To avoid these ads, REGISTER NOW!

I've HAD IT with Creepers!

kythri

Well-known member
Joined
Jan 3, 2007
Messages
6,330
Location
Lebanon, OR
How much flex/give is there in the Bone creepers?

I bought the HF one, and my fatbody causes it to flex and drag on the ground.

Was thinking about the Bone, if it's got less give in it.
 
To avoid these ads, REGISTER NOW!

aaronrkelly

Well-known member
Joined
Feb 25, 2014
Messages
419
Location
southern Iowa
I bought "The Bone" a couple years ago......after flat destroying every creeper Ive come across.....all my life. Lots of these creepers wouldnt last 2 uses.

Im 6ft4in and weight 350 lbs......lost 100lbs in the last 4 months so Im a svelte 250 now...lol.

The Bone is holding up great and Ive got NO doubt it will last for a long time to come.

At 350.....I could feel "some" flex when I was getting on and off it.....but it never gave enough to even come close to touching the ground.

At 250 it doesnt even care Im on it.

......best money I ever spent.....and PROUDLY MADE IN THE USA.

http://www.bonecreeper.com/creepers.html

I have the Bone-ster with the 400lb capacity - its a beast.
 

gungatim

Well-known member
Joined
Jan 8, 2013
Messages
8,101
Location
west mich
All I can say is I can't stand creepers. never use them. have several, some gifts, they all end up at the garage sale. before my lift, I just kept sheets of corrugated to lay on...just always found them uncomfortable...
 

RLYoung

Well-known member
Joined
Jan 16, 2011
Messages
147
Location
Arizona
How much flex/give is there in the Bone creepers?

I bought the HF one, and my fatbody causes it to flex and drag on the ground.

Was thinking about the Bone, if it's got less give in it.

Minimal, at 260 on a good day :Homer:

I have the HF one at home, and it's PURE garbage compared to the Bone.
 

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
50,903
Location
Northern Central Ohio
Another Bone creeper owner here. I'm happy with mine and wouldn't go back to a regular creeper.

Static, I've had that issue before but not lately. When I first got the Bone, I considered screwing a small chain (something that you would use to hang lights up) and letting it drag to see if it would disipate the energy charge.
 

countryroad82

Well-known member
Joined
Mar 18, 2011
Messages
3,447
Location
Kentucky

Attachments

  • image.jpg
    image.jpg
    144.2 KB · Views: 91

bobdell

Active member
Joined
Feb 7, 2015
Messages
29
Location
Central Florida
I've had this one for about 12 years, got it from Sam's Club.

It gets the job done but has been harder to control since I put the skateboard wheels on it.

2r4imts.jpg
 

ttpete

Well-known member
Joined
Mar 8, 2011
Messages
6,737
Location
Dearborn, MI
I have an old Geiger creeper. Best one I ever owned. Made of hardwood with steel corners that carry the wheels. It's pretty much indestructible. If you ever see one for sale, grab it. Mine cost $5.
 

Jon.R

Well-known member
Joined
Sep 10, 2013
Messages
103
Location
Ontario Canada
I'll give you a vote for the bone creeper. I have the snap on heavy duty creeper but the other four mechanics I work with all have the bones creeper and they are almost 6-8 years old and are still going strong . My snap on is only 2 years old and I don't think it's going last the amount of time the bones will. I'm not hating on the snap on and will prob buy another when I need a new one again.
 
OP
M

maxpower_hd

Well-known member
Joined
Apr 17, 2015
Messages
2,230
Location
Massachusetts
Well I finally have an update and a decision. Thanks for all the input. After trying my buddy's plastic Jeepers Creeper that is the one I went with. I also found a blue one on sale for some reason. But I got it the other day and started using it this week and so far so good. No complaints yet. It rolls really nice, doesn't run me over, it's light and easy to clean. No swearing, smashing, yelling, bruising or ripping.

Thanks again guys.
 

Ruger_556

Well-known member
Joined
Dec 8, 2013
Messages
4,005
Well I finally have an update and a decision. Thanks for all the input. After trying my buddy's plastic Jeepers Creeper that is the one I went with. I also found a blue one on sale for some reason. But I got it the other day and started using it this week and so far so good. No complaints yet. It rolls really nice, doesn't run me over, it's light and easy to clean. No swearing, smashing, yelling, bruising or ripping.

Thanks again guys.

That's what I have, awesome creeper. After a few weeks the casters start "talking" a bit... Couple drops of gear oil in each one and they'll shut up, I think it's been a year since I did it and still quiet and smooth.
 

BoostAddiction

Well-known member
Joined
Jan 23, 2006
Messages
885
Location
Western North Carolina
http://www.kreepster.com/index.html
and never have another issue.. If you are on it all day I would get this guy... I wouldn't mess with anything else, especially under equipment, you have plenty of room, the one is lower but I don't like how if you sit up a bit and are heavy the plastic can hit the ground and stop you from moving...

Kreepster is a race car..


I have these (the creeper and the chair) and they are great. I tossed the other ones I had once I started using the Kreepster.
 

