Insulation install pics for u pole barn guys..

[toyoguy81]

Finally got around to installing my insulation for my 24x32 pole building. I learned a lot from here and incorporated a little of everything I learned off here into mine. It was aggravating and long work, took me 8 days by myself. My fiance' grandfather helped me with the ceiling. I thought it turned out better than it would and its not perfect but im proud I did it myslef So here are a couple pics, any feedback is appreciated

 

[rburke65]

I really need to get my eyes checked......Oh....there they are! looks great. Nice job.

 

[regguy1]

What's the R value?

 

[SALIV8]

Looks great. Did the vapor barrier pose a challenge? What kinda of insulation is it?

 

[toyoguy81]

Thanks everyone appreciate it. Reg- it R-19 in walls R-30 in ceiling, Sal- vapor barrier is attached to the insulation already, I bought it from a company called Bay Insulation, they come in rolls that are precut to length and width to fit pole spacing, biggest challenge was the ceiling for sure. 6 foot wide rolls, up 12 feet in the air...not a good combo on some home made scaffolding..lol ...in the end it was worth it, definite difference from outside to inside

 

[Autorotica]

Ya done good!

Chris

 

[SALIV8]

Thanks everyone appreciate it. Reg- it R-19 in walls R-30 in ceiling, Sal- vapor barrier is attached to the insulation already, I bought it from a company called Bay Insulation, they come in rolls that are precut to length and width to fit pole spacing, biggest challenge was the ceiling for sure. 6 foot wide rolls, up 12 feet in the air...not a good combo on some home made scaffolding..lol ...in the end it was worth it, definite difference from outside to inside

Bad ***. Would you let me know where I can get this stuff? What type/name was it? Thanks a ton. Looks like great stuff.

 

[MoparTrucks]

Bad ***. Would you let me know where I can get this stuff? What type/name was it? Thanks a ton. Looks like great stuff.

x2. Thanks for posting this and it would be great to find out what it is and where we can get it. Your installation looks really clean.

 

[bazzateer]

Looks great. Will you be boarding over the walls and ceiling now?

 

[toyoguy81]

Thanks everyone, the insulation is from Bay Insulation. www.BayInsulation.Com . It is 6 inch fiberglass with vinyl vapor barrier stuck to it. It similar to Morton Buildings insulation. www.steelbuildinginsulation.com is another place with similar product. I went through Bay Insulation because they had a manufacturing plant locally here, all together insulation and extra materials like lumber I have about $1800 in the job.

 

[toyoguy81]

Bazz, i plan on osb around the entire perimeter up 48" to outlets, at bare minimum, around the corner where my 2 post is. Other than that, its going to be left open. $$$$$$$ is a major factor in this decision as is it is everything we do in life