lawn mower help

[1bigpoppa]

I have the Lawn boy Gold series and have worn the wheels nearly off it. I purchased some rear (drive) wheels and they didn't have the drive sprocket on the wheel. Question- can I remove the sprockets from the old wheels and place them on the new ones. glad to be aboard and thanks.

 

[Zeeman]

If you can post some pictures it sure would help us see what you're dealing with. Don't use photobuckit!

 

[JHuston]

If you can post some pictures it sure would help us see what you're dealing with. Don't use photobuckit!

Short answer, yes. The gear should be retained by three drive screws;in the past, I've warmed them up( a heat gun will work, just do it outside, because the plastic fumes are nasty), pulled them with end cutters and driven them into the new wheel.
-James Huston

 

[1bigpoppa]

Thanks for the help