Let's see your toolbox.

[bart1]

Who makes those rails. I know its been posted before I just can't find it

Ernst, I am pretty positive.

I just ordered a bunch of Wright that are very similar.

 

[Moose-LandTran]

@Balane

Your Dog keeps looking at me like he asked me a question I don't have the answer to?

He wants to know why the photos were used without permission.

 

[Monte]

.

Where have you been the last year ?

 

[zuspiel]

KRA4107FPC that I snapped up on Craig's list for $800

I'll post pics of the whole setup (including my new Hazet Assistent) when I get back into town and have a chance to catch my breath.

 

[zuspiel]

Where have you been the last year ?

Working my a$$ off... Glad to see the "tools from the old world" thread is still alive, Monte

 

[zuspiel]

Ernst, I am pretty positive.

I just ordered a bunch of Wright that are very similar.

Yes, that's correct. Love those things...

 

[bart1]

Yes, that's correct. Love those things...

I hope I am happy with my Wrights. Some here said they were better than Ernst (I have my doubts, but we shall see).

 

[zuspiel]

I just got some new ones with the twist holders. Much better for 1/4" stuff since the sockets come off easier...

 

[Rossco]

This is my Socket draw .. Still need to flea-bay a few missing sockets grr ..

 

[zuspiel]

Very nice!

 

[Rossco]

Very nice!

Thanks .. Not as many handles / sockets as you have .. Would you believe apart from the 1/2 chrome deeps, I Havent bought a socket in over 5 year ..

 

[Moose-LandTran]

Thanks .. Not as many handles / sockets as you have .. Would you believe apart from the 1/2 chrome deeps, I Havent bought a socket in over 5 year ..

5 years???

How'd you manage that, i struggle to go 5 days without buying one. Bought one two days ago because i was clucking..

 

[Rossco]

5 years???

How'd you manage that, i struggle to go 5 days without buying one. Bought one two days ago because i was clucking..

Yeah .. But all I need 1/4, 3/8 & 1/2 wise is right there .. I didnt need the 1/2 metric deeps as i have impacts but they were cheap .. I have socket drivers & 3/4 SO equipment in another draw .. Iam gonna add a little to the 3/4 drive before ordering more foam

believe me .. You can get by with a basic set .. When I first went to Nigeria I had the basics of basic tool kit and was expected to fix million pound equipment. Then in Ghana they threw the CAT set at us it was still basic ..

This was the CAT set minus a few important pieces ..

Tellin ya .. I could fix just about anything with a Shifter, rubber hammer and screwdriver

 

[KraftwerkMk1Jetta]

This is my Socket draw .. Still need to flea-bay a few missing sockets grr ..

impressive organizing, but to me it's just too neat. it's got no soul or character.

 

[Rossco]

impressive organizing, but to me it's just too neat. it's got no soul or character.

Thanks allot .. it looks great in the flesh. Typical soulless German efficency.

Didnt know I was designing a special place for my socket brother's & Sisters

And its a good thing ..I wont feel bad smashing a bushing in with an impact or smashing a deep 14mm onto a 3/8 bolt to get the job done

I dont know about you guys but I spend more time hitting my screwdrivers with a hammer than actually turning screws mmm

 

[metaldad]

Omg. Would somebody please post a picture of there toolbox so we can stop this petty ********.

not a toolbox. hope this is acceptable.

 

[jeffmoss26]

Holy hammers! Why so many? lol

 

[metaldad]

They were free?
i need to update pic and shoot alla them.

 

[afazz]

I like hammers too

I have 2 more in my car, 1 here on my desk, 2 in the mail, one I'm watching on ebay, and one I will probably buy tomorrow on my way home.
(I wish these were free!)

 

[afazz]

I took this pic a while ago and forgot to post it. I got this awesome old toolbox from my Grandpap.

 

[sscustom]

DAMMM i need more hammers you guys got tons

 

[myboostedgst]

Finally got myself a box! I wont need it until next spring when I move out and get my own garage/project car, but I figured why not. Might as well start collecting my setup now.

I still have a lot of tools to get. Most of the drawers are quite bare and will be filled shortly.

Top Drawer. All Craftsman besides socket trays, a Snap-On and SK 18" extension, and 3/8" and 1/2" breaker bars.

All Craftsman wrenches besides a set of Gearwrench metric wrenches. Craftsman screwdrivers.

Box full of duplicate Craftsman sockets and wrenches.

 

[ephotrod]

Hammer Time! Can't touch this! Can't touch this! Oh Oh Oh Oh
Josh

 

[Linda@Lista]

I'd prefer you do not. Thanks.

I apologize for any inconvenience. I have removed all of the photos.
Linda

 

[Linda@Lista]

With all the power tools and gadgets these days, I bet you see more of these on the market...a bolt-on shutter door side cabinet with power strip. Simple to make. Linda....I'd love to see something like this from Lista in 22" and 28" widths (15" deep) for use with Lista cabinets and workstations.

Steve D

Thanks Steve,
I'll share this and see if anything is in the works.
Linda

 

[Furious D]

You are all making me sick with your organized tool boxes. This is mine after a couple hours of cleaning the garage this weekend.

I inherited this from a neighbor that I looked out for over the years. He was a
Dodge Mechanic in the 50's and 60's. Note the 1965 Snap-On calender which was the year He retired.Its special to Me and I hope to hand it down to my son.

 

[Chloe]

I was looking at nice toolboxes on ebay and stumbled onto this... looks amazing and they are in Tampa. My wife would kill me in my sleep if I bought that though.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4522370035&category=35001

more of the same style...

http://cgi.ebay.com/ws/eBayISAPI.dl...91115&ssPageName=MERC_VI_RSCC_Pr4_PcN__Stores

This one looks so great!

 

[Crizzle]

In your sleep? My wife would kill me on the spot if I brought that home.

 

[freeskier]

i have that same park tool box, great travel box

 

[Painter123]

I was looking at nice toolboxes on ebay and stumbled onto this... looks amazing and they are in Tampa. My wife would kill me in my sleep if I bought that though.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4522370035&category=35001

more of the same style...

http://cgi.ebay.com/ws/eBayISAPI.dl...91115&ssPageName=MERC_VI_RSCC_Pr4_PcN__Stores

I own that bottom box and have since 99 or 2000 I forget now
I used the **** out of it till I got the HF 72"
The SS box is/was pretty nice considering what I paid for it but it alawys drove me nutz that there wasn't one long top drawer
and the drawer sizes/depth arn't the best use of space
It's not really SS either my lasers an levels stick to it all over the place
But it did hold up well to the abuse of overloaded drawers that got opened sometimes 20+ times a day

If you were closer to Vegas I'd make ya a deal on it

 

[mrobins297aaa]

here's one of mine, unfortunately i don't have the matching bottom. I bought this on ebay about 6 years ago for $385, the guy was local so I picked it up.

 

[Racr350]

here's one of mine, unfortunately i don't have the matching bottom. I bought this on ebay about 6 years ago for $385, the guy was local so I picked it up.

NO WAY!!!!! I owned a 40th prior to my current vette. I had no idea Snap-On made a box like this! What I would've done to have that box... Awesome box sir.

 

[metalhead212121]

NO WAY!!!!! I owned a 40th prior to my current vette. I had no idea Snap-On made a box like this! What I would've done to have that box... Awesome box sir.

search craigslist and ebay... they pop up from time to time.

Dan

 

[mrobins297aaa]

NO WAY!!!!! I owned a 40th prior to my current vette. I had no idea Snap-On made a box like this! What I would've done to have that box... Awesome box sir.

thanks, they also made them in turquoise.

 

[ZRX61]

I own that bottom box and have since 99 or 2000 I forget now
I used the **** out of it till I got the HF 72"
The SS box is/was pretty nice considering what I paid for it but it alawys drove me nutz that there wasn't one long top drawer
and the drawer sizes/depth arn't the best use of space
It's not really SS either my lasers an levels stick to it all over the place

Some Stainless is magnetic, some isn't. The box pictured is a genuine hammerhead, not the later CSPS **** that Costco sold after the deal with hammerhead went **** up.
After the end of the Costco deal those boxes were advertised by Hammerhead at $3700.00... They went out of business shortly after....

 

[Indy_500]

here's one of mine, unfortunately i don't have the matching bottom. I bought this on ebay about 6 years ago for $385, the guy was local so I picked it up.

that thing looks so nice i'd be afraid to use it!

 

[Moose-LandTran]

not a toolbox. hope this is acceptable.

I see you do everything but electrical.

 

[les_garten]

I see you do everything but electrical.

Now that's Funny!

 

[Jeeper]

My KRL722....

Top Drawer- Sockets, Ratchets, Impacts

Wrenches

Torque wrenches & Screwdrivers

Pliers & Vicegrips

Punches, prybars, files

Hammers & Sprays

Service manuals & Blowmolded storage

 

[Rossco]

^^^ Nice Box & Set up.

Some quality torque wrenches there .. SO? I was issued two CAT (SO) Wrenches and had no complaints.