how many tool boxes do you have??

[chopper1]

Over twenty, including seven Snap Ons plus a Snap On cart. I like storage!

Who's side box is attached to the blue box? I picked one up off CL for $5 but there are no markings to identify it.

 

[84TurboBuick]

Down to just one box now.....

 

[NY Old Guy]

I have 2 new tool boxes (they're both old though):

PS my wife is now starting to give me a wee bit of attitude about keeping both tool boxes lying around in the foyer. I'm like, what ????, they look good there. I still have to clean them and recondition the slides with grease. Yippee.

 

[Monte]

only two:

 

[Theloniousmonk]

OK monte... how many boxes of tools do you have then.

I have two - waterloo maggie stack for work and a cman b/b 26" stack for home.

 

[Monte]

OK monte... how many boxes of tools do you have then.

I have two - waterloo maggie stack for work and a cman b/b 26" stack for home.

a drawer cabinet with tools in the hobby garage, tools in the garage at home, 2 drawers with tools in my bedroom, a couple (...of tools - not boxes of tools ) in the home office...

 

[BiltFordTuff]

Down to just one box now.....

i love that setup right there

 

[gsport]

i love that setup right there

yep.... that looks nice indeed.

 

[fflintstone]

6 metal ones that I can count off the top of my head. two 40" bottoms that I use. 3 vintage remlines I am going to clean up and sell. an one 40" top I dont know what to do with.

 

[jethro29]

1 snap-on ( mr big) and 1 snap-on roll cart at work and 2 krl's and 1 roll cart at the home shop.

 

[air]

Home garage here...I have two I guess. Minus car and in the house stuff.

One old Snap On KR557 cab for hand tools and other 'good stuff', and a Kmart bought no name bottom and top half for consumables and other junk.

 

[mkdive]

only two:

There is no damn way all those hundreds of nice screwdrivers fit into just those two boxes! JS

 

[mkdive]

1 snap-on ( mr big) and 1 snap-on roll cart at work and 2 krl's and 1 roll cart at the home shop.

pics of the mr big box....

 

[Boiler]

I have my main 19 drawer top and bottom Mac with my mechanic tools in it in the garage, a mac top box on my workbench where incoming "new" tools get stuck until I clean them, a craftsman 40+ inch top and bottom in my laundry room where my ebay & classifieds tools reside, and a snap on roll cab in my garage for my homeowner / woodworking / etc items. And I have a 1 car garage...

 

[LGMechanical]

I have a blue westard 42" combo and a snap on krsc31 tool cart.

 

[BiltFordTuff]

My Car Quest cabinet (top for parts bins and miscellaneous, bottom for large power tools)

HF Roller Cart

Old Waterloo ontop of old Craftsman

Task Force 7 drawer

Rem line 9 drawer

Champion 2 drawer

 

[Lookin4'67Galaxieconv]

Who's side box is attached to the blue box? I picked one up off CL for $5 but there are no markings to identify it.

I don't know who the manufacturer of that sidebox is....but it's a nice little box.

 

[jjjrmx5]

Nine, not counting the several hand-held boxes and tool bags I have laying around.

That's not worthy of a "Hoarder's" cameo appearence. is it?????

LOL

 

[JC23]

I'm not quite sure. My main box has a few smaller ones on it. I have a small one for my paint stuff and I'm sure there's at least one in that pile at the back of the shop.

Here's the main one...

 

[chopper1]

Originally Posted by chopper1
Who's side box is attached to the blue box? I picked one up off CL for $5 but there are no markings to identify it.

I don't know who the manufacturer of that sidebox is....but it's a nice little box.

The only draw back that I see is lack of shelving, with only two.

 

[Vulturej]

I have 7, Vulcan, Kennedy, Charftsman, & 4 Snap On's. That's why i'm selling a couple of them. I need to find someone to dig up the mason jars in there back yard and take a couple of them off my hands.

