Hose Clamp Organization DIY

[uscarry45]

How are you storing hose clamps? Anyone have any inventive ways of keeping them organized. I see racks on ebay for 30.00 plus without any clamps or a rack full of clamps in the 100.00 range. I have a lot of new and used hose clamps to store--let me know / see how you do it. Thanks

 

[tjdux]

How are you storing hose clamps? Anyone have any inventive ways of keeping them organized. I see racks on ebay for 30.00 plus without any clamps or a rack full of clamps in the 100.00 range. I have a lot of new and used hose clamps to store--let me know / see how you do it. Thanks

I just have a decidcated box on the shelf... maybe i dont have enough to really need special storage though.

Signiture; Check out my garage progress http://www.garagejournal.com/forum/showthread.php?t=352703

 

[like2wheel]

https://www.napaonline.com/en/p/BK_8271175

 

[four.cycle]

I keep them all in a big clear plastic jar with a huge lid - like the ones you'd buy full of nuts from Costco. Works just fine.

 

[jask]

parts bin, with a big freezer bag for all the 2" and smaller ones, I also have a couple nutdrivers and screwdrivers in there so I can just take the bin to the project when I am in the garage.

 

[kbeefy]

https://www.napaonline.com/en/p/BK_8271175

I have a slightly larger version of this....

 

[nes999]

For the most part my hose clamps come in boxes so I just store the boxes on a shelf

Sent from my VS985 4G using Tapatalk

 

[fsae0607]

I bought the rack and mounted it overhead on the wooden beam in my garage. Works well.

 

[outlawz2004]

I just put them all in a clear plastic container with locking lid. Seems to work good and keeps them all in one place

 

[cliftonbros89]

I don't have to use or replace hose clamps very often so I just keep them in the storage drawers with the rest of my hardware. I just keep one size per drawers bigger clamps I usually get by the box so they stay in the box or off to the side in a bun

I've considered getting a rack but I didn't have a good place to put it. Plus the fact that I more often use more of the larger sizes that the smaller sizes that are on the racks.

 

[Racer_X]

I have several of these stuck into my pegboard:

https://www.lowes.com/pd/Project-Source-Steel-Pegboard-Hook/50218543

Each one has a different size of clamp on it. It makes it easy to see/choose from the various sizes.

 

[uscarry45]

Thanks for all the suggestions

 

[Richard Cranium]

I have one like the Napa on.

 

[theoldwizard1]

I just have a couple of those red plastic bins. I don't stock that many so one bin is for small-medium and the other is medium-large. The extra large are stacked on top.

 

[unslow1]

Mine are on a couple of the really long pegboard hooks.