Let's see your toolbox.
- Thread starter wythors
- Start date
.outlander800
Well-known member
- Joined
- Dec 16, 2010
- Messages
- 283
I just posted mine to a question in another thread so I'll post it here as well
Snappy z28 Anniversary Box.
I Loves me some Hugger Orange!
Very nice box. Im not much for theme boxes, but that Z28 color is awesome.
Heres my 6S Matco box thats a few years old. Biggest one they make.
View media item 8195
View media item 8198
View media item 8201
View media item 8199
View media item 8200
View media item 8195
View media item 8198
View media item 8201
View media item 8199
View media item 8200
MechanicNamedJohn
Well-known member
- Joined
- Jun 3, 2010
- Messages
- 1,344
You should start your own thread about this project.
les_garten
Banned
I didn't like any of the other Theme boxes either, but this one kinda bit me. I've got where I really dig the ORANGE!
Nice! Very Stealthy!
Yep, +1 on that, this is WAAAY too cool to be buried deep in this thread!
~Johan
anodyne33
Well-known member
Damn.
krogsmash86
Member
just saw this pic is it real?????????????
looks like the new snapon tuv ironhead but with some wicked ideas attached to it
Here are some pics of my toolbox in my tool crib...
Lista goodness
Socket overflow:
Hammer time:
Mac and others
Armstrong and Martin and a few cornwell:
Craftsman Pro:
Full Polish CMAN Pro wrenches:
Ratchets:
Cross force and flex ratchets:
The wall o tools:
Long view of the tool crib - 40' long by 8ft wide:
More walls and 2 1/2 Armstrong combo:
Blackhawk tool board trying to fill up:
A little messy - just the way I like it:
Hope you enjoy - I took a lot of ideas off this forum so thanks.
Lista goodness
Socket overflow:
Hammer time:
Mac and others
Armstrong and Martin and a few cornwell:
Craftsman Pro:
Full Polish CMAN Pro wrenches:
Ratchets:
Cross force and flex ratchets:
The wall o tools:
Long view of the tool crib - 40' long by 8ft wide:
More walls and 2 1/2 Armstrong combo:
Blackhawk tool board trying to fill up:
A little messy - just the way I like it:
Hope you enjoy - I took a lot of ideas off this forum so thanks.
Last edited:
craftsmanfann
Member
- Joined
- Feb 25, 2011
- Messages
- 10
blown94conv
Well-known member
That buy the triple and get the hutch free deal had me doing some serious thinking. Good thing I really don't have the room in the garage.
Scuderia-F1
Well-known member
briandrex
Well-known member
Carder69,
That's an awesome setup. I think I would move in there permanently if I had something like that. Only think missing is a pull out drawer to put a bed in! Are you a collector or do you use alot of that stuff? I could see myself collecting it whether I would use it or not.
That's an awesome setup. I think I would move in there permanently if I had something like that. Only think missing is a pull out drawer to put a bed in! Are you a collector or do you use alot of that stuff? I could see myself collecting it whether I would use it or not.
Case IH
Well-known member
Here are some pics of my toolbox in my tool crib...
Lista goodness
Socket overflow:
Hammer time:
Mac and others
Armstrong and Martin and a few cornwell:
Craftsman Pro:
Full Polish CMAN Pro wrenches:
Ratchets:
Cross force and flex ratchets:
The wall o tools:
Long view of the tool crib - 40' long by 8ft wide:
More walls and 2 1/2 Armstrong combo:
Blackhawk tool board trying to fill up:
A little messy - just the way I like it:
Hope you enjoy - I took a lot of ideas off this forum so thanks.
WOAHH that is like a walk in tool box!!!! I love it
Scuderia-F1
Well-known member
@ Carder69
That´s an impressive "toolroom"!
That´s an impressive "toolroom"!
dabirdguy
Well-known member
I can't afford the nice new boxes so I have to settle for OLD STUFF, (like me!). I have two Crapsman triplestacks for my hand tools:
A used snap-On and a Kennedy for my lathe and measuring tools:
and I collect SK tool boxes:
And while its not a"Tool box" I also have a hammer tree to store my sheetmetal tools:
Glenn
Glenn
A used snap-On and a Kennedy for my lathe and measuring tools:
and I collect SK tool boxes:
And while its not a"Tool box" I also have a hammer tree to store my sheetmetal tools:
Glenn
Glenn
Last edited:
les_garten
Banned
I can't afford the nice new boxes so I have to settle for OLD STUFF, (like me!). I have two Crapsman triplestacks for my hand tools:
A used snap-On and a Kennedy for my lathe and measuring tools:
Glenn
That Snappy is pretty kewl!
