Honda Undertray Screws

[Chipm]

Here is an easy one for Honda guys: what is the best tool for the quarter-turn fasteners on a Civic undertray? I have been using a big flathead, but it is not a great fit. Do I need a huge flathead?

 

[darkzero]

I don't work on Hondas anymore so not sure what the clips look like these days but a faucet driver comes to mind. If they are a curved profile in the slot then a coin driver or dzus fastener tool would work.

Here are mine. The one on top is known as a faucet driver. I bought the Anex one since it had a hex drive so I could use it with whatever handle I want. The PB Swiss is meant for camera equipment but I just use it for various wide sloted fasteners.

 

[YesIHaveAHammer]

Coin driver

コインドライバービット 18×1.5×110mm | ANEXブランドのドライバー・工具メーカー アネックスツール（株）

www.anextool.co.jp

Faucet driver
110mm https://www.anextool.co.jp/item/ahf-1511/
150mm https://www.anextool.co.jp/item/ahf-1515/

Difficult to obtain at reasonable prices in Europe unfortunately.

 

[darkzero]

Coin driver

コインドライバービット 18×1.5×110mm | ANEXブランドのドライバー・工具メーカー アネックスツール（株）

www.anextool.co.jp

Faucet driver
110mm https://www.anextool.co.jp/item/ahf-1511/
150mm https://www.anextool.co.jp/item/ahf-1515/

Difficult to obtain at reasonable prices in Europe unfortunately.

The TOP TWD-45 & TRD-45 are what I initially wanted to buy but I ended up getting the Anex ones. At the time when I got mine the TOPs & Anex were only available from Japan but I have seen em on Amz.US now, not sure about Europe.

The TOPs are also available in longer versions.

Amazon | トップ工業 (TOP) 水栓 マイナスドライバー スタビータイプ 先端ワイド 混合栓 ストレーナー 掃除 止水栓 混合栓 水道 水栓 配管工事 TWD-45 燕三条 日本製 | 洗面水栓

トップ工業 (TOP) 水栓 マイナスドライバー スタビータイプ 先端ワイド 混合栓 ストレーナー 掃除 止水栓 混合栓 水道 水栓 配管工事 TWD-45 燕三条 日本製が洗面水栓ストアでいつでもお買い得。当日お急ぎ便対象商品は、当日お届け可能です。アマゾン配送商品は、通常配送無料（一部除く）。

www.amazon.co.jp

Amazon | トップ工業 (TOP) コインドライバー スタビータイプ 先端アール形状 カメラ バッテリー 閉開 TRD-45 燕三条 日本製 | ドライバー

トップ工業 (TOP) コインドライバー スタビータイプ 先端アール形状 カメラ バッテリー 閉開 TRD-45 燕三条 日本製がドライバーストアでいつでもお買い得。当日お急ぎ便対象商品は、当日お届け可能です。アマゾン配送商品は、通常配送無料（一部除く）。

www.amazon.co.jp

 

[Wrench97]

I just use a big flat head screw driver, of course most after a couple years are so bent up they're trash.

 

[Outlier]

I use a dzus fastener tool for those for the simple fact that I got one for free but I don't see why a faucet driver wouldn't work just as well.

 

[Kurt4440]

I modified a Channel Lock bottle opener that came with a set of screwdrivers I purchased on clearance.

It looks similar to this.


Geez, I just realized how frugal I sound.

 

[Steel_Rain]

Geez, I just realized how frugal I sound.

Damn. You cheap son of a *****!