Lets see your Tool Carts/Service Carts

[cotjocky]

Somebody likes green!

 

[nickjj]

That lot must have cost a fortune!

 

[SC-AW11]

Who me? Naah haha.

Definitely a pretty penny. Worth more than my car a few times over lol

 

[Mxjr12]

What is the big set of extensions?

 

[SC-AW11]

http://store.snapon.com/Extension-F...Friction-Ball-8-pcs-1-1-2-to-24--P631391.aspx

 

[CaseyJoes.]

Here is my KRSC101PCM at the railroad I work at with an KR295PCM on the side. I mounted it using existing holes in the cart itself and nutserts, although I did have to drill new holes in the KR295PCM.

 

[ayej324]

Would anyone know the exact name of the part that keeps the lid open is called. I made a note on the picture of what exactly i'm talking about.

Reason im asking is because I would like to add that to my tool cart just to keep it open. Thanks

 

[bodyguy16]

Hey thats my cart ! Lol they are lid supports I actually added those on. Any hardware store should carry them

 

[Tech89]

This is my service cart. Picked it up a few weeks ago at fleet and farm.

Tool layout has changed a little since these pictures, but still the same basic setup.

-Pat

sent from somewhere in Minnesota...

 

[bodyguy16]

This is my service cart. Picked it up a few weeks ago at fleet and farm.

Tool layout has changed a little since these pictures, but still the same basic setup.

-Pat

sent from somewhere in Minnesota...

I like the work surfaces, nice find!

 

[Tech89]

I like it too. Works well.

-Pat

sent from somewhere in Minnesota...

 

[DieselFxr]

Here mine, most of the time I can work out of this cart without going to my main box for additional tools.

 

[BlksnshN]

Picked up this KRSC101 about two weeks ago. Love the work top.

https://scontent-a-ord.**.fbcdn.net/hphotos-ash3/t1.0-9/10172762_803718519639904_5737474732378360582_n.jpg

https://scontent-a-ord.**.fbcdn.net/hphotos-prn1/t1.0-9/10268583_803718586306564_7564242865482091968_n.jpg

https://scontent-a-ord.**.fbcdn.net/hphotos-prn2/t1.0-9/r180/10155130_803718639639892_605003940088764435_n.jpg

 

[918rhino]

Here's my cart, not much but it works.

 

[Mr.Nutcase]

My tool cart
Last year. After getting the box.
I spend a few hours fixing the mess.
Unorganized mess
this year is more organized.
Pictures in few days. Have add sockets rails and wrench holders.
Since the box is so big I bought a smaller cart that I can move around.
Moving the snap on box is a pain.

 

[JDSV]

Who makes the roto head ratchets? They look like MACs but without the grip.

Picked up this KRSC101 about two weeks ago. Love the work top.

https://scontent-a-ord.**.fbcdn.net/hphotos-prn1/t1.0-9/10268583_803718586306564_7564242865482091968_n.jpg

 

[75R1]

Here's my little cart. I needed something with a smaller footprint than my old cart given the limited space I'm working in. A Matco MB505 cabinet and some angle iron cobbled together was all I needed. Just enough room for the basics.

 

[ihateminimumwage]

Here's my little cart. I needed something with a smaller footprint than my old cart given the limited space I'm working in. A Matco MB505 cabinet and some angle iron cobbled together was all I needed. Just enough room for the basics.

Now that is awesome! Great job.

 

[75R1]

Now that is awesome! Great job.

Thanks! I think I'll make another one for the welding supplies, it's been quite handy.

 

[NorCalWrenchin]

Hi everyone, been drooling over this thread for a long time! All of the carts so far are awesome, with some great ideas! Had to sign up and as my first post figured I'd toss a few pictures of my old beat down Blue-Point cart I use at work. It needs to go away in favor of an electric orange KRSC326 lol. Sorry for the crappy pics.

 

[bodyguy16]

Hi everyone, been drooling over this thread for a long time! All of the carts so far are awesome, with some great ideas! Had to sign up and as my first post figured I'd toss a few pictures of my old beat down Blue-Point cart I use at work. It needs to go away in favor of an electric orange KRSC326 lol. Sorry for the crappy pics.

Thats a nice cart, I wish mine had a deeper top section.