Blue Kennedy?
Didn't know they came in that color?
dabirdguy
Well-known member
Thanks!
It was a mess so I stripped and painted it with what was in the cabinet. It was almost gonna be pink.
It was a mess so I stripped and painted it with what was in the cabinet. It was almost gonna be pink.
archirelic
Well-known member
New box is here!! and the hutch is on the way.
If I were to ever justify the purchase of a snap-on box, I'd be looking at that color right there!
Quik208
Well-known member
That hammer tree is pretty SWEET!!!
I Am more of a collector because my day job gets in the way. If I had more time I would never leave and work on projects.
I had the concept of a walk in toolbox and I designed it from the ground up. It is inside a 40x60pole barn. Heated and flat screen make it difficult to go back in the house.
Lista toolboxes are very dangerous to the wallet since I hate having empty drawers.
I had the concept of a walk in toolbox and I designed it from the ground up. It is inside a 40x60pole barn. Heated and flat screen make it difficult to go back in the house.
Lista toolboxes are very dangerous to the wallet since I hate having empty drawers.
ihredo4
Well-known member
Yep the Listas are dangerous on the wallet but you cant get a better non-portable box. Not that you can't put wheels under them. Wish I had bought mine earlier.
SpiderGearsMan
Banned
dart360swinger
Member
I remember reading that article a couple months ago. Awesome set up! Congrats on getting into the magazine too.
Scuderia-F1
Well-known member
A couple of bad iPhone pics of my box!
Scuderia-F1
Well-known member
SpiderGearsMan
Banned
not me , I have way more stuff than victor LOL
48James
Well-known member
My little tool boxes I restored.
[/IMG]
[/IMG]
gluckmysock
Well-known member
Ok Guys be gentle, My cell phone camera isnt the greatest.
http://www.garagejournal.com/forum/album.php?albumid=1028
hope this works.
http://www.garagejournal.com/forum/album.php?albumid=1028
hope this works.
colt zantop
Well-known member
nice first post. that box is killer!
Scuderia-F1
Well-known member
^^That Matco is a da*n nice box!Layspeed
Well-known member
Just joined this awesome forum! Here's my toolbox...too bad it's in California and I'm working in British Columbia! =( If I can get permanent residence, I'll truck it up here...I miss working out of it.
Deafautotech
Well-known member
That is total difference!!! I did look close of your pictures and victor's. You have way overstuff than his as he have all tools lay out to make it look nice..
Just joined this awesome forum! Here's my toolbox...too bad it's in California and I'm working in British Columbia! =( If I can get permanent residence, I'll truck it up here...I miss working out of it.
Nice Snap On ( Love Stickers)
Congratulations!
V!
Deafautotech
Well-known member
just update the pictures as i had brought a my matco MSC12 to home and bought a menards masterforce 36" bottom full wide box to work today...
i need to contact the masterforce box company to order the extra slides to put on because i had to pull bottom drawer out to use slides to double on top drawer... i has too much on first drawer but that my daily use tools...
i did swap the top two narrow drawers for deep drawer from bottom.. that why it look little odd.. BUT that work for me!!!
i need to contact the masterforce box company to order the extra slides to put on because i had to pull bottom drawer out to use slides to double on top drawer... i has too much on first drawer but that my daily use tools...
i did swap the top two narrow drawers for deep drawer from bottom.. that why it look little odd.. BUT that work for me!!!
Attachments
Kevin54
MEMBER EMERITUS
Keep us updated Andy as to how the Menards box works out for you. I have (3) 41" base boxes, (2) side boxes and (1) 41" top box. I didn't know you could swap the drawers around, but I guess I never looked that close either. I'm anxious to see how they hold up in a work environment. Although I have one of my bases at work it never gets moved around.
Deafautotech
Well-known member
OK i will do update about mine later. i tried to swap the drawers but the three 3"drawers ARE NOT interchange... it is kind disappointed to me BUT when i did fill up the tools on masterforce box from my retired matco MSC12, i am happy that three 3" deep drawers fit and work GREAT! WHEW!!!
i am keep moving it around shop because i has work between Focus to F-550... also it make lot better size to go where i want and i dont worry about open the top slide lids because MSC12 are 35" as closed but when open, it is extend to 72"... so it made more diffcult for me to keep it open all time because other techs will push it close to make a way to walk by or move the cart... so that why i had brought MSC12 home BUT i did asked for add on drawers for mine, matco want 600 dollars. so i went to menards to buy it for only 359 dollars plus damn taxes... so i am happy!
when i brought it to my work, some of techs told me i HAVE a problems of tools and tool storages... i told them i has use all of them EVEN damn you that you use mine!!