Let's see your toolbox.

[Wamsutta]

That's a very bright a cheerful box.

 

[Coloradical]

 

[87FoRunner]

Just got my new us general 2 set up at work

Is that going to be stationary or more of a “roll cart?” Im very intrigued on the idea of slapping a good surface on one and using it as a roll cart at home.

 

[4x4crewcab]

KR1000 x2

 

[GTO]

KR1000 x2

Would love to see the Ford GT and GT500 pictures as well.

 

[Bldmovs]

 

[trpearcy]

Took this pic today. Top drawer of my KRL1033.

 

[C.L S2000]

That's a clean simple set up. Wish I could have my set up exactly like this..

 

[Bldmovs]

Thank you. I try to keep it as functional and simple as possible, given the foot print of my space.

 

[bevs]

Is that going to be stationary or more of a “roll cart?” Im very intrigued on the idea of slapping a good surface on one and using it as a roll cart at home.

It'll mostly be stationary but will move around a bit. It would make a great roll cart at home, with the 22" depth you can fit a lot in the drawers. I've also been considering putting a solid top on it, but I'll see how it works as is for now.

 

[Tweedz55]

Just got a Snap-On roller cab setup for $400.

 

[awill47]

https://www.homedepot.com/p/Husky-8...bo-Matte-Black-3-Piece-HOTC8010BB1S/304589169
thoughts on this box?? i’ve been set on a menards 72” masterforce box. was looking around for shits and giggles, I’ve always wanted a hutch.. and wouldn’t mind a side locker. I could sacrifice the loss of 10” on the box to gain a hutch and side locker


Sent from my iPhone using The Garage Journal mobile app

 

[michelin]

https://www.homedepot.com/p/Husky-8...bo-Matte-Black-3-Piece-HOTC8010BB1S/304589169
thoughts on this box?? i’ve been set on a menards 72” masterforce box. was looking around for shits and giggles, I’ve always wanted a hutch.. and wouldn’t mind a side locker. I could sacrifice the loss of 10” on the box to gain a hutch and side locker


Sent from my iPhone using The Garage Journal mobile app

It looks just as any other decent SO copycat would - all show and no go. Welded castors, really? Cheap manufacturing tricks instead of pressed parts to save money. It’s a no from me...

 

[C2tuck]

....

 

[kb1982]

Those are the 24 inch deep ones probably. The others were 18 inches deep. When the 24 first came out, they were 249 for the first few weeks. I have the 18 inch deep one at work and the 24 in the garage.

Sent from my LML713DL using Tapatalk

 

[C2tuck]

Ahh...that might be what it was. There ok. I bought one for the wife to put her woodworking stuff in and one for my son. I bought the 44 general about 3 years ago and love it. It’s getting full so I may need to add it soon.


Sent from my iPhone using Tapatalk

 

[87FoRunner]

It'll mostly be stationary but will move around a bit. It would make a great roll cart at home, with the 22" depth you can fit a lot in the drawers. I've also been considering putting a solid top on it, but I'll see how it works as is for now.

I would love to see how you have the drawers laid out sometime if you have time.

 

[SF AV Guy]

Three Huskys & seven cabinets, less than 2k invested and it gives me a ton of storage.


Sent from my iPad using The Garage Journal mobile app

 

[SJK2]

Three Huskys & seven cabinets, less than 2k invested and it gives me a ton of storage.


Sent from my iPad using The Garage Journal mobile app

Very nice............

 

[jon.j.shields]

I started with just a basic roller from Harbor Freight and added a countertop from Ikea. But for organizing I am using the Matco Tool Grid. Expensive but I like it because I can reorganize as needed to new tools.


Sent from my iPhone using Tapatalk

 

[protegeV]

That's bordering on TOO organized

 

[scrapdaddy]

I like that wrench organizer.

 

[irisservice]

I started with just a basic roller from Harbor Freight and added a countertop from Ikea. But for organizing I am using the Matco Tool Grid. Expensive but I like it because I can reorganize as needed to new tools.


