To avoid these ads, REGISTER NOW!

How to de-rust

P

polexican23

Banned
Joined
Jun 11, 2013
Messages
2,168
Location
burbs-Illinois
Hey guys, working on a 65 vw dune buggy project. I don't have access to a sandblaster or money to pay for a shop to do it. (budget build-time is not a factor)

The front axle beam is showing its age and needs a good cleaning. Mostly road grim, grease and surface rust.

Can you guys recommend products or tools to help with the clean up process? I have used a grinder with a 4" wire wheel for most of it, but lots of hard to access crevices. The pic below is what I wish it looked like.

111400025.jpg
 
To avoid these ads, REGISTER NOW!
8

8man

Well-known member
Joined
Oct 16, 2013
Messages
630
Location
Bryan, Texas
Use different style and sizes of wire wheels. I have an angle grinder, die grinder (straight and angle) and got most every nook and cranny with different cupped and straight wire wheels. Messy, labor intensive, but budget minded.
 
P

pendragon1998

Well-known member
Joined
Mar 24, 2012
Messages
3,733
Location
NE Georgia
I don't think a computer psu would provide enough juice, nor would it be easy to submerge something so big. A psu works great on smaller parts. I say locate a blaster, maybe pay a guy in a shop to hit it for you over lunch hour?
 
M

Mr.N

Well-known member
Joined
Jul 13, 2005
Messages
2,221
Location
Mpls, MN
pendragon1998 said:
I don't think a computer psu would provide enough juice, nor would it be easy to submerge something so big. A psu works great on smaller parts. I say locate a blaster, maybe pay a guy in a shop to hit it for you over lunch hour?
Click to expand...
Well I burnt through 6 different battery chargers befor moving to a computer power supply. It's outlast the longest lasting battery charger I've had.
You should be able find one free or way cheap on an old computer

Google it

Similar size part done with computer power supply: http://forum.ih8mud.com/threads/electrolysis-rust-removal-via-computer-power-supply.276034/


.
 
Last edited:
L

LumpyMusic

Well-known member
Joined
May 2, 2012
Messages
492
Location
Phoenix Arizona USA
A Campbell-Hausfeld siphon style blast gun is $12.
A bag of coal slag media is $9.
Add some kind of eye/face protection for, I don't know, another $20?

If you have a compressor already you're blastin'. Even a small, 5 gal HF compressor will do it, just requires a little wait time before refills of the air tank.


Sgt Lumpy
 
B

bartz32tt

Well-known member
Joined
Aug 23, 2012
Messages
88
Location
Iowa's capital
LumpyMusic said:
A Campbell-Hausfeld siphon style blast gun is $12.
A bag of coal slag media is $9.
Add some kind of eye/face protection for, I don't know, another $20?

If you have a compressor already you're blastin'. Even a small, 5 gal HF compressor will do it, just requires a little wait time before refills of the air tank.


Sgt Lumpy
Click to expand...

I would stay away from coal slag and sand to avoid respiratory problems. I use glass beads or aluminum oxide and always wear a respirator.
 
D

drivesitfar

Well-known member
Joined
Oct 23, 2013
Messages
35,992
Location
Pacific Northwest
Polex: i think i asked almost every question there was to ask on this thread on Electrolysis.

http://www.garagejournal.com/forum/showthread.php?t=237752&highlight=homemade+electrolysis

it's cheap and easy and maybe the best way to remove rust. for bigger items I've seen guys using huge plastic barrels and kiddie pools. an old battery charger should work fine and I've heard the power supply for an old computer works too.

you'll need to take a rag soaked in Simple green to get the grease off first or the electrolysis won't work as well.

good luck
 
E

EdT

Well-known member
Joined
Sep 21, 2010
Messages
1,104
Location
North Georgia
How wonderful are you trying to make this front end? There's probably no need to get every bit of rust and old paint off to do a very serviceable resto. If you don't have a pressure washer, I'd suggest the first step would be to take it to a DIY car wash and blast as much crud off it as you can. Then you can get a better idea of what you really have to work with. I would then disassemble it as much as you need to to accomplish your goal, whatever that is. the smaller individual parts will be easier to deal with. You can then clean them up one at a time using any of the methods suggested above. I don't imagine VW parts are as cheap as they used to be, but before you spend days cleaning up the old brake drums, it might be worth seeing how much new ones are. there's a fair chance you'll need new ones anyway. I've had good luck with Evapo Rust and electrolysis. They are both fairly slow processes, but they work well. Either would be tough slogs on the main beam structure, but should work OK on the other parts. By the time you're through saving money cleaning this up, the sand blasting may look like a bargain.
 
