I need some help to identify a big compressor

[jdidion]

I came across a rather large compressor. It has a galvanized tank that is massive with a massive motor with dual belts. Single Phase motor. A lot of the markings are near impossible to read from what looks like paint over spray. I tried to rub off the paint and it tends to rub off the markings in the process. Here is a couple pics. The crank turns pretty easy so I'm sure it wore out. I wanted to see about getting parts to rebuild it. Tank seems solid. Just no idea on brand. I appreciate any feedback!

 

[jdidion]

It looks real similar to a Rolair 2 stage pump 7-10 HP Just can't seem to spot any model numbers.. not 100% sure where to look

 

[nine4gmc]

Try a paper towel soaked in simple green on the over spray, it will usually remove the paint but leave the tag info.

 

[jdidion]

I'll give it a shot tomorrow Thanks

 

[jdidion]

No luck on tag.. I looked all over that pump and couldn't find any numbers other than 0203. I guess when I get it home I will pull the pump and see if there is a tag on the bottom.

 

[DekeT]

You might try browsing thru one of the vintage compressor threads here on the GJ to get a match.

 

[stanleyrleonard]

https://www.google.com/search?q=rolair+air+compressor+images&espv=2&biw=1920&bih=947&tbm=isch&tbo=u&source=univ&sa=X&ved=0CEoQsARqFQoTCMy52e2-iMgCFQUSkgodj0UCfQ#imgdii=k28zX8cbvxPZOM%3A%3Bk28zX8cbvxPZOM%3A%3BNVpv24BFUwaIwM%3A&imgrc=k28zX8cbvxPZOM%3AMaybe this will help: https://www.google.com/url?sa=i&rct...KyEXzXM1mDB21lbDuQ-h-6Fg&ust=1442937412850109

Stan