Sent from my iPhone using Tapatalk

what was the cost of the Matco Tool Grid?

 

[cderalow]

what was the cost of the Matco Tool Grid?

my google fu puts it as expensive as foaming them, maybe a bit more, but more reconfigurable.

 

[90roadster]

Added Vidmar box for all the hardware storage. Still need to install 1 long butcher block to span both boxes and hang upper cabinets

 

[Project_shadow]

I need some help guys, I need a bigger box for the house, my snap on dealer has this triple bay matco for 1500 delivered, my tools are spread between 4 boxes and sometimes it's an annoyance, this would take the place of a workbench and free up some room in my single car garage, is it worth the 1500?
I didnt think theres be a better place to ask than here

Sent from my SM-N950U using Tapatalk

 

[Richard Cranium]

offer him 12 or 13 hundred, he might bite. Being that you need it, Yes it is worth it...Rich

 

[Project_shadow]

offer him 12 or 13 hundred, he might bite. Being that you need it, Yes it is worth it...Rich

I offered 1100 and said 1500 is what he gave, so hes firm on price

Sent from my SM-N950U using Tapatalk

 

[LXCam]

I'm pretty damn sure my pocket would catch on fire pulling the money out fast enough PS.

 

[pioneer1]

Seen these the other day at Cargo Largo in Independence , MO. If I hadn't bought my HF 44 on Black Friday I would have jump on this. Have no Idea why 1 is marked 8 drawer. Homak website has them listed at 1690

 

[Project_shadow]

I'm pretty damn sure my pocket would catch on fire pulling the money out fast enough PS.

Ugh, how am I gonna explain this to the wife lol

Sent from my SM-N950U using Tapatalk

 

[619DioFan]

I'm pretty damn sure my pocket would catch on fire pulling the money out fast enough PS.[/QUOTE

Considering what that box would cost here in socal even used , it would be mine right now for 1500.

 

[ptgarcia]

It would be mine, too. Used boxes are stupid expensive around here. I would have bought the Homak box, too!

Sent from my SM-N960U using Tapatalk

 

[L.Cheapo]

It would be mine, too. Used boxes are stupid expensive around here. I would have bought the Homak box, too!

Sent from my SM-N960U using Tapatalk

Here too. My SO dealer has a brand new KRL1023 with bed liner top on his truck for $1000 less than the cheapest used one on craigslist in my area.

 

[51willys]

Flat file cabinet

 

[Red89gt]

I need some help guys, I need a bigger box for the house, my snap on dealer has this triple bay matco for 1500 delivered, my tools are spread between 4 boxes and sometimes it's an annoyance, this would take the place of a workbench and free up some room in my single car garage, is it worth the 1500?
I didnt think theres be a better place to ask than here

Sent from my SM-N950U using Tapatalk

I would have bought and put mine on Craigslist already.
These deals never seem to come my way.

 

[Project_shadow]

I would have bought and put mine on Craigslist already.
These deals never seem to come my way.

I'm not too keen on used box prices, I'm not sure the price of this one new, I just know its 8k cheaper than my setup at work lol

Sent from my SM-N950U using Tapatalk

 

[MikeF2316]

I'm pretty damn sure my pocket would catch on fire pulling the money out fast enough PS.[/QUOTE

Considering what that box would cost here in socal even used , it would be mine right now for 1500.

+1 send him to my neighbourhood, that'll be gone in a second!

 

[protegeV]

I'm not too keen on used box prices, I'm not sure the price of this one new, I just know its 8k cheaper than my setup at work lol

Sent from my SM-N950U using Tapatalk

Buy it Noooooooow

 

[Semi-hole mechanic]

My box. A CM homeowner box with my CM Ralleye box on top and a Menards intermediate box. Thanks to rhis site im probably gonna have to invest in a bigger boxor at least a cabinet with more drawers.