SKINNER
Well-known member
$550 OBO. Also interested in trades - let me know what you've got.
WF Wells A7 horizontal bandsaw. Located in Southern Indiana.
I've owned this saw for 3 years, it has seen very little use. Owned by a hobbyist before me & used in his airplane hanger for doing small airplane repair & fabrication.
Call (812.664.5418) or e-mail (bhaight @ gmail.com) with any questions.
Specs:
• Capacity:
Rectangle @ 90° 7" x 11"
Rectangle @ 45° 4" x 4-3/4"
Weight 1,000 Lbs
• Blade:
Width 1/2"
Thickness 0.025"
Length 95"
• Blade speeds:
Number 4
Range (FPM) 60 to 180
• Blade tension (manual)
• Blade guides (ball bearing)
• Vice (manual)
• Sawing force (counter balance)
• Motor:
Voltage 115
Amps 10
Cycle 60
Horsepower 1/2
• Work bed height 22-1/2"
• Work support in feed:
Width 9-1/2"
Length 11"
• Work support out feed:
Width 2-1/4"
Length 5"
WF Wells A7 horizontal bandsaw. Located in Southern Indiana.
I've owned this saw for 3 years, it has seen very little use. Owned by a hobbyist before me & used in his airplane hanger for doing small airplane repair & fabrication.
Call (812.664.5418) or e-mail (bhaight @ gmail.com) with any questions.
Specs:
• Capacity:
Rectangle @ 90° 7" x 11"
Rectangle @ 45° 4" x 4-3/4"
Weight 1,000 Lbs
• Blade:
Width 1/2"
Thickness 0.025"
Length 95"
• Blade speeds:
Number 4
Range (FPM) 60 to 180
• Blade tension (manual)
• Blade guides (ball bearing)
• Vice (manual)
• Sawing force (counter balance)
• Motor:
Voltage 115
Amps 10
Cycle 60
Horsepower 1/2
• Work bed height 22-1/2"
• Work support in feed:
Width 9-1/2"
Length 11"
• Work support out feed:
Width 2-1/4"
Length 5"
Last edited: