Honeywell v8043f Zone Valve wiring advice

[craigibc]

Hi,

I am trying to connect the zone valves to the new boiler I installed a few weeks ago.

here is the setup and I hope you might be able to offer some advice.

3 zones

Here is what I need to confirm how it should be wired. I did watch a few youtube videos and some specs and it seems to be a little confusing so thanks in advance for your help.

1. Where do I wire the boiler do on the first zone valve?
2. Where do I connect the transformer on the first zone valve?
3. What is the best route to connect them in series?

Thanks,

Craig

 

[yeldogt]

What kind of boiler ? What type of control does it require?

Did you read and follow the boiler instructions ?

The old school way with a cast iron boiler -- the boiler control works off the zone valve end switch to start the pump.

There are different ways to start the boiler. Is there a pump control or zone valve control?

 

[craigibc]

The boiler is a Noritz CB199 and the wire is connected correctly to the boiler and the boiler will fire and work by crossing the wires coming from the boiler. It is all fired electronically.