To avoid these ads, REGISTER NOW!

Home Depot Clearance Thread 2015

Status
Not open for further replies.
To avoid these ads, REGISTER NOW!

LoveOldIron

Well-known member
Joined
Apr 19, 2015
Messages
562
I went from Philly to Westminster, Md. yesterday. Besides the 27 assorted boxes of Hitachi nails I posted about yesterday, I also picked up 6 18g brad nailers, 2 18g finish staplers, and 1 15g FN finish nailer. All Bistitch.

I also picked up a few of these Husky 15" tool bag/sack combos for $9. http://www.homedepot.com/p/Husky-15-in-Tool-Bag-and-Utility-Sack-Combo-Red-82037N12/203418609 These were in the Westminster, Md store, and they still had a case of them left, if anyone is interested. In the back left corner of tools, a few shelves up.
 

aelb771

Well-known member
Joined
May 29, 2011
Messages
147
Were the Bostitch nailers one cent? Do you happen to have a pic, or just the model numbers?
 

LoveOldIron

Well-known member
Joined
Apr 19, 2015
Messages
562
The nailers were between $27 & $48. I don't have the numbers handy right now, but they've been posted in this thread.
 

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
lol just realized the sticker on the mosquito traps were from 2013!

I may have to take another trip and verify these.

Just tried these mosquito traps. Not found when scanned at SCO. There was no store manager and the corporate customer care wasn't open yet. They wanted to sell it at $62 under a generic SKU. Will update after I call customer care to get the policy on items that don't show up at all on the inventory, even at penny status.



Edit: no go. Customer care confirmed that if it scanned as a penny I would have got it for a penny. But because it's not in their system they can't sell it
 
Last edited:

06GMC5.3L

Well-known member
Joined
Jul 24, 2015
Messages
1,776
Just tried these mosquito traps. Not found when scanned at SCO. There was no store manager and the corporate customer care wasn't open yet. They wanted to sell it at $62 under a generic SKU. Will update after I call customer care to get the policy on items that don't show up at all on the inventory, even at penny status.


Been to somersworth lately?


Sent from my iPhone using Tapatalk.
 

REXAMUS

Well-known member
Joined
Jan 29, 2013
Messages
205
Location
North Carolina
Finally found a store with stock but couldn't manage to find one.... :(
 

Attachments

  • 11949599_10204652193770315_1559352236_n.jpg
    11949599_10204652193770315_1559352236_n.jpg
    70 KB · Views: 143

aelb771

Well-known member
Joined
May 29, 2011
Messages
147
Just got a couple of these for a penny
062d09fdf6c6fb0381c470f046c99577.jpg



Sent from my iPhone using Tapatalk
 

elronin

Well-known member
Joined
May 26, 2012
Messages
1,261
Location
Hialeah,Fl
I went from Philly to Westminster, Md. yesterday. Besides the 27 assorted boxes of Hitachi nails I posted about yesterday, I also picked up 6 18g brad nailers, 2 18g finish staplers, and 1 15g FN finish nailer. All Bistitch.

I also picked up a few of these Husky 15" tool bag/sack combos for $9. http://www.homedepot.com/p/Husky-15-in-Tool-Bag-and-Utility-Sack-Combo-Red-82037N12/203418609 These were in the Westminster, Md store, and they still had a case of them left, if anyone is interested. In the back left corner of tools, a few shelves up.

I've seen the husky bags in the cleaner section 9 bucks isn't bad
 

kneeman

Well-known member
Joined
Mar 12, 2014
Messages
1,704
If you are buying for yourself to install a TV don't waste more than a penny on them. They are ways that are cheaper or free and only require one hole in the wall not two.

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 

06GMC5.3L

Well-known member
Joined
Jul 24, 2015
Messages
1,776
Successful haul today on the faucet rebuild kits mentioned a while back. Also T8 bulbs for the clearance fixtures I picked up.

e2a3105c9abf45dff614688ec93d37af.jpg
b4e84815955c90c7832e5975d119308a.jpg
a86e0a722d7483ee895c254cbb2c526b.jpg
2127bd3dc1a5bcc2c9b9dcd60dbd5d67.jpg

One of the faucets (clearance tag) was buried on a clearance shelf and the other two were on the top shelf above the faucets. Didn't even bother asking for help, just got them down myself.

Sent from my iPhone using Tapatalk.
 
Last edited:

06GMC5.3L

Well-known member
Joined
Jul 24, 2015
Messages
1,776
I picked up 2 of the ones with the "conduit" for a penny a month or so back.


Sent from my iPhone using Tapatalk.
 
To avoid these ads, REGISTER NOW!

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
Just tried these mosquito traps. Not found when scanned at SCO. There was no store manager and the corporate customer care wasn't open yet. They wanted to sell it at $62 under a generic SKU. Will update after I call customer care to get the policy on items that don't show up at all on the inventory, even at penny status.



