Hey guys Ive got a KRL7023 snap on box, If one of the Snap on dealers could chime in that would be great, Im looking to add a side locker and a friend has KRL712 hes willing to part with, it looks like its a bit short will this work? Also could I get a closing work station to work with this?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
KRL7023 with a KRL 712 locker?
- Thread starter Blwnsln
- Start date
mrshaun
Well-known member
you can get the work station. best to have a wood or stainless top on the box
the side cab will be short in depth, but height i am not sure of.
the side cab will be short in depth, but height i am not sure of.
chadster1
Well-known member
you can get the work station. best to have a wood or stainless top on the box
the side cab will be short in depth, but height i am not sure of.
I think the height will work. Isnt a 7023 as tall as a 722?
chadster1
Well-known member
Depth is short. A 7023 is 29" deep, the 712 locker is for a 24" deep box.
mrshaun
Well-known member
you would need to look at the specs in the book and measure from the hanger to the bottom of each locker and each box to ensure height.