i bought a auto parts store

[Crazy Car Guy]

i bought out a auto parts store that had been damaged in a tornado i bought all the stuff that the boxes got slightly wet but the parts were un damageable from water.
i have gabrial shocks $20 a set or less,
moog wheel bearings $75 or less,
gabrial struts $30 each or less,
regular copper plugs $1 ea platinum or doubble platinum $1.50 ea irridum $2 each.
coils or coil packs $15 or less,
thermostats $1,
front or rear brake pads $10 a set
ignition moduals $20 or less,
sensors or key switches $5 ea,
voltage regulators $5 ea
oxygen sensors with wires cut short $5 ea if you want to take a chance on soldering your wires on em
90s chevy front axle 4x4 actuator $5
tie rods center links sway bar links $15 or less
spark plug wires $10 a set or less even the forigen ones that come with the dizzy cap kit are $10.
i litterally have 5 tons of auto parts for sale cheap i have stuff from the 1950s to 2012 cars trucks and vans up to f 550 stuff

you must mention that your from this site i like the people here and want to help yall out

the best way to get first dibs is to call me 606-743-9852 Jason

 

[Tarheelgarage]

What store? Autozone

 

[threeputt]

Are the part numbers where you can see them? I am rebuilding a 3.3 Nissan Xterra engine-2002 year that I need everything. I doubt many parts stores carry those parts at least that what I found around here. Tom

 

[2oolhound]

We can't give you a "you ****" unless you tell us what you paid!

Can you post some photos of piles of stuff, we may just be able to spot other stuff we need.

 

[BJ42LX]

Sounds like you'll be spending a lot of time on eBay over the next couple years...

 

[toomanytoyzz]

Sounds like you'll be spending a lot of time on eBay over the next couple years...

LOL........the post office workers are going to get to know (and hate) you real soon.

I would possibly be interested in any 66-77 Ford Bronco and 74-82 Toyota Landcruiser FJ40 parts.

 

[Crazy Car Guy]

 

[DriftTech]

damn.....
i was gonna ask if you had any 1989-1994 nissan 240sx axles..... but it dosnt look like theres a way of knowing for sure

 

[Crazy Car Guy]

its over whelming to say the least thats a 4x4x4 crate full of plug wires theres 100+ lbs of seals in that bag/box theres 3 drawers of coils like that. the spark plugs alone filled a 35 gal trash can 3/4 way full my truck will haul a 20 ft shipping container weighing in at almost 5000 lbs and i had 3 loads were it was over the 5000 lbs im happy hauling some stuff was dammaged and went to scrap but 90% is here and in great shape just a little dusty and dirty. if there is any question as to if i would put it on my wife's car that she tools around with the kids in i wont sell it to you.

the good news i have it all computerized inventory so its easy to find.

i cant tell you what store i bought out but you may figure it out from the pics.

as for what i paid? ill put it this way i have scales that are built in to my roll back and the insurance paid out on everything i have

 

[Crazy Car Guy]

damn.....
i was gonna ask if you had any 1989-1994 nissan 240sx axles..... but it dosnt look like theres a way of knowing for sure

i will go through the inventory tomorrow it all has part numbers or manufacture numbers and my wife works at a different auto parts store that she can find info out on any parts im un sure of

 

[ShadowRuleZ]

You got a PM from me, I'd be interested in front wheel hubs/bearings for a 2WD 98-05 Jimmy/Blazer (I'm running those spindles on my g-body with C5 brakes).

 

[Crazy Car Guy]

got the pm replied.

im going to throw this out there there loss was $47,000 ( what i bought) i figure theres $37,000 in parts in my shop right now id take $5,000 firm for it all and help load it and include a usb stick thingy with the invintory on it

 

[beelsr]

if you've got an inventory on computer, dump it out into a spreadsheet or pdf and post it up.

 

[gtrotter]

Interested in parts for an 05+ Tacoma 4x4, 4 cylinder. wheel bearings, wear parts mainly. Clutch if you have one, too.

 

[2oolhound]

Sorry, we're not letting you sell this off as a lot.

I need plugs, leads and dist. cap for a 95 Jimmy v6 vortec. Dist cap is the flat one. It's a 4x4 and I'd be interested in any front end parts too. Maybe you should try to post that list.

 

[xurusaibobx]

how the heck are you going to be able to find parts with no part numbers on them? man thats going be one heck of a long haul to sort all that stuff out man

 

[ckadams00]

Did you buys any tools or just parts?
Be very interested in a front wheel bearing for a 2002 Ford Explorer 6cl XLT 2wd (maybe 2), plug cable set, front and rear brake pads.

Appreciate it!

 

[Crazy Car Guy]

if you've got an inventory on computer, dump it out into a spreadsheet or pdf and post it up.

ask and you shall recive the wife will learn how to do that tommrow

 

[Syndicate]

Holy moly!
What to do first? Take that (stick thingy) flash drive, put it back into your computer. Open up the file, either make a pdf file as mentioned above or at the very least make document pages and post them. We all don't really care where the heck u got it.

