bad *** post vise 5" jaws more than likely pre- 1900s forged Iron 70 plus pounds =100 bucks unless you make me believe you will love her and beat the hell out of her.
wood drill and set of auger bits... 15 bucks
assorted wrenches (these are all old some have names some dont) 15 bucks
bonney= Zenel h-12 9/32-1/4
3021 5/16 - 13/32
z-2820 5/8
bonaloy 2825 5/16-38
1033-c 5/8 -3/4
1020 1/4 -5/16 X2
e-24 3/4-13/16
sockets kent moore ld20 bonney 5/8
5/16
tu-14 1/2 knuckle
bonney 20 bucks for the lot+
mac=cl-22 11/16
cl-24 3/4
cl28 28 these 3 have om
b-105 1 1/8-1 1 1/4 all sabina, oh
15 bucks for the lot+
kent-moore.... k-453....j-1032....216? 5 bucks+
Blue point bit **** 10 bucks+ sold
snap on=
1/4 fs-081
11/16-fs221
3/4 fs241
fs141
fs101
not guar f-21
no.86 1/2 knuckle
stm deepwell 7/16
f-5-c t-handle date code E
30 bucks +
s-k=
3/8-1/4 adapter
1/4, 3/16, 1/4 drive
3/4,11/16,5/8,9/16,1/2,7/16,3/8 3/8 drive
15 bucks if ya want the box it will just cost ya shipping (no box small flat rate, box large flat rate)
blackhawk=
et-1332 puller
et-1007 puller
t-60 ext
35332 1''
351123/8
35134 1 1/16
35220 5/8
1" knurled
40618 9/16
30018 9/16
hw1516 15/16-1/2
bw1161 7/16
5/8 bfc-20
9/16 bfc-18
7/16 bfc-14
40 bucks+
Barcolo=
7/16
?
3/4
3/8
1/2-9-16
11/16-19/32
1/2-9/16
7/8- 13/16
15 bucks
I will be posting more in the near future, plomb,proto,,din,p&c, and so on so keep checking back
wood drill and set of auger bits... 15 bucks
assorted wrenches (these are all old some have names some dont) 15 bucks
bonney= Zenel h-12 9/32-1/4
3021 5/16 - 13/32
z-2820 5/8
bonaloy 2825 5/16-38
1033-c 5/8 -3/4
1020 1/4 -5/16 X2
e-24 3/4-13/16
sockets kent moore ld20 bonney 5/8
5/16
tu-14 1/2 knuckle
bonney 20 bucks for the lot+
mac=cl-22 11/16
cl-24 3/4
cl28 28 these 3 have om
b-105 1 1/8-1 1 1/4 all sabina, oh
15 bucks for the lot+
kent-moore.... k-453....j-1032....216? 5 bucks+
Blue point bit **** 10 bucks+ sold
snap on=
1/4 fs-081
11/16-fs221
3/4 fs241
fs141
fs101
not guar f-21
no.86 1/2 knuckle
stm deepwell 7/16
f-5-c t-handle date code E
30 bucks +
s-k=
3/8-1/4 adapter
1/4, 3/16, 1/4 drive
3/4,11/16,5/8,9/16,1/2,7/16,3/8 3/8 drive
15 bucks if ya want the box it will just cost ya shipping (no box small flat rate, box large flat rate)
blackhawk=
et-1332 puller
et-1007 puller
t-60 ext
35332 1''
351123/8
35134 1 1/16
35220 5/8
1" knurled
40618 9/16
30018 9/16
hw1516 15/16-1/2
bw1161 7/16
5/8 bfc-20
9/16 bfc-18
7/16 bfc-14
40 bucks+
Barcolo=
7/16
?
3/4
3/8
1/2-9-16
11/16-19/32
1/2-9/16
7/8- 13/16
15 bucks
I will be posting more in the near future, plomb,proto,,din,p&c, and so on so keep checking back
Attachments
Last edited:
