How Mnay Ratchets Can You Identify?

[freudianfloyd]

Found an ad on craigslist that has some interesting ratchets for sale. I know there are at least 3 Snap On ratchets, but they claim all of them are. Can anybody identify these?
View media item 90461

 

[ChevyEFI]

SLF80A on the bottom, maybe?
TLFH72 above it, if it's SO.
Next two, don't think they're snappy.
FLF(letter indicating hard handle)80Y maybe.
Dunno on the top fella.

Those are best guesses, and frankly, I'm not well versed in the pre-80/72 stuff.

 

[Mgdoug3]

I don't remember Snap on using snap rings. All the pear head Snap on ratchets use screws for a cover plate. I'm thinking the one's with the snap ring are Apex (Gearwrench). Maybe Husky. I remember seeing ratchets just like the black one in box stores so I know it's not a Snap on.

 

[Jordanj]

The black one is craftsman.

 

[chrisnazzy]

Assuming the 3 Snap-on ratchets are newer Dual 80's...

The yellow hard handled is a FHLFD80Y

The soft grip 1/4" is a THLF72

The 1/2" looks to be too short to be a SLF80 (approx 25") so I'd say it's a SF80A (approx 18")

I don't believe the other ratchets are Snap-on but a couple of them may be Blue Point. Either way if it were an ad I stumbled across I'd certainly want to set up a meet to check out what all the seller had for sale. Looks like an electric orange Snap-on box they're sitting on too.

Sent from my SM-G930P using Tapatalk

 

[toolmutt]

Black one does appear to a Craftsman.

 

[Blind1]

There are what appear to be six ratchets in your photo.

 

[ddawg16]

Hmmm....me thinks I don't know as much about tools as I thought....

Can you ask us to ID some guns? I can do that one.

 

[Lookin4'67Galaxieconv]

Black one does appear to a Craftsman.

Yep!

 

[freudianfloyd]

Hmmm....me thinks I don't know as much about tools as I thought....

Can you ask us to ID some guns? I can do that one.

It always amazes me how Snap on guys can give you a model number from such a small grainy picture. Every time I think I know a lot about tools, I'm blown away by the guys on this forum.

 

[freudianfloyd]

There are what appear to be six ratchets in your photo.

Well, you are not wrong.

 

[freudianfloyd]

Assuming the 3 Snap-on ratchets are newer Dual 80's...

The yellow hard handled is a FHLFD80Y

The soft grip 1/4" is a THLF72

The 1/2" looks to be too short to be a SLF80 (approx 25") so I'd say it's a SF80A (approx 18")

I don't believe the other ratchets are Snap-on but a couple of them may be Blue Point. Either way if it were an ad I stumbled across I'd certainly want to set up a meet to check out what all the seller had for sale. Looks like an electric orange Snap-on box they're sitting on too.

Sent from my SM-G930P using Tapatalk

The actual ad was for the toolbox, but when I started asking about the tools, they changed the ad and said everything is for sale. If the yellow handled one is a dual 80, I'd be interested in it. The others I will probably pass on.

 

[bonneyman]

Hmmm....me thinks I don't know as much about tools as I thought....

Can you ask us to ID some guns? I can do that one.

Wrong forum!

 

[DSLTRK]

From the top, the first and fourth are newest gen Husky. The black oxide is a Craftsman and the other three are dual80 and 72 SO.

 

[JUNK-MAN]

There are 3 snap on, 1 craftsman and im guessing the other 2 are cheap ones.

Sent from my SM-G930V using Tapatalk

 

[freudianfloyd]

I would buy the dual 80’s if they are going cheap.

He told me $50 for the yellow handle, and $90 for the 1/2" drive one. Not bad prices if they are dual 80s. Or $250 for all of the ratchets.

 

[DSLTRK]

He told me $50 for the yellow handle, and $90 for the 1/2" drive one. Not bad prices if they are dual 80s. Or $250 for all of the ratchets.

Id be all over those. Good prices

 

[country83]

He told me $50 for the yellow handle, and $90 for the 1/2" drive one. Not bad prices if they are dual 80s. Or $250 for all of the ratchets.

Looks like all the SOs are Dual80s to me, the only one I'm not as sure about is the yellow handled one.

Sent from my XT1635-01 using Tapatalk

 

[Mr Ratchet]

From the top, the first and fourth are newest gen Husky. The black oxide is a Craftsman and the other three are dual80 and 72 SO.

I think you are correct.


freudianfloyd, you buy any?

 

[MJO]

From top to bottom: junk, snap-on, junk, junk, snap-on & snap-on

 

[freudianfloyd]

I think you are correct.


freudianfloyd, you buy any?

I tried. I was in contact several times waiting on model numbers of the yellow and 1/2" drive ratchets, but they never got back to me. Maybe they sold already.