FullRaceMerc

Well-known member
Joined
Jan 9, 2015
Messages
3,845
Location
SoCal (SGV)
... It rolls well but eats the right side of every t-shirt I own...

...and also eats shirts. That one got thrown, smashed and is heading to the dumpster.

...not only eats shirts but skin too...

Reminds me of the 70s. When girls thought guys with long hair were cool, & guys who liked spending time with girls wore their hair long & still worked on their own cars. Not much in the world is more painful than running over your own hair with a creeper wheel. And of course with a creeper wheel there is no rolling off without ripping out more. Mine was never long enough for a ponytail, but sure was long enough to find its way under a wheel. You know why those early hot rodders wore flat tops?

Congrats on finding one that works. I keep trying them from time to time, but usually crawl on cheap moving blankets that can be tossed if they get soaked with gear oil. And they work off road too.
 

Kmaysob

Well-known member
Joined
May 30, 2015
Messages
57
Location
Mesa Az
I have two of these and love them. I got an orange one close to 10 years ago and bought a blue one 2 years ago for my son. I can replace the headpad for around $10 whenever I tear it, and the wheels are lifetime warranty iirc. Never had to use it.
 

Attachments

  • matcocreeper.jpg
    matcocreeper.jpg
    11.9 KB · Views: 49
To avoid these ads, REGISTER NOW!

MoparTrucks

Well-known member
Joined
Aug 21, 2009
Messages
3,218
Location
Ozarks of Missouri
I recently got my Jeepers Creepers from Tooltopia for something like $65 delivered and its been great. I have used it virtually every day working on one of my trucks and it holds my svelte 225 pounds with no problem.

I am also a cardboard type and use shipping boxes frequently for oil changes, trans work etc but yesterday trying to disconnect a wiring harness and removing a rear bumper from a 1991 D-150 I am getting ready to paint having a decent creeper was sweet.
 

Sirnick

Active member
Joined
Feb 22, 2010
Messages
40
Location
Northwest Ohio
I have 2 creepers, a cheap Craftsman from 20 years ago and a Traxion King Crawler with adjustable back rest. My Craftsman gets used the most for quick jobs like oil changes and yes, it eats shirts.:mad: My King Crawler is more for time consuming jobs like brake hard line replacement as it is way more comfortable and rolls smooth over cracks and lead cords. With that said, you do have to jack the vehicle to the moon to fit and the crawler rolls so good it could use the braking mechanism like their other model has. Oh, and as of this post I have yet to get my shirt stuck in a wheel.:thumbup:

spin_prod_1191416312


1-210_1_1024x1024.jpg


Bottom line- lying on your back under a vehicle just plain ***** no matter what creeper you have!:beer:
 
OP
M

maxpower_hd

Well-known member
Joined
Apr 17, 2015
Messages
2,230
Location
Massachusetts
I have two of these and love them. I got an orange one close to 10 years ago and bought a blue one 2 years ago for my son. I can replace the headpad for around $10 whenever I tear it, and the wheels are lifetime warranty iirc. Never had to use it.

The Jeepers Creepers one looks suspiciously identical to the Mac one. I wonder if they are the same creeper with different names on them.

I've been using it for a bit now and am still happy with it. Although all creepers do ****, this one ***** far less. I liked it enough to make a hanger for it to hang off the back of my box. The other ones just got tossed aside because there was no love for them. This one at least deserves its own spot.

I do have to oil the wheels to keep them quite every once in a while but that's no big deal.
 

stihlntime

Well-known member
Joined
Jun 2, 2015
Messages
603
Location
SW Missouri Ozarks
Stay away from the HF creeper unless you are south of 165 lbs. As an occasional creeper user I've tore two of up in no time on a smooth as glass shop floor. They flex, wheels collapse just fail period. HF sells a few decent pieces of equipment like impact sockets, five drawer cart etc. but not the creeper. Based on the opinions here will prolly by a bone.
 

LordPsychon

Well-known member
Joined
Mar 25, 2015
Messages
514
Location
In your basement...seriously, go look now!
Stay away from the HF creeper unless you are south of 165 lbs. As an occasional creeper user I've tore two of up in no time on a smooth as glass shop floor. They flex, wheels collapse just fail period. HF sells a few decent pieces of equipment like impact sockets, five drawer cart etc. but not the creeper. Based on the opinions here will prolly by a bone.

I agree with everything you've said but the part I bolded frankly I don't get?:dunno:

Anyone ever try to make their own creeper? It seems to me that this could be a nice little project for a welder and a mechanic.
 

GDPossehl

Well-known member
Joined
Sep 23, 2014
Messages
450
Location
Atlanta, GA
From the use I've gotten out of mine, I think it's pretty comfortable. I'm actually pretty impressed considering it's a duralast product from autozone that I put no thought into purchasing before a project. I only use it every couple months though, so not nearly every day. But for $50 it's not a bad piece at all. Never had a problem with shirts snagging.