Edit: no go. Customer care confirmed that if it scanned as a penny I would have got it for a penny. But because it's not in their system they can't sell it

I'm getting sick of correcting their lazy inventory problems AND getting attitude from their employees in the process. Not even the courtesy of a 10% discount coupon from customer care. Bleh. On a positive note, found 10 more Hitachi fuel rods at a penny each lol
 

Rm2728

Well-known member
Joined
Jul 13, 2015
Messages
227
I'm getting sick of correcting their lazy inventory problems AND getting attitude from their employees in the process. Not even the courtesy of a 10% discount coupon from customer care. Bleh. On a positive note, found 10 more Hitachi fuel rods at a penny each lol


Agreed. In my encounter yesterday, I gave the cliffs notes version of the conversation. The part I omitted, He said something about when they ring up a penny, it's a problem. My response was yes, the problem is your employees didn't remove the product from the shelf like they were supposed to.

[emoji16]
 

elronin

Well-known member
Joined
May 26, 2012
Messages
1,261
Location
Hialeah,Fl
If you are buying for yourself to install a TV don't waste more than a penny on them. They are ways that are cheaper or free and only require one hole in the wall not two.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

yea that's what I use to think, but this leaves a clean install, I run 4 HDMI cables trough it and it brings its own power cable.

My old way of installing flat screens, was with two wall plates, and a Thick 6 food extension cord. This leaves a nice looking set up. Under 20 bucks its a good deal.
 

06GMC5.3L

Well-known member
Joined
Jul 24, 2015
Messages
1,776
yea that's what I use to think, but this leaves a clean install, I run 4 HDMI cables trough it and it brings its own power cable.

My old way of installing flat screens, was with two wall plates, and a Thick 6 food extension cord. This leaves a nice looking set up. Under 20 bucks its a good deal.


What I was thinking when I picked up two.


Sent from my iPhone using Tapatalk.
 

kneeman

Well-known member
Joined
Mar 12, 2014
Messages
1,704
yea that's what I use to think, but this leaves a clean install, I run 4 HDMI cables trough it and it brings its own power cable.

My old way of installing flat screens, was with two wall plates, and a Thick 6 food extension cord. This leaves a nice looking set up. Under 20 bucks its a good deal.
Use the existing power outlet hole to run the wires through on the bottom and cut one round hole behind the TV.

If the power outlet is between different rafters than the hole behind TV still just cut a hole behind the TV and for the bottom you can get a hole plate for 5 bucks.

If buy these for a penny all day

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 

aelb771

Well-known member
Joined
May 29, 2011
Messages
147
Thanks for the pics. I'll be sure to keep an eye out. I've been searching relentlessly for one of those Milwaukee impact drivers, but I've had no luck!


Sent from my iPhone using Tapatalk
 

coralnut

Banned
Joined
Jun 16, 2015
Messages
444
Location
Chicagoland
the 2653-22CT are long gone. i think you're wasting your time on them. most of those went to employees. i searched 30-odd stores and I was only able to find one of them, and it was in an employee's hiding place. the tool girl laughed when i got filthy crawling under a display and found one. as i was crawling back out i heard her mutter, "John is going to be pissed." John was obviously hiding it until it pennied out.

I've been looking for a coil framer for months. The ones I found were $269 only 4 days ago, and were pennied out today. The store that had them never took them to $140-something or to $68.02, they went directly from $269 to penny in 4 days. I bought 2 and left 2 behind for some lucky shopper.
 

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
the 2653-22CT are long gone. i think you're wasting your time on them. most of those went to employees. i searched 30-odd stores and I was only able to find one of them, and it was in an employee's hiding place. the tool girl laughed when i got filthy crawling under a display and found one. as i was crawling back out i heard her mutter, "John is going to be pissed." John was obviously hiding it until it pennied out.

I've been looking for a coil framer for months. The ones I found were $269 only 4 days ago, and were pennied out today. The store that had them never took them to $140-something or to $68.02, they went directly from $269 to penny in 4 days. I bought 2 and left 2 behind for some lucky shopper.

More than likely 2 for the dumpster. I can see being nice and leaving clearance items, but leaving penny items is a waste. Either it's gonna get tossed, or some customer is gonna try to buy it and get a load of **** from the cashier lol. Even if you're not gonna sell them, surely you must have a friend/family/good coworker to give it to
 
Last edited:

krux

Well-known member
Joined
Jan 21, 2012
Messages
468
Location
na
the 2653-22CT are long gone. i think you're wasting your time on them. most of those went to employees. i searched 30-odd stores and I was only able to find one of them, and it was in an employee's hiding place. the tool girl laughed when i got filthy crawling under a display and found one. as i was crawling back out i heard her mutter, "John is going to be pissed." John was obviously hiding it until it pennied out.

I've been looking for a coil framer for months. The ones I found were $269 only 4 days ago, and were pennied out today. The store that had them never took them to $140-something or to $68.02, they went directly from $269 to penny in 4 days. I bought 2 and left 2 behind for some lucky shopper.
Damn wish we were friends you are the king of the deals lol
 

kneeman

Well-known member
Joined
Mar 12, 2014
Messages
1,704
Yeah I'd love a coil nailer. I would have sent you a pre paid shipping label plus extra for your time.

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom