Let's see your toolbox.

[FirstStateTools]

This is the triple bank toolbox I have got for myself. I have a lot of boxes come through here as part of our business, but this one I had to keep for me.. I have it stuffed full and wieghed it that way at 4835lbs... It really is a beauty but not for the weak of pocket at all...

 

[FirstStateTools]

However these are the biggest and baddest i know of, only had 6 of these come through since we went into business.. a real monster.. The Snap-On Mr Big

 

[mikevango]

However these are the biggest and baddest i know of, only had 6 of these come through since we went into business.. a real monster.. The Snap-On Mr Big

i can only imagine how much **** i'd have piled up on that long *** bench top.

 

[muibubbles]

I am a deputy sheriff in Jefferson county arkansas. I find it important to keep a good set of tools and a floor jack in my car.

and a gun? assuming its real.. lol

 

[RbrtAWhyt]

I am a deputy sheriff in Jefferson county arkansas. I find it important to keep a good set of tools and a floor jack in my car.

Same here. We've got an interstate and several major highways running through our county. I've changed many tires for people over the years. I bought a small floor jack, a four-way and a pair of chocks a long time ago to make the job quicker and easier...

 

[RbrtAWhyt]

and a gun? assuming its real.. lol

No everything we do requires a gun.

 

[cowboy73]

Here's my toolbox. Got it for Christmas back in 1991. It's just an old crappy Popular Mechanics brand that was bought at the evil Wal-Mart. I think it was made in Taiwan, not really sure though. Simple sliding drawers, no ball bearings. But hey, it holds my crappy tools to work on my crappy cars

View media item 7626

 

[nflfreak43]

new pics after my reorganization... i got alot of sockets that i've got put away elsewhere that i use rarely..

 

[NJHandyGuy]

GEEEZ you love hf tools

 

[Thumper]

Here's my toolbox. Got it for Christmas back in 1991. It's just an old crappy Popular Mechanics brand that was bought at the evil Wal-Mart. I think it was made in Taiwan, not really sure though. Simple sliding drawers, no ball bearings. But hey, it holds my crappy tools to work on my crappy cars

View media item 7626

Hey man........that beats the hell out of what I started with.....

 

[gnx547]

GEEEZ you love hf tools

lol

 

[CD1]

and a gun? assuming its real.. lol

You caught that too.



It's a compact Glock, either a G19 (9mm) or a
G23 (40 S&W).



I keep mine in the gun safe!

 

[Jeff]

 

[RLRRLRLL]

Here's my toolbox. Got it for Christmas back in 1991. It's just an old crappy Popular Mechanics brand that was bought at the evil Wal-Mart. I think it was made in Taiwan, not really sure though. Simple sliding drawers, no ball bearings. But hey, it holds my crappy tools to work on my crappy cars

View media item 7626

So, its a 20 year old box, that did not cost a whole lot. I say, its a good box! You can spend alot more on a new one, but it will do the same thing that urs does! Last semester i took an 30 year old waterloo to school. People laughed at it im sure, but it held my tools just fine. It just didint like to roll around the shop, and i had quite a bit of stuff in it so the bottom was starting to bend in..so its retired to my garage where it dont have to roll around. Be proud of your box, nothing wrong with it.

 

[NJHandyGuy]

sharkin i like tha setup simple and clean

 

[Theloniousmonk]

View media item 7626

It's a good looking box that has apparently served you well... Are those shallow slider on the top/bottom small part drawers or covers?

 

[35mastr]

Heres Mine

View media item 7521

Do you have the parts number for the add on drawers for the cart. Also is that side cabinet the same depth as the cart? I have a black on that I have been kicking the idea around to do exactly what you did. But want to add a locker to the left side also.

 

[nflfreak43]

GEEEZ you love hf tools

they are low priced, work real well, havent broken any of them yet, have built a 347 Stroker and a 351W with em.. aint got any issue with em, will use them just as i will the Snap-On and Matco stuff i'm soon to have...

 

[cowboy73]

Those are covers for the drawers. The locks engage a small slot in them. I never lock it though.

 

[Monte]

@sharkin:
nice setup !

 

[mik641]

work toolbox

 

[RbrtAWhyt]

GEEEZ you love hf tools

Looks like he uses 'em too...