 

[MN4x4]

Question for you guys with carts that have drawers all the way to the floor:

What do you use the bottom couple of drawers for, and do you like those drawers?

I am over 29 years of age (well over ) and find that bending is becoming more and more of a problem for me. I have been looking at carts that have an open area at the bottom, as well as a full-drawer carts. I'm hoping that your input can help me decide?

 

[csargents1546]

MN4X4,
I love my cart with drawers all the way down to the bottom. On my previous cart three drawer with open bottom, found the bottom shelf was a junk collector and did little to aid me in my day to day work. Had to keep a lot of my bulky tools and equiptment in my main box and grab it when needed. Now, if I have used it on any kind of regular basis, it finds a home in my cart. I even have room to keep my rad kit and pressure testers as well as all the different adapters. Purchased the Snap on the krsc43 with in candy apple with truck bed liner material on the split lid. It is back on page 60 of this thread I believe. For kicks, I did not unlock my main box at the start of the day for over a week. Then it was for another tech.

 

[MattPersman]

I have my bjp1, jump box, battery charger, brake caliper tools down in the bottom drawer of my cart.

 

[MN4x4]

MN4X4,
I love my cart with drawers all the way down to the bottom. On my previous cart three drawer with open bottom, found the bottom shelf was a junk collector and did little to aid me in my day to day work. Had to keep a lot of my bulky tools and equiptment in my main box and grab it when needed. Now, if I have used it on any kind of regular basis, it finds a home in my cart. I even have room to keep my rad kit and pressure testers as well as all the different adapters. Purchased the Snap on the krsc43 with in candy apple with truck bed liner material on the split lid. It is back on page 60 of this thread I believe. For kicks, I did not unlock my main box at the start of the day for over a week. Then it was for another tech.

That's a nice looking cart for sure! Makes me want to run out to the shop and reorganize my cart right now...

 

[-Brent-]

My humble cart (trolley as they're called elsewhere). The only thing I've done to it, so far is cleaned it up a bit and put some spare screwdrivers into it. I've got to load it up but before I use it I'll likely being doing an overhaul on my garage so, it will sit in the corner for the next few weeks.

 

[ADSR]

My humble cart (trolley as they're called elsewhere). The only thing I've done to it, so far is cleaned it up a bit and put some spare screwdrivers into it. I've got to load it up but before I use it I'll likely being doing an overhaul on my garage so, it will sit in the corner for the next few weeks.

Well done! Those are beautiful!

 

[Big hooper]

Enjoy all the picture. Hope to have mine up here soon.

 

[BK13]

Does anybody have a pic of a KRSC326 next to a KRSC46? I can stare at specs all day, but seeing one picture makes things a lot more clear how big each one is.

 

[BladeExt]

@NorCalWrenchin. Like that color, blue and black. still have to post pic of my cart after I painted I multi color.

 

[bodyguy16]

@NorCalWrenchin. Like that color, blue and black. still have to post pic of my cart after I painted I multi color.

post that pic! ive always wanted to see a multicolor cart/box!!!!!!

 

[countryroad82]

Here is my KRSC46 I love this thing. I recently switched it to being my full time cart as before I used it for a toolbox and my HF 4 drawer cart as my main. But since I bought my KRL7022 I figured it would use it for it's intended purpose lol. It's kinda empty now to say the least and I'll probably be switching it around again. It's setup for collision/resto work.

Sent from my iPhone using Tapatalk

 

[Major Ramifications]

OK guys, this thread is at the top of this section right now and from the Forum page it says, "Let's see your tool"

 

[ricleh]

I got another cart and rearranged some things with my old ones. These are my most used carts.

 

[upgrading]

Holy Hazet Batman !

Looking good.

 

[Monte]

ricleh the godfather of tools

 

[ClineWrench]

I wasn't planning on posting until I realized that I haven't seen a tool cart like mine since the late 90's. So here she is in all her glory.

 

[ADSR]

I wasn't planning on posting until I realized that I haven't seen a tool cart like mine since the late 90's. So here she is in all her glory.

That's great! I have the same cart without the drawers. Did you add them?

 

[NorCalWrenchin]

I added a cut down Craftsman 26" top box into the bottom tray of my KRBC10. It looks kind of junky but it's functional! Pics coming soon.

 

[jd_1138]

[/URL][/IMG]