Hydraulic Jack Rebuild

[Ado]

Hello,

I came across a Hydraulic Jack Rebuild thread here that has been closed. What I need to find is a parts source for a vintage Six Ton Blackhawk floor jack. Specifically, what I need are the small front wheels. The thin rims on mine have some really huge chips in them. I expect a cylinder rebuild kit will also be needed somewhere down the line as well. Any help pointing me in the right direction will be greatly appreciated. Thank you all for any help you can provide.

Best regards,
Ado

 

[1930artdeco]

Ado,

Here is a place to get seal kits: https://casterconnection.com/casters/vintage-casters.html , you will need to know which model jack you have or you will just have to go through all of the six ton models via the pump pictures. As far as cast/wheels go-good luck. Yo may have to find a donor or get something close.

Mike

P.S. try this place for wheels:https://casterconnection.com/casters/vintage-casters.html

 

[mikegt4]

You might try this place, they list a lot of Blackhawk parts as well as rebuild kits. They were quick to reply to my email question about a bottle jack ID.

http://www.blackhawkparts.com/blackhawk-parts.html