It's similar to this.

ca7d3314-c34b-4c56-9b7f-f28f52d717d8_300.jpg


I'm about 175lbs and 5'11 and it fits me well enough.
 

dawg69

Banned
Joined
May 2, 2014
Messages
89
Location
Iowa
I have 2 of the plastic Jeepers Creepers and a Bone Rough Rider. Currently, I grab the Jeepers Creeper every time mainly due to the fact that it is light, small, and handy compared to the Bone.

I bought the Bone when I was working in a shop that had rough dirty floors and occasional work on a gravel lot. I also did a lot of work at my old house on a gravel driveway as well. It shines over all others in this arena. I've also used it several times as a makeshift mover's dolly and it has held up great. It is quite heavy and a bit bulkier than others including the JC which is why it doesn't get much use in my current garage which has a smooth floor.

Bottom line, if you have uneven or rough surfaces, go with the Bone. If you have smoother floors go with the Jeepers Creeper. Both are comfortable and durable.
 

Badasssapper67

Well-known member
Joined
Sep 24, 2012
Messages
322
Location
Molalla Oregon
This may have been discussed before but I did not find anything with the search option so maybe some of you can give me feedback and help me decide what creeper I will buy.

I've come the realization that I may very well drop $140 or more on a creeper only to smash it into pieces when I get so aggravated with it that my brain explodes! Yes it has happened already and almost did again last night.

I started out with one of the two creepers I already owned. It's a red vinyl covered, metal framed, 6 wheel creeper made by Jeepers Creepers. It rolls well but eats the right side of every t-shirt I own and has had support issues with the frame. I've welded and re-screwed bit it still needs work.

Then I went to an older Blue Max creeper of similar but stronger construction. I had to replace wheels only to have others de-laminate shortly after. It rolls in the EXACT opposite direction I want to go in and also eats shirts. That one got thrown, smashed and is heading to the dumpster.

I then went to the classic Snap On creeper which not only eats shirts but skin too. Although it does roll pretty well when not removing flesh or cloth from my sweating, high blood pressure, anxiety ridden body.

I am in dire need to buy a new one but have become rather scared that I may have a heart attack if I buy one that will just end up pushing me over the edge into complete mental breakdown. And believe me I am already getting close.

Anyone have something that they use EVERY day that they actually like?

Thanks for the input. I look forward to reading your suggestions as well as your tails of woe for ones NOT to buy.

For clarity sake, I work in a garage with a pretty dirty concrete floor so it needs to roll well on somewhat rough surfaces. I occasionally need to use it on pavement. I use it all the time, almost daily so it needs to be durable. I weight just under 200 lbs. And I think I have determined that any open wheel style is out of the question.

HAHAHA!!! We must be related! My favorite creeper trick is getting under a vehicle realizing it's not a metric it's an sae and then having all my change fall out of my pocket and under the wheels so I cant scoot out because my legs are under the car and I cant bend my knees high enough to get leverage to scoot over the change.
That's when me and the creeper do the dance of death and I realized I just destroyed a hundred and fifty bucks.
Someone needs to invent a creeper that works like a reverse vacuum cleaner and just hovers over the ground, be it gravel, extension cords or what ever.
 

defektes

Well-known member
Joined
Nov 24, 2014
Messages
547
Location
Arizona
Reminds me of the 70s. When girls thought guys with long hair were cool, & guys who liked spending time with girls wore their hair long & still worked on their own cars. Not much in the world is more painful than running over your own hair with a creeper wheel. And of course with a creeper wheel there is no rolling off without ripping out more. Mine was never long enough for a ponytail, but sure was long enough to find its way under a wheel. You know why those early hot rodders wore flat tops?

Congrats on finding one that works. I keep trying them from time to time, but usually crawl on cheap moving blankets that can be tossed if they get soaked with gear oil. And they work off road too.

My girl was a service writer for a mom and pop, and she helped one of the mechanics and his Snap on creeper did a number to her hair LOL reminds me of that.
 

TTLLOGIC

Well-known member
Joined
Nov 14, 2014
Messages
87
Location
Amherst, OH
I have the Snap-on JCW70AR got it on special and love it. I'm a big guy and it hasn't let me down, nice size wheels that roll smooth on a dirty floor.

JCW70AR.jpg
 

toddacimer

Well-known member
Joined
Sep 23, 2012
Messages
757
Location
Oshkosh, Wi
I have the Snap-on JCW70AR got it on special and love it. I'm a big guy and it hasn't let me down, nice size wheels that roll smooth on a dirty floor.

JCW70AR.jpg

I have the same one and love it but it is a bit tall for going under pickups and such without putting them on jack stands
 

Dan99

Member
Joined
Dec 8, 2021
Messages
18
Location
Minnisota St Paul
I am going to modify mine and you can let me know what you think about it no more pinching!!
 

Attachments

  • Creeper-Mod.png
    Creeper-Mod.png
    2.9 MB · Views: 62

FMB4

Well-known member
Joined
Jan 19, 2017
Messages
2,926
Old thread, but cardboard works better than any creeper I've used.
 
To avoid these ads, REGISTER NOW!
Top Bottom