 

[obedia-h]

I have 5 roll cabs an 2 top boxes along with 5 small carry boxes. Then there are the tool bags and tool kits. Here are a set I use at work.

 

[e30bradley]

I have... 4. A 26inch husky top box, A 3drawer Cman, a small snap on cary box, and a vintage Cman.

 

[Outlawmws]

OK, (Deep Breath)

Year Mfg. Style Drawers
1980's Kennedy Top 11
193x Kennedy Top 7
? Kennedy Top 3
? Kennedy Top 7
? Kennedy Top 3
1980's Kennedy Top 6
1970's? Park Top 3
1990's? Wood Oak Top 3
1930's? Wood, leather covered Top 6

? Kennedy Int 2
? Kennedy Int 2
? Stax-On Int 3

1940's? ? Navy Floor 24
1954 Craftsman Roller 5
1954 Craftsman Roller 3
1950's? Kennedy Roller 8
70's? M-W Powr Kraft Roller 3
70's? M-W Powr Kraft Roller 3
1980's Kennedy Roller 7
2002? Husky Roller 11
2000's Craftsman Roller 3
? Bretford Roller Stack 10
? Bretford Roller Stack 6
?? Wood Floor 8

1950's? Kennedy Box 0
1970's? Kennedy Box 0
1970's? S&K Box 0
1950's? Craftsman Box 0
1950's? Porter Cable Box 0
1970's? Porter Cable Box 0
1940's? Green Box 0


All told:
24 with drawers; 147 drawers,
7 ordinary or tool specific Boxes (Not counting any plastic here, or the little socket boxes)

31 total!

 

[darkk]

3 lower rollers,3 uppers,2 side cabinets, 6 hand carry's, 2 bucket pockets, 1 fabric tool carry, 5 plastic milk crates for tools and one steel milk crate for tools and sitting and apartridge in a pear treeeee!

 

[dodge610]

1 craftsman top,center,bottom 2 craftsman roller work centers 1 husky 5 drawer bottom. 2 HF carts 4 and 5 drawer 1 matco 3 bay bottom need one more lookin at the snappy lime green.

 

[D Force]

Eight, all keyed the same.

By d_force0 at 2011-09-03

 

[oeyniman]

I'm not quite sure. My main box has a few smaller ones on it. I have a small one for my paint stuff and I'm sure there's at least one in that pile at the back of the shop.

Here's the main one...

guess it's chock-a-block loaded,
or the wheels are in need of more air

no matter what, great set up

 

[Outlawmws]

Upadate: (From 4 weeks ago...)

Year Mfg. Style Drawers
1950's Craftsman Top 3 TBD
1980's Kennedy Top 11 Machine shop tools and measurement inst.
193x Kennedy Top 7 Misc
? Kennedy Top 3 taps and dies
? Kennedy Top 7 Electronics tech tools
? Kennedy Top 3 Plumbing
1980's Kennedy Top 6 sheet metal and sharpening
1970's? Park Top 3 Air brushes and touchup guns
1990's? Wood Oak Top 3 Leather working
1930's? Wood, leather covered Top 6 Archery and fletching tools

? Kennedy 27 Int 2 Snips
? Kennedy 21 Int 2 TBD
? Stax-On Int 3 Micrometers

1940's? ? Navy Floor 24 Fasteners and Hardware
1954 Craftsman Roller 5 Vintage/antique tools
1954 Craftsman Roller 3 Welding & bench
1950's? Kennedy Roller 8 Misc
70's? M-W Powr Kraft Roller 3 bolted to each other
70's? M-W Powr Kraft Roller 3 Wood working and base for Radial arm
1980's Kennedy Roller 7 Reloading
2002? Husky Roller 11 Automotive
2000's Craftsman Roller 3 Base for Band saw, Misc storage
? Bretford Roller Stack 10 Misc
? Bretford Roller Stack 6 Misc
?? Wood Floor 8 Tape measures and misc supplies


