I need help finding a relay

[Andybull]

I need two of these. They go in an Ambass A Dor garage door opener.

 

[Stuart in MN]

Googling on the FRL 263 part number turned up a bunch of people selling used ones, here's a few of them: https://www.amazon.com/gp/offer-listing/B012YBSQO4/ref=dp_olp_used_mbc?ie=UTF8&condition=used

 

[budmur]

Not to be a smart-alec, but did you try putting the numbers on the side of the relay into google?


https://www.radwell.com/Shop?source=GoogleShopping&IgnoreRedirect=true&ItemSingleId=65993049&utm_source=google&utm_medium=cpc&adpos=1o1&scid=scplp65993049&sc_intid=65993049&gclid=CjwKCAiArK_fBRABEiwA0gOOcxlc04IlwZkxU4AtMZTxELVtC9Ydw-u0Gw89MiF-YSJI7ol2jBCdAxoC8isQAvD_BwE

https://www.galco.com/buy/NTE-Electronics/R14-11A10-24F?source=googleshopping&gclid=CjwKCAiArK_fBRABEiwA0gOOc5Opyw393esVdx_S3ftwE9pJTJXi5ExMw7HtfBbcksHfdrgPsgTuOxoCKpkQAvD_BwE

https://www.ntepartsdirect.com/ENG/PRODUCT/R14-11A10-24F?gclid=CjwKCAiArK_fBRABEiwA0gOOcx5-sCjN8EXm-KfTyeqrEFlrRu8-F_kD-lpaO1VJWKjuF96sI7tMTBoCbG4QAvD_BwE

 

[teamextreme]

Looks like a standard "ice cube" relay, made by dozens of manufacturers. Just match the specs (24VAC coil, DPDT and same HP ratings) and you can source one from numerous vendors/manufacturers. We use IDEC RH2B's, but you could use Omron, Eaton, Schneider, ABB, Allen Bradley, etc, etc, etc.

 

[larry_g]

Looks like a standard "ice cube" relay, made by dozens of manufacturers. Just match the specs (24VDC coil, DPDT and same HP ratings) and you can source one from numerous vendors/manufacturers. We use IDEC RH2B's, but you could use Omron, Eaton, Schneider, ABB, Allen Bradley, etc, etc, etc.

I concur with the above. What makes your relay special is the mounting ears on the cover. If you can do without them then you will have a lot of options to choose from. If your lucky then you may be able to remove the cover from what you have and put it on the new relay.

lg
no neat sig line

 

[Andybull]

I called a few of the places that I had Googled prior to posting this request and they all said the part was no longer being manufactured, or that they didn’t stock it, although they showed it on their site.
I can do without the ears. Can someone give me the correct number for a current relay that will work? I found a couple on the Grainger site, but I’m afraid to order the wrong one.

 

[Stuart in MN]

Is there a diagram on one of the other sides that shows relay contact connections? If so, post a picture of that as well.

 

[lilredex]

If you really only need a single pole relay, this W/R one may do it (White Rodgers Fan Relay #90-293Q SPDT). There is presently one on my furnace, switching the fan.

https://www.grainger.com/product/WHITE-RODGERS-Relay-4E659

 

[teamextreme]

Potter & Brumfield K10P-11A15-24
$13 on Newark
24VAC coil, DPDT, 15A-1/3HP rated contacts
https://www.newark.com/potter-brumf...a15-24/relay-dpdt-120vac-30vdc-15a/dp/06R3605

 

[Andybull]

 

[MrSurly]

There should be a diagram on the clear part, on a side you have shown yet that has a diagram showing the operation (internal wiring) The diagram should also indicate if it might be a latching relay.

 

[MrSurly]

Try this

Graingers calls that pin base "8 pin D type" btw

 

[Andybull]

I found these with ears. Would any of these work?
https://www.grainger.com/product/OMRON-24VAC-2XC01

 

[teamextreme]

That's exactly what you need.

 

[The Cobbler]

I found these with ears. Would any of these work?
https://www.grainger.com/product/OMRON-24VAC-2XC01

That's exactly what you need.

this might be a good deal if you need 2 of them https://www.ebay.com/itm/OMRON-LY2F...h=item362ff38856:g:gwQAAOSwwI5bWRYx:rk:1:pf:0

 

[gte718p]

I found these with ears. Would any of these work?
https://www.grainger.com/product/OMRON-24VAC-2XC01

Winner