To avoid these ads, REGISTER NOW!
M

mrolds88

Well-known member
Joined
Feb 17, 2010
Messages
117
Location
WV
First you need to get rid of the grease buildup and road grime. Engine degreaser or oven cleaner (providing there is no aluminum there). Then pressure wash. Next step is decided by what you have available. Wire brushes get a lot of rust off but not all. If you have a compressor, then a small sand blaster will work for you. If you want to do electrolysis get a cheapy wading pool, a box of Arm & Hammer washing soda, some scrap steel parts and copper wire for your ground and a DC power supply.
 
C

clubairth

Banned
Joined
Dec 24, 2014
Messages
263
Oven cleaner is great for carbon but does not touch grease. So first degrease it the best you can. Then use oven cleaner for the remaining tough baked on carbon.

Get the real oven cleaner too. Not the fume free junk!

It must contain Sodium Hydroxide (Lye) to work properly. I use the house brand from Walmart and it works great!
.
.
.
 
OP
P

polexican23

Banned
Joined
Jun 11, 2013
Messages
2,168
Location
burbs-Illinois
planned on breaking out the pressure washer, as I was moving the mower in the shed I got zapped in the hand by 3 wasps. Hand swelled up pretty quick and looked aweful.

Clean up will have to resume next weekend.
Thanks guys for all your opinions, tips and tricks.
I will look for this:: A Campbell-Hausfeld siphon style blast gun is $12....to hit the smaller parts that may need a little more attention.

As I don't need show quality, but the front beam is pretty exposed on my dune buggy, so it will have to be a little better than it just enough.
 
I

ilovevocs

Well-known member
Joined
Jun 26, 2009
Messages
1,966
Location
Toledo, Ohio
If you don't have a pressure washer I would get a few gallons of kerosene and some red scotch bright pads. Wear gloves. This helps to remove the gunk and at the same time when your scrubbing your adding a mechanical tooth for paint prep.

I do a final clean with a wax and grease remover, hit it with a fresh scotch bright pad, and then again with wax and grease remover, mask then prime / paint. You could smooth some of the casting marks / rust with a red scotch bright on a die grinder.
 
Last edited:
M

mg283680

Banned
Joined
Jul 23, 2015
Messages
103
If you have a feed store nearby and can get molasses, put gallons in a big trash can and fill w/ water. Soak the part. Have to do that front end half at a time.
 
L

LumpyMusic

Well-known member
Joined
May 2, 2012
Messages
492
Location
Phoenix Arizona USA
mg283680 said:
If you have a feed store nearby and can get molasses, put gallons in a big trash can and fill w/ water. Soak the part. Have to do that front end half at a time.
Click to expand...

How would one dispose of the resulting water/molasses/rust gunk mixture?

Maybe pour it on the neighbors' cars that park in front of the house in that other thread?


Sgt Lumpy
 
T

trentonmakes

Banned
Joined
Aug 29, 2014
Messages
447
LumpyMusic said:
How would one dispose of the resulting water/molasses/rust gunk mixture?

Maybe pour it on the neighbors' cars that park in front of the house in that other thread?


Sgt Lumpy
Click to expand...
Lol
Just read that thread!

POR15
Powerwash to get clean, get as much rust removed as you can, paint over it with por15.

If it's exposed to sunlight go over it with a paint as the por15 will fade over time exposed to UV.

Sent from my LG-D801 using Tapatalk
 
V

VDubJoe

Well-known member
Joined
Jan 22, 2006
Messages
319
Location
New Port Richey , Fl
I use molasses all the time. Works great but takes a few days. It will remove all the rust.
I have a 45 gallon olive barrel full. One gallon to 7 gal. of water. I get it at tractor supply 7 bucks a gallon. Lasts quite a while.
Blasting with a canister gun will take forever.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom