impact reducing extensions

[lugnut71]

looking for another length, these are the impact extensions that are 1/2" drive and 3/8" drive on male end. I have the 5 and 12" ones, that is all matco and snap on offer. Does anyone know if someone else makes one in between? thanks for any info

 

[MrSmiley]

looking for another length, these are the impact extensions that are 1/2" drive and 3/8" drive on male end. I have the 5 and 12" ones, that is all matco and snap on offer. Does anyone know if someone else makes one in between? thanks for any info

Mac maybe? I know my uncle has a long one from them. Although he has had it for years..

 

[merr6267]

SK has some available.
36"
http://www.amazon.com/dp/B00061SNGQ/?tag=atomicindus08-20
23"
http://www.amazon.com/dp/B00061SNGG/?tag=atomicindus08-20

 

[Finky198]

snap on carries them in 5",12",24",36" but there called impact adapters I will get you pt#s

The long ones are great for bell housing bolts...

 

[Bondo]

Ayuh,.... I've got a full set of Snap-ons that are only as long as necessary,...

1/4" to 3/8", or vise versa, is less that an inch long,....

3/4" to 1" is maybe 2" long,....

Then use an standard extension on it if more length is needed,....

 

[dudutzu905]

3, 5, 8" had a set for the last 3 years, have yet to break one
http://www.harborfreight.com/3-pc-long-impact-extensionadapter-60409.html

 

[lugnut71]

Guess I will look at harbor freight , I have the 5" and 12" , wanted somethin between those sizes, thanks

 

[brownbagg]

looking for another length, these are the impact extensions that are 1/2" drive and 3/8" drive on male end. I have the 5 and 12" ones, that is all matco and snap on offer. Does anyone know if someone else makes one in between? thanks for any info

i got one from snap on, mine is 36 inches long, great for the top bolts on a transmission

 

[bcradio]

Guess I will look at harbor freight , I have the 5" and 12" , wanted somethin between those sizes, thanks

Have fun with that

 

[lugnut71]

Why do you say that? I want one that is 7-9" long. harbor freight not make them anymore?

 

[Finky198]

I have had the HF ones going on about a year now with Zero issues there not for super high torque Applications anyway, being a reducer and extension both cause torque loss
but they seem to run fine on my ir2135Ti... and have yet to blowup in my face lol...nor have any of there impact extension every given me an issue Std, wobble, or adapter, ect...

heres the link to HF version
http://www.harborfreight.com/3-pc-long-impact-extensionadapter-60409.html

the comments are pretty funny on HFs website esplly the last one


I have the snappy 36" for bell housing bolt and its even labeled with a max torque rating...
snapon pt#s GAX5, GAX12, GAX24, GAX36