To avoid these ads, REGISTER NOW!

Interior finally finished & couple projects...

Latitude42

Member
Joined
Jan 16, 2019
Messages
22
Location
S. Wis
The out building is finally 99% finished!!! Now I just need to organized all the "stuff" in want to cram into it.:willy_nil
It is 22' wide by 44' long ( we had a 1000 sq/ft restriction so these were the best dimensions I could come up with for my use). I have 2" 250 pink poly with taped seams and a 8 mil barrier under that as insulation for the slab & have run the exterior poly down 1 foot below grade to help with the outside surface of the slab. I ran 4/250' loops of 1/2" pex and stapled them to the poly before the concrete was poured.
Walls are 2x6 with 1/2" plywood and 1" pink poly and tyvek on the outside of that. Windows are low-e thermo pane & large door is r-19. Walls have dense-pack blown in insulation with 1/2" drywall & steel siding for the bottom 3' of the wall. Ceiling has r-45 blown in fiberglass. I have white steel siding in the inside of the ceiling ( don't like to finish drywall overhead). Outside has vinyl and steel siding.
Heat is by a Takagi on demand modulating hater heater with a 20% antifreeze mix. Natural gas.
I love it so far, has taken me 16 months to build it but it seems to have come out well.
 

Attachments

  • 1Garage .jpg
    1Garage .jpg
    149.6 KB · Views: 79
  • 2Garage.jpg
    2Garage.jpg
    152 KB · Views: 74
  • 3 Garage.jpg
    3 Garage.jpg
    109.8 KB · Views: 74
  • 4 Garage.jpg
    4 Garage.jpg
    143.2 KB · Views: 75
  • 5 Garage.jpg
    5 Garage.jpg
    69.7 KB · Views: 84
  • 6 Garage.jpg
    6 Garage.jpg
    70.6 KB · Views: 75
To avoid these ads, REGISTER NOW!
OP
L

Latitude42

Member
Joined
Jan 16, 2019
Messages
22
Location
S. Wis
Inside and heat.
 

Attachments

  • interior2.jpg
    interior2.jpg
    100.1 KB · Views: 151
  • interior 1.jpg
    interior 1.jpg
    82.9 KB · Views: 164
  • heater .jpg
    heater .jpg
    56.5 KB · Views: 144
Last edited:
OP
L

Latitude42

Member
Joined
Jan 16, 2019
Messages
22
Location
S. Wis
Here is a work bench I made out of scraps... & one of the 4 rolling storage carts I'll be making for tools & stuff that will go under the bench.
 

Attachments

  • bench 1.jpg
    bench 1.jpg
    116.9 KB · Views: 80
  • bench 2.jpg
    bench 2.jpg
    99.9 KB · Views: 82
  • tools 1.jpg
    tools 1.jpg
    99.4 KB · Views: 84
  • tools 2.jpg
    tools 2.jpg
    91.7 KB · Views: 89
  • tools.jpg
    tools.jpg
    94.3 KB · Views: 75
To avoid these ads, REGISTER NOW!

el monte slim

Well-known member
Joined
Apr 4, 2018
Messages
243
Location
Midwest USA
Color me two shades of gray and one shade of white with envy. But seriously, I really like your implementation of the building materials and color schemes inside and out. I also really like the under-bench rolling tool/storage cart idea. There's no doubt it's going to be a great all-season place to get things done. Kudos to you!
 
To avoid these ads, REGISTER NOW!
Top Bottom