Homemade Humble Roll-A-Round Work Bench

[Lorydr]

I built this roll-around about a month ago. It might not be exact square, but it should be quite sturdy.

 

[Rusted Nut]

Nice. You need to buy some new tools for it now.

 

[Mandres]

Definitely AI generated. I know because the top isn't covered up with misplaced tools and half-finished projects

 

[Kaizen]

Recommend plywood be attached to the inside of the legs on the back looking at this picture. It will strenghten the racking tremendously. Then you can hang tools on the outside of it as well. If you have more add 3/4 to top of that as well. glue and screw from below. Mass will help when hammering on stuff.

 

[karoc]

Nice job, something simple but it’s big help.

 

[Jinks]

I built a similar rolling work table years ago for my shop. It has been, & still is, one of the most useful things in the shop. Yours will probably be the same.

 

[captain14]

I like it.

How do thr wheels do when you have the bench loaded?

Might think about a wheel upgrade on some point. Not sure if your driveway is paved or dirt/gravel.

 

[denis4x4]

I did two benches similar to that one with a 4' x 6' top and 4"x4" legs. One is topped with galvanized tin. Biggest advantage is working on large projects where it's easier to walk around a project than trying to turn the project.