 

[ike34]

Do you have the parts number for the add on drawers for the cart. Also is that side cabinet the same depth as the cart? I have a black on that I have been kicking the idea around to do exactly what you did. But want to add a locker to the left side also.

Here is a link to the add on drawers
http://www.mactools.com/product/tabid/120/p-330448-mb197ucad-bk.aspx

Here is the side cabinet
http://www.mactools.com/product/tabid/120/p-329023-7-drawer-side-cabinet-galaxy-black.aspx

I have a side cabinet for the left side ordered, the side cabinets are not the exact depth, the are like 18 inches deep, they are not a bolt on, I made my own brackets and centered them on the side.

 

[trexdoink]

Socket drawer.

 

[Dart715]

I went to the snap on no compromise tour today. Picked up a green handle pick set, and met a snap on dealer. I can't upload pics yet cause I'm on my ipod

 

[Jeff]

@sharkin:
nice setup !

Thanks Monte, it's ALL your fault.

 

[PeteMoore]

First off i just want to say that this forum and this thread are awesome. I am a tech at a honda dealer, ASE master certified, 26 years old, and addicted to snap-on tools!!
My box at home is a KRL-1032

some of my tools.

and the most important tool of all.....

Does Monsieur Snap-On own your first born, your liver and your left testicle???

 

[Pug}{maN]

got some new stuff so new pics....

 

[1950bowtie]

My Mac/ Snap On Toolbox.

 

[scoutkid]

My first box that my parents got for me when I was about 16. Currently it holds overflow from estate sales, auctions, etc.:

Bottom box I picked up at an auction at work a few years ago. It holds pullers, files, tubing tools. The top box is a project for my buddy Steve, I may start a thread about it sometime.

My big Kahuna, and my big fat finger... oh well:

Big old Kenedy/Bott that I picked up at an auction from work. Its about 30" deep, roller slides. Weighs as much as a VW beetle. I think I gave $40 :

Saw this old girl at an auction this winter, packed up with odds and ends. I just had to have it. It will house any and all Snap On oldies/overflow. Anyone know an age or model? It's in fantastic shape.:

And my favorite of favorites - my OLD IHC box. Looks like it was probably mounted to a frame of a tractor at one point. Metal top and sides, wood bottom. :

 

[idoitproject]

Here are mine....no pictures of the inside yet.

36" upper and lower masterforce and a 41" lower masterforce, from menards. I plan to put a bench over the lower box and then a series of cabinets off to the right of that box too, painted to match the boxes.
I am really happy with these masterforce boxes...and lifetime warranty, they say.

Did they stop selling the 41" Masterforce?

 

[ZRX61]

Took new pics in the garage today for insurance purposes etc... This is a Stainless Torin box that Pepboys sold briefly. They listed at $400, but then had a $50 mail in rebate & a $100 store rebate so for $250 I grabbed it...

 

[ZRX61]

Then there is this one. POS from SamsClub.

 

[Turbo-J]

who makes that socket organizer?? Thanks

 

[ZRX61]

Next up is an older Craftsman used for welding stuff mostly.... altho the grinding wheels are for a tool grinder used for lathe tooling. Beater bag on the top weighs at least 180lb...Box looks a bit empty in places because a lot of the stuff is on the welding table.

 

[ZRX61]

Then there is another SamsClub special.... wooden work surface has some 2x4's & then a sheet of 5/16 steel used for welding...

But inside it's autobody stuff...

I actualy have two of these cabinets, the other is full of detailing stuff & is behind the bike so no pics of that one at this time.

 

[ZRX61]

... and the Hammerhead..

Standard:

Metric:

 

[NJHandyGuy]

GEEZ zrx you seem set up for anything

 

[ZRX61]

Yup, pretty much... & before anyone asks, I have no idea why there is a roll of Charmin on the bottom of the toolcart.

 

[ZRX61]

Here's that old Craftsman I got a while back:

Bottom has ammo & clays

Pipe wrenches..

Misc old stuff & 3/4drive socket set. Wrenches with blue tape are KingDick Whitworths

If you were wondering about the lack of visegrips in the toolboxes....I hang em up by the clamps etc..