just did mine

[mel80]

i am a lurker..and i tot its time to share my pics...

this weekend.. s.... cleared out the garage on Friday evening and stacked stuff outside as its not going to rain at all for the next 3-4 days ..... early morning Sat... pressure washed the garage and etch the concrete floor to prep it for the polymer coat.. etching was done using muriatic acid.. i did not use the etching powder that came with the Rustoleum kit

floor all dried and cleanly etched..had a fan blowing for 24hrs in the garage directly on the floor

the boots belong to SO is amazing... lol

after 2 hrs... and its all done... the whole garage
https://scontent-b-lga.**.fbcdn.net/hphotos-xpf1/l/t1.0-9/10426697_10152312461739164_1225493213308215817_n.jpg

https://scontent-b-lga.**.fbcdn.net/hphotos-xpf1/t1.0-9/10385547_10152312461754164_5014942297561727007_n.jpg

https://scontent-b-lga.**.fbcdn.net/hphotos-xpf1/v/t1.0-9/10462854_593939654052846_4139075142116992277_n.jpg?oh=02d039a4c8498be1917a7bb766393a4d&oe=540C9CA3

 

[mel80]

added the clear coat last evening.. and it dried this morning...

but still would let the underlaying layer to cure fully ... waiting at least 14 days... in this hot summer month.. before i move anything back into the garage.. the neighbors will have to live with my stuff covered in blue tarp.. .. for the next 2 weeks... i have a H2 which i normally park indoors.. but since its nearly 8600lbs... i am wondering if 14 days cure is enough..

coated the wooden steps to the house..

 

[OhCookie]

That looks really good. Love the shine too.

 

[mel80]

yes.. it does fit in a std garage... this house was built in 2012..

https://scontent-b-lga.**.fbcdn.net/hphotos-frc3/t1.0-9/1173719_10151662516509164_975257950_n.jpg

 

[mel80]

That looks really good. Love the shine too.

the shine on the wooden steps??.. lol.. .. i had some left over on my roller so i used it on the wooden steps...

 

[Shea]

i am wondering if 14 days cure is enough..

7 days for epoxy to fully cure.

 

[mel80]

ok then .. i will do a check pt this Sunday..

 

[Wuaname]

Looks nice

 

[ajohno]

Looks great.

 

[ddawg16]

Well....your not a virgin now.....

Looks good....

 

[mel80]

Thanks guys... I am just a novice.. learnt from reading here nightly ...

 

[600SL]

Looks very nice.

 

[emei]

Looks good.

 

[mel80]

some close up of my tool cabinets.. .. which i set up last night..

at least the TASKFORCE unit fitted the top of the CRAFTSMAN