SSCR
Well-known member
Hey guys, I just picked up my insulation (kraft face fiberglass) and had a question. I'm going to use R-19 (6.25" thick) for the roof rafters and R-11 for the walls (2X4 construction). I have a second floor loft on the garage and need to insulate between the roof rafters (2X8 construction).
Do i need those plastic vents stapled between my rafters to vent or is the 3/4" between the kraft face insulation and the roof deck sufficent? I measured the insulation and it's more like 5 and 3/4" insted of 6 and 1/4" thick so I know I have over an inch of clearence between the insulation and roof deck.
The garage will be heated only when I'm out there, maybe twice a week at the most at 65 degrees at the highest and will have the garage overhead door opened daily since I actually keep a car in there
I have no running water in there so I believe the humidity will not be like a house. I'm just worried about mold and ice dams, whatever they are. Thanks
Do i need those plastic vents stapled between my rafters to vent or is the 3/4" between the kraft face insulation and the roof deck sufficent? I measured the insulation and it's more like 5 and 3/4" insted of 6 and 1/4" thick so I know I have over an inch of clearence between the insulation and roof deck.
The garage will be heated only when I'm out there, maybe twice a week at the most at 65 degrees at the highest and will have the garage overhead door opened daily since I actually keep a car in there