Askme42
Well-known member
Clearanced but only 2xl size.
Home Depot Clearance Thread 2015
- Thread starter CarsonConcepts
- Start date
- Status
Clearanced but only 2xl size.
morgantm
Well-known member
Woo got the last one in my district today, lucked out and it was the floor. Nice upgrade from my 715
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
cagullett1
Well-known member
I got 2 of these a week ago (one for dad and one for myself) for $239 each. I wonder if they will price adjust. Looks like I'm going to the store today to find out!
Ive never had a problem price adjusting, even clearance stuff. I was always within 30 days (like you are) which is their normal price adjustment policy. Not sure what happens between day 30 and 90, while you can technically still return it but you are outside the price adjustment range.
Same here, I did just pick one up though....have to figure out how to return/rebuy online/in-store to end up with a medium or large.
Right on about having a slightly more snug fitting hoodie to feel the heat. Wearing the hoodie under a windbreaker helps a lot to retain the heat. Too bad they don't shrink a bit since they feel like a cotton blend.
Just noticed that Medium (or even Large) are no longer available online. Doesnt look like I can swap it out if they cant get them.
Wonder if a local store happens to have one....seriously doubt it though. I might have to return mine, or bulk up
Wonder if a local store happens to have one....seriously doubt it though. I might have to return mine, or bulk up
Slim pickings around here for smaller hoodie sizes. Did you know they would have triggered the 150 promo because it was on the flyer? Got mine earlier in the season and price adjusted as the price decreased but not sure how online would work since they charge more.
Caparris
Well-known member
The sizes are weird IMO
I got a medium.. I wear medium on all my other sweatshirts. It was pretty big when I got it. So, I washed it thinking it might shrink some and end up about right.. it's now too short (constantly rides up) and too big around (so it's not tight around my chest where the heaters are).. I guess my belly isn't big enough, lol. I'm not that out of the ordinary. 6 ft'ish, 150lbs or so.
I would really really love to have one that fit well though. They work great
If you get one of the M18 USB adapter things, it has an output that the hoodie can connect to. You won't be able to fit any big batteries, but even the smaller M18 batteries do really well on the sweatshirt. I was outside working in sleet a few weeks back with this thing on and it kept me pretty warm
It was weird though.. I didn't even really notice it being hot on my chest or anything, I was just warm and comfortable enough to work.. then when the battery ran out it got COLD. I guess the heaters being near your core is why that was the case
Last edited:
Yeah I figured they would have triggered the promo, but at the time I could use the 99 for better things instead
I dont work outside TOO often, but as I snowblow I notice that a heated hoodie might work better than 3 layers of sweatshirt and jackets making me sweat like a pig.
Im not sure where else sells/stocks these things, so I dont exactly have a lot of options.
fourjeepin
Well-known member
Saw these on clearance today (02886, in store only) for $25. Poor reviews, but it's basically the same as the HF 50ft reel that's $59 with a coupon.
http://www.homedepot.com/p/Amflo-Re...ith-50-ft-Rubber-Air-Hose-505HR-RET/202205324
Very good price, but do yourself a favor and stay away. I have this one and it earned that 2 star rating.
Wow. That's getting so cheap I'm wondering if they are about to change designs???
Sent from my iPhone using Tapatalk
I hope not, I think these are the same deal as with the ryobi batteries that are cheap now. I've only got an impact that's 12v ridgid so I won't be too screwed but I was really hoping they would increase the offering of tools, not dump em!
Sent from my SM-G900V using Tapatalk
rsieracki
Well-known member
I got the Dewalt dws782 for 200 less a HF 20%... neither cashier's ever saw or heard of harbor frieght before but himmed n hawwed and took the coupon just off me asking... i'm pretty excited i got a new toy
now to get a stand
now to get a stand
Caparris
Well-known member
I got the Dewalt dws782 for 200 less a HF 20%... neither cashier's ever saw or heard of harbor frieght before but himmed n hawwed and took the coupon just off me asking... i'm pretty excited i got a new toy
now to get a stand
Nice. What was the total out the door? $180'ish?
cagullett1
Well-known member
Picked up the 2 dws782's I ordered a week or so ago from a random store 30 minutes outside of Austin (travelled here for work this week). It was pretty comical trying to load 2 of them in a 2 door Honda Civic. We ended up removing the passenger seat out of my car to get 1 of them in the backseat, put the passenger seat on top of that box, and my coworker road in the backseat with next to it. The second one went where the front seat was supposed to go. These things are HUGE!
Last edited:
Lol same here. Sent the wife a hundred miles away to pick ours up and it JUUUUST fit in the jeep. Whew it was close! That woulda sucked. She's a trooper tho!
06 DIESEL
Well-known member
Stopped at the Home Depot in Middle River, MD last night to get a few things. Ran into a friend that has a contracting business. Told him about the saws and he was interested so we looked. Found three in the overhead and he bought them all for his business. The lady that did the price check for us was very confused as to how they were that cheap ($200.04). He thanked me I bet a dozen times. Three of them and a gang box fit fine in a 8' truck bed.
