-11-27.pdf
https://manuals.harborfreight.com/manuals/parts/HFT_Specials_Order_Parts_2019-11-27.pdf