Impact chuck

[SuzukiGS750EZ]

Do you guys know of a chuck that will go over a 1/2" impact anvil? I have an IR 7150 and would like to get a dill chuck and also a 1/4" adapter.

 

[reptilezs]

dewalt and milwaukee have a 1/4 hex adapter that fits a half inch gun. don't know about a drill chuck

 

[mvptrukin]

This place sells one never used it or seen any reviews:
www.cowanchuck.com/id12.html

 

[ImportTuner]

This place sells one never used it or seen any reviews:
www.cowanchuck.com/id12.html

I have it ... works great. I used it with my IR2135 to drill hole in cinder block for some solar night lights. Highly recommended

 

[neophyte]

LFA of France manufactures a keyless drill chuck for impact wrenches and hammer drills called The Endurer. The chuck supposedly has a tightening torque over 40Nm. This is a video about it.

This is the LFAusa web page for the chuck. http://lfausa.com/prod_endurer.html The web page only lists it as available in 3/8" square drive and threaded 3/8-24, but the video also lists 1/2" square drive as does the LFA Pamphlet/Flyer for the chuck. http://lfausa.com/EndurerFlyer.pdf The suggested list price is $59.89 according to the Flyer. Yukiwa, the Japanese company that manufactured the keyless drill chucks that used to be used by Milwaukee has a web page mentioning drill chucks for impact drivers. http://www.yukiwa.co.jp/e/ct/dc_for_impact02.php Yukiwa doesn't list specifics though. Neiko NOT made in USA has this "conversion chuck" listed on Amazon.com. http://www.amazon.com/dp/B0051AE85W/?tag=atomicindus08-20

 

[toolaholic]

LFA of France manufactures a keyless drill chuck for impact wrenches and hammer drills called The Endurer. The chuck supposedly has a tightening torque over 40Nm. This is a video about it.

This is the LFAusa web page for the chuck. http://lfausa.com/prod_endurer.html The web page only lists it as available in 3/8" square drive and threaded 3/8-24, but the video also lists 1/2" square drive as does the LFA Pamphlet/Flyer for the chuck. http://lfausa.com/EndurerFlyer.pdf The suggested list price is $59.89 according to the Flyer. Yukiwa, the Japanese company that manufactured the keyless drill chucks that used to be used by Milwaukee has a web page mentioning drill chucks for impact drivers. http://www.yukiwa.co.jp/e/ct/dc_for_impact02.php Yukiwa doesn't list specifics though. Neiko NOT USA has this "conversion chuck" listed on Amazon.com. http://www.amazon.com/dp/B0051AE85W/?tag=atomicindus08-20

I have the LFA 1/2 chuck and use w/ my milwaukee 9072-22 impact wrench. Works well using self feed and auger bits w/ no kickback or binding of bit in wood. Grip is tight and sometimes is hard to loosen chuck.