Askme42
Well-known member
If I can find one of the table saws today Im buying one.
I have a pickup truck, but it should be real fun tossing the table saw box into the bed thats full of 1.5' of snow
I have my brother hunting one down for me hopefully. Should be interesting in his Elantra.
Delfonik
Well-known member
HAHA! When there's a will, there's a way. Was the 2nd one for your coworker?
MattPSC
Well-known member
12" sliders are HUGE. No wonder they have a lot left over.
Wish I could find the compact table saw. With getting a track saw recently my Bosch 4000 seems like overkill for the narrow rips I do and it sure takes a load of space.
Wish I could find the compact table saw. With getting a track saw recently my Bosch 4000 seems like overkill for the narrow rips I do and it sure takes a load of space.
hrvitalijr
Member
- Joined
- Aug 29, 2009
- Messages
- 15
So you were able to call a store and verify that they had one in stock? Did you use the sku when you called? I haven't had any luck doing this. Everyone I talk to just checks the website
Yes I gave them the SKU and got a really helpful hardware guy. I asked if I could pay over the phone and he said they didn't do that. So I said look man my wife is driving a hundred miles is there any way you can hold one for me. He said tell her to ask for me and I'll take care of you.
morgantm
Well-known member
You have to get them to look it up on the PDA, for some reason those show more accurate stock than the computers they use.
was the 14 pc Milwaukee hole saw kit in the clearance shelves where you were? Or are they just in the milwaukee tools area? also, do you know if home depot would price match? I looked online and it's showing $31.90 in my HD stores.
Last edited:
hrvitalijr
Member
- Joined
- Aug 29, 2009
- Messages
- 15
It was on an end cap with other misc. clearance stuff. The 14 piece version of Milwaukee hole saws was the Black Friday special that sold for about $30.
They also carry the regular 13 piece hole saw kit in stores but that is going for $79. The main difference between the two kits is the Black Friday special had two less hole saws (missing the 1 1/4" and 1 3/4" but had two more 1/4" pilot drill bits).
The boxes look very similar so I would check both areas at the store but look at the picture on the front - if it is missing two hole saws, you got the Black Friday/14 piece/Clearance version. SKU for the clearance ($20.04) version is 1000-015-983.
Not sure about the price match from online but you should be able to check in-store inventory using the SKU. Seems like I've read that in-store pricing can be different than on-line (which appears to be the case here).
They also carry the regular 13 piece hole saw kit in stores but that is going for $79. The main difference between the two kits is the Black Friday special had two less hole saws (missing the 1 1/4" and 1 3/4" but had two more 1/4" pilot drill bits).
The boxes look very similar so I would check both areas at the store but look at the picture on the front - if it is missing two hole saws, you got the Black Friday/14 piece/Clearance version. SKU for the clearance ($20.04) version is 1000-015-983.
Not sure about the price match from online but you should be able to check in-store inventory using the SKU. Seems like I've read that in-store pricing can be different than on-line (which appears to be the case here).
Last edited:
Palmer812
Well-known member
Stopped by the Cornelius NC store to take a quick look around and saw a box up top with the special buy label. It was the table saw for $150 so I gave it a good home.
[/URL][/IMG]
SpyderGiant
Well-known member
Stopped by the Cornelius NC store to take a quick look around and saw a box up top with the special buy label. It was the table saw for $150 so I gave it a good home.[/URL][/IMG]
Score. I've looked at those myself to replace my cheap small craftsman, but I didn't like that most can't use a dado stack.
Caparris
Well-known member
Stopped by the Cornelius NC store to take a quick look around and saw a box up top with the special buy label. It was the table saw for $150 so I gave it a good home.[/URL][/IMG]
Nice! I've avoided calling to check on the table saws at the store I bought the compound miter from, lol
wizness
Well-known member
What's the SKU on the table saw again?
Palmer812
Well-known member
I can look in the morning if nobody else answers. I am at home and I left the saw at my work. I know the model was DW745
136-489
carczar_84
Member
All the stores around the sacramento area showed no stock for the miter saw. I decided to swing thru one that is on my way home today. They had 1 DWS782 out of the box, but still in the plastic under the DWS780. The employee working the tool department thought it was the 780 and that someone opened it for display, not realizing they already had one out. Once he realized it was the clearanced model, he laughed and said one of his coworkers was going to be pissed because he had been looking for that saw.
Got the saw for $180 because it was open box!!! Super excited!! By the time I sell off my old 12" non-slider dewalt, I won't be out very much for a really nice saw.
Got the saw for $180 because it was open box!!! Super excited!! By the time I sell off my old 12" non-slider dewalt, I won't be out very much for a really nice saw.
wizness
Well-known member
FYI the League city TX store is out of the miter saws. I went buy again today and one was still there. Called my buddy and he picked it up. I'm surprised it lasted a few days.
Caparris
Well-known member
Nice!
I may break down and call some of the local stores about the table saw tomorrow. I doubt they'll bother looking though, so I may just have to run by there.
- Status