Intermediate that will not cost an fortune

[betcd]

I am looking for a intermediate tool box for 26in tool box that is the whole length and width of a 26in bottom box that will not cost my fortune. I would like to stay under 150 dollars. The only boxes I am finding is are ones that go only halfway in length of the bottom box


Sent from my iPad using Tapatalk

 

[T45]

The only boxes I am finding is are ones that go only halfway in length of the bottom box

26in/2=13in

But I've never seen a 13 inch wide intermediate box

...or do you mean front-back depth? or 1/2 height?

 

[speed bump]

Waterloo PIN-263 is a full 18 in depth. I don't know I these guys are any good but they have it for sale for $150.

http://www.tooldiscounter.com/ItemD...WATPIN-263BK&gclid=CLme_duCjdECFQS5wAodTRQPWw

 

[gdocktor3]

tooldiscounter.com is very reputable. I've purchased from them many times.

 

[Packard V8]

Is color and condition important, or just storage? Intermediate boxes are not common, but over the years, I've picked up a brown wrinkle Kennedy 5150B which is a sturdy box, a red Lumidor which is OK and an older red Snap-on.

Watch craigslist and don't be afraid to ask a seller to separate.

jack vines

 

[T45]

This is a $70 from sears, I guess the issue in part is what your bottom chest is? Its full width -- 26.5 x 16 inches -- but may not be 100% depth in you have an 18 inch depth. but maybe you can look at this for some comparisons.

There is probably a cheap-out factor in this design (as its 52 sq inches less space)per shelf, but one could aslo theorize the shelf may be handy and it may be less tippy...I dunno depends on how well its done

http://www.sears.com/craftsman-26-in-2-drawer-heavy-duty-ball/p-00937717000P

Dimensions and Capacity:

Capacity cu. in.: 1896
Width (in.): 26.5
Depth (in.): 16
Height (in.): 10.25
Drawer Weight Capacity (lbs.):75
Width Range: 26 to 32 in.