Is the S80 a replacement for the S936?

[cnyeco1]

I sure this topic is on here and bled to death, and I could search all day for one, but who has time?

I just searched Snap On's web site for S936 and it brings up a S80.

So I assume the the S936 is discontinued and the S80 is the "new" model?
And the S936 was a 36 tooth and the S80 is an 80 tooth?

Is that the only difference?

Thanks in advance guys.

 

[Merkava_4]

so i assume the the s936 is discontinued and the s80 is the "new" model?

and the s936 was a 36 tooth and the s80 is an 80 tooth?

...................................... Y e s

 

[Mr.Nutcase]

Try F936......
opps..........

 

[Fedwrench]

Try F936......

Why?
F936 was a 36 tooth 3/8 drive ratchet. The S letter Designation is for 1/2 inch drive.

If you really want a S936, there are many floating around on Ebay and in dealer's trucks.

 

[Mike83]

I just sent Snap-On my S936 with peeling chrome on the handle. I wonder if I will get an S80 in return. Doesn't matter to me much, fine tooth action isn't often necessary with 1/2" drive.

 

[Merkava_4]

If you really want a S936, there are many floating around on Ebay

Yeah and don't bother bidding unless you bid $100.

 

[Mike83]

Yeah and don't bother bidding unless you bid $100.

Prices can get really high on those. I snatched mine for $50 shipped a few weeks ago Engravings, chipped chrome and all! But now I should be getting a brand new one from Snap-On.

 

[wrenchr]

I just sent Snap-On my S936 with peeling chrome on the handle. I wonder if I will get an S80 in return. Doesn't matter to me much, fine tooth action isn't often necessary with 1/2" drive.

S80 for sure in return!!

 

[Mr.Nutcase]

S936FOD
http://buy1.snapon.com/catalog/item...group_ID=12918&store=snapon-store&dir=catalog

 

[audiophile249]

I just snagged a s936 off of eBay for 40.00 bucks. It has peeling chrome on the bottom of the handle and that is it. No engravings or other markings. Will snap on warranty the chrome and if so will yet replace it with the s936 or the s80.

 

[chadster1]

I just snagged a s936 off of eBay for 40.00 bucks. It has peeling chrome on the bottom of the handle and Thats is it. No engavibgs or other markings. Will snap on warranty the chrome and of so will yet replace it with the s936 or the s80.

Peeling chrome is a warranty issue and yes, you will get an S80 in return since the S936 is no longer produced.

 

[Seanbev24]

Doesn't matter to me much, fine tooth action isn't often necessary with 1/2" drive.

You say that now, just wait til that S80 shows up. 1/2" drive dual 80's are awesome, especially with the longer handles.

 

[SCscoutguy]

If you want a new 936 36 tooth ratchet you can buy one of the new Williams ratchets which is the exact same 936 snap on ratchet guts in a new Williams handle.
http://www.powertool-box.com/product.php?productid=18871&cat=752&page=1