1950's? Kennedy Box 0 Big Whitney punches etc
1970's? Kennedy Box 0 TBD
1970's? S&K hip Box 0 S&S tools and TBD
1950's? Craftsman Box 0 Original drill
1950's? Porter Cable Box 0 Jig saw
1970's? Porter Cable Box 0 Port-a-Band
1940's? Green hip Box 0 Old small vices and anvils
1930's? Brown hip Box 0 TBD

All told:
25 with drawers; 150 drawers,
7 ordinary or tool specific Boxes (Not counting any plastic here, or the little socket boxes)

33 total!

 

[napatoolguy6908]

i have a matco 3 bay and a matco 2 bay and cornwell 7 drawer and napa 7 drawer saving up to buy a mr. big snap on box

 

[BigAl62]

I have a Snap On box at work, a Craftsman box and way too many portable tool boxes and tool bags at home.

 

[Moose-LandTran]

Two, one at work which is very nearly full, and one at home in the garage that's empty. When the one at work is full i'll take the other one there too. That'll probably be in a week or so!

 

[oeyniman]

Roller type metal cabinets:
#1: 1990 HAZET 168 standard (4-drawer, both sides accessable type)
#2: 2010 RAU, squarish and simple 1 door type stand, converted with wheels and and additional plate into my drill press and grinder cart


Wood box:
#3: 2006 shoe boy; shoe shine box (pic)


metal cantilever:
#3: 2009 FORUM mid size 5 tray
#4: 2009 FORUM 520mm 5 tray
#5: appr. 1960's no name SO-type 5 tray (in resto) (pic, as posted before)

metal boxes:
#6: 1995ish top loader with inner tray
#7: 1995ish top loader
#8: 1960ish single compartment (long)
#9: 1960ish single compartment (short, cutting torch accessory type)


Tupperware:
#10: 2000 ALDI (King Craft) with inner tray; for shoe shine
#11: 2000 ALDI (King Craft) with inner tray; for car care (outside)
#12: 2000 ALDI (King Craft) with inner tray; for car care (inside)
#13: 1990ish no name for builders stuff


fabric:
# 14: 2009 BOSCH tool bag


BOSCH systainers, BOSCHand METABO tool boxes for PTs and metal boxes for punches and chisels as well as plastic and wooden boxes for measuring tools, not counted of course

I actually got a bit scared about it, as I never counted them before.


encl.: pic posted before showing from L to R, #'s: 9; 7; 6; 13; 3; 4; 1 (barely visible); as well as #5 and #3 in the singles

 

[oeyniman]

Eight, all keyed the same.

By d_force0 at 2011-09-03

... drool.
... maybe a joint colour sceme is sth. for me to consider

 

[fitz11]

1 42" us general, 7 drawer side box, 5 drawer roll cart, 26" cman top box, 26" vintage snap-on, 26" vintage remline roll cab, 2 drawer intermediate box, and 6ish hand carry boxes all in my one car garage! Lol o and a 26" cman bottom and middle in the trailer.

So 15 total

 

[yjWrangler]

1 HF box, 1 Blue Point cart, and 1 Craftsman cart

 

[ZRX61]

All mine are pictured in my "toolbox" photo album on my GJ profile thingie... well, most of them are

 

[greasemonkey44]

a matco 4225 at work; a craftsman homeowner top and bottom; an old remline top box; and a HF 16 drawer top and bottom with a few boxes tacked on the side
they keep multiplying

 

[Steevo]

I have this set (which I purchased new in about 1978) at my primary residence, which is where most of my tools are kept:

And then I also have this set, which houses my lathe/mill tooling:

And at my other place I have a Craftsman rollaway and top box with general tools in it (no pictures), and I have four of these boxes in the shop that I am building a workbench for:

 

[jeffmoss26]

I just have one Craftsman 26" chest and rollaway. Plus a whole bunch of tool bags and boxes.