To avoid these ads, REGISTER NOW!

LED questions...

ElvisBruski

New member
Joined
Aug 25, 2012
Messages
2
Ok... I have a 1993 Dodge Grand Caravan Sport... yes... i know... its old... hahaha... but anyway... i bought these LED brake/turning signal lights.... well... i was sooooo excited to install them... i did so... and they blink fast... like... really fast.... but when i put the hazard lights on.. they blink fine, but only when the car is on... now... ive dealt with this for over 2 years now... and i just found this forum and I wanted to know if you all cold help me figure out how to make them blink normally.... thank you soo much!!

BTW... i LOVE this forum!!!












______________________________
LED Fluorescent
led ceiling lights
led strip
 
Last edited:
To avoid these ads, REGISTER NOW!

Rye425

Well-known member
Joined
Feb 28, 2011
Messages
276
Location
CT
Pick up a heavy duty signal relay. About 5 bucks at an Auto parts store. Seems funny as you'd think LED should be using less power but fixed it for me a year ago.
 
To avoid these ads, REGISTER NOW!

Gary S

Well-known member
Joined
Dec 27, 2008
Messages
2,972
Location
Bismarck, ND
You likely have a mechanical flasher that is load dependent. The LEDs put less load on the flasher so it can't function correctly.
Today you can get electronic replacements that are time dependent, not load dependent. Check your local auto parts stores and see if they have an electronic replacement for you.
 

theoldwizard1

Well-known member
Joined
Feb 22, 2011
Messages
43,216
Location
SE MI
You likely have a mechanical flasher that is load dependent. The LEDs put less load on the flasher so it can't function correctly.

Today you can get electronic replacements that are time dependent, not load dependent. Check your local auto parts stores and see if they have an electronic replacement for you.

+2 !!
 
To avoid these ads, REGISTER NOW!
Top Bottom