What WE ALL WANT, is for you to post that darn list so we can start to and order some parts at a discount over the store where u bought them or the dealer. Thank u for the pics. Patiently awaiting a list so I can shop till I drop

 

[Flatintoone]

Any Plasti-kote spray paint, or just the parts?

 

[Damian]

I need the following:

-1993 Mazda 626 4cyl (5speed) - Radiator, Timing belt w/ all necessary install items, valve cover gasket
-Any Gen III/LSX based oil filters. I'll buy them all if the price is right. This is for all GM V8's 2001+ and up.
-Trans filter kits for 00+ 4L60E (Tahoe, Silverado, Camaro, Trans Am). I'll buy them all
-2000 Silverado - Any brake parts - Shocks

I could go on forever. I'll anxiously be waiting for this list..

 

[enrare]

Do you have any parts for steering and suspension, front hubs, brake components for a 1995 Dodge Diesel 2500 4x4?

 

[rickcact]

I may not be understanding something here. From the look of your pictures, everything is out of the box, and just piled up, or in bins. How are you going to know what part goes on what vehicle?

pm sent

 

[m_hatcher]

I would be very interested in struts for 08 Hyundai sante fe.

 

[Crazy Car Guy]

this is the easiest request yet. 99 crown vic coils here are the pics squarebear. the 1 off brand has the marker pointing at it.

 

[low858]

Have any parts for an 01 BMW 325i?

 

[930dreamer]

Any parts for a 1991 Chevy Sub w/350 FI engine I'd be interested in.

 

[petefixer]

Wheel bearings, and loaded struts for my 1997 Plymouth Breeze?

 

[35mastr]

You have a PM

 

[eborcim]

Sent a pm on struts for chrysler t&c. Would appreciate reply here or pm.

 

[markw365]

Unit bearings for Jeep Cherokee 91+. ?? I'm looking at the pictures and thinking, man at least it's "organized". My dad passed away last year and left essentially an autoparts store worth of NOS VW parts. Still figuring out what's what.

Mark

 

[Crazy Car Guy]

Unit bearings for Jeep Cherokee 91+. ?? I'm looking at the pictures and thinking, man at least it's "organized". My dad passed away last year and left essentially an autoparts store worth of NOS VW parts. Still figuring out what's what.

Mark

i have 1 front hub bearing $30 shipped

 

[tjmonsen5]

DO you have any parts for 87-91 BMW 3 series?

 

[toomanytoyzz]

$5000 is an excellent deal, but as usual logistics and warehousing an inventory that size would be next to impossible to see feesible for me.

Did you get bit by a zombie??

 

[eborcim]

Sent a pm on struts for chrysler t&c. Would appreciate reply here or pm.

thanks for the reply..good luck with your sale

 

[Cheap5.0]

Cant wait to see the excel file on this.

Also id be willing to be OP would love to have more people calling him instead of PM's lol...ive sold stuff on this scale before on another site when a store closed. The PM system on this site will not handle this well.

 

[91turbogsx]

How about wheel bearing hub assemblies for a 2002 Ford F350 4x4 w/ ABS?

 

[Crazy Car Guy]

How about wheel bearing hub assemblies for a 2002 Ford F350 4x4 w/ ABS?

yes i have one new new moog (515020) $60 shipped in the lower 48. i have a lot of parts for the 350s more you buy cheaper ill sell em!



i have gotten a ton of calls and pms here im trying to work on this as fast as i can but i have about 100 orders in and am getting backed up so please be patient.

i just found the pdf on the irridum plugs i have to go back and check the requests on those

 

[DRhodes]

I would be interested in any parts for a 2005 Ford Ranger and a 2002 Chevy Cavalier.

 

[Crazy Car Guy]

ive got 02 cav struts wheel bearings brake pads plugs and wires
bout the same for the ranger insert shocks in place of struts

guys i need to know if these cars and trucks are 4x4 w or w/o abs

list of wheel bearings i have some have been sold but i will update it soon
512004
512151
512167
512229
512244
513017
513061
513062
513092
513107
513121
513124
513158
513159
513179
513189
513203
513204
513205
513206
513214
513236
515001
515003
515007
515010
515012
515013
515017
515020
515021
515024
515027
515032
515046
515050
515054
515056
515058
515061
515073
515084
515088



BRAKE PADS
215
225
249
279

325
333
336
356
360
368
369
370
376

418
430
436
459
476

503
505
507
562
576
591
593
598

601
606
623
632
641
652
655
659
667
668
673
674
679
681
683 -C-
698
699

702
711
714
721
726
727
729
730
741
748
768
774
781
782
784
785
787
790
791
792
793
794
799

802
803
804
813
815
816
817
819
821
822
824
828
830
832
834
841
855
856
856A
857
858
865
867
868
869
872
881
882
883
885
888
889
898

905
906
908
909
913
913C
914
923
924
929
931
934
935
939
945
949
954
956
957
959
965
966
967
969
973
974
976
981
995
996
997
998
999

1004
1005
1012
1021
1022
1028
1033
1035
1036
1037
1039
1040
1041
1044
1045
1046
1047
1057
1060
1066
1068
1069
1070
1071
1075
1082
1083
1084
1089
1093
1094
1095