Let's see your toolbox.

[route246]

I'm getting ready to post some pics. Can I attach any resolution pics and vBulletin will resize them or do I need to resize them prior to attaching and uploading? These pics are currently 21MP and 13MP.

 

[omr]

Photo bucket resizes automatically .

 

[route246]

I didn't want to use links. I have a private gallery for doing this already. I wanted to just take shots and upload directly here without dealing with any gallery interfaces. URLs break. Uploaded content usually does not.

Photo bucket resizes automatically .

 

[omr]

The image code posts the picture not the link.

 

[twincam00]

you dont have to resize when you upload directly to GJ, it resizes automatically

 

[tjmonsen5]

After taking pictures of my box, i realize its actually quite un-organized. yikes!

 

[kippieland]

After taking pictures of my box, i realize its actually quite un-organized. yikes!

Looks like your sponsored by Craftsman

 

[tjmonsen5]

Looks like your sponsored by Craftsman

Yea I own basically 99% craftsman. My grandpa started me out with a starter kit, and bought me tools for my birthday and christmas since I turned 16. Now, 6 years later, this is how much my collection has grown! I now have a set of SnapOn flank drive plus wrenches, seen sitting flat and alone in the wrench drawer, and a few SK ratchets. Time to upgrade to truck brands for a fer certain items.

 

[jeffmoss26]

In your picture of the screwdrivers, what is the red flathead 2nd from the right?

 

[tjmonsen5]

Its an old one my grandpa gave me, it has a handle that folds out to give you alot of torque. Pretty cool, USA made.

 

[tjmonsen5]

The screwdriver says TUFFY on the handle.
Inside the handle, it says Swallow Airplane Co. Inc. Wichita Kansas USA, Patent Pending
It also has a ball bearing like in a ratchet to hold the handle tight tight when closed.

 

[TheGrooveking]

The screwdriver says TUFFY on the handle.
Inside the handle, it says Swallow Airplane Co. Inc. Wichita Kansas USA, Patent Pending
It also has a ball bearing like in a ratchet to hold the handle tight tight when closed.

Very, very cool.

TheGrooveking

 

[05CarbonDRZ]

Why do people use the quote feature on a post with a dozen pics? It just clogs up the whole thread with a bunch of double pictures.

 

[G1GRANDEUR]

Because lazy.

 

[Garagefanatic97]

thats a cool looking screwdrver

 

[98TJ]

The HF 56" I'm working on. Don't think I've stuck this one in here.

 

[evan71]

The HF 56" I'm working on. Don't think I've stuck this one in here.

how tall is the addition to your box? is that a metal or wood frame?

 

[98TJ]

Metal.

It's 33" tall.

 

[johninbanagher]

The HF 56" I'm working on. Don't think I've stuck this one in here.

wow that is a sweet addition

 

[SeanConklin]

My tool storage

Now I am officially jealous. Semper Fi Brother

 

[jf781]

Heres my cheap box. The old craftsman was getting full and didn't want to put a bunch of money down on a new box with x-mas coming. Saw the file cabinets and the drafting cabinet sittin on a pallet at work and asked if they were going to use em, said no. Offered them 20 for it and they helped me load them up.I have another one of the drafting cabinet's I'm not going to use so I most likely will put it on craigslist.

The drafting cabinet is really pretty stout. Made to hold architectural drawings. All metal with ball bearing slides. Drilled some holes and bolted it to the file cabinets. Worked well so far. The drawers are pretty deep as well deep as well 30" or so.

 

[Black89LX]

long post so look at the pictures and come back and read what I have listed.

This is my Snap-on 40" Heritage Series 6 Drawer bottom with a 4 drawer top chest kra2106fpc kra2104fpc. I made the mechanic's seat and that's my yellow Lisle Jeepers Creeper 93102.

Top Compartment: Pittsburgh prybars 1654, Snap-on 36" striking pry bar, Snap-on pick set, Cornwell hose cutter, Wiss tin snips, OTC Stinger punches, Duracraft mallet and sledge, Snap-on plastic, dead blow, and dead blow ball peen hammers, Central Forge mini hammer, magnetic dish with two mirrors and valve core tool Stanley tape measure. then there's a Mag-Lite and some pens and other writing instruments.

Drawer 1: Snap-on screwdrivers; hard handle and instinct soft grip, hard handle ratcheting screwdriver. Snap-on gasket scraper, Red Devil putty knife, Channellock pliers and adjustable wrench, Irwin Vise Grip fast release locking pliers, Tool-Aid wire stripper. a Craftsman, a Harbor Freight and a Snap-on hose pick. Craftsman chisel holder.

Drawer 2: Craftsman Pro combination wrenches, Craftsman full polish flare nut wrenches and GearWrench ratcheting wrenches and bit/socket adaptors.

Drawer 3: a variety of Harbor Freight, Craftsman and Snap-on ratchets. Craftsman sockets, u-joints, extensions and adaptors. Snap-on 3/8-1/2 adaptor and 1/2-3/8 adaptor. Snap-on Torx and hex bit sockets, Craftsman tamper-proof torx bits and Gearwrench screw bit sockets. not seen is a set of metric Snap-on flare nut crowfeet and Craftsman nutdriver bits.

Drawer 4: Snap-on u-joints, extensions, shallow and deep impact sockets; 3/8" drive 6pt: 8 - 24mm, 5/16 - 1". 1/2" drive 6pt: 10 - 24mm 30 and 33mm deep, 3/8 - 1-1/4" and 1-5/16" shallow. 1/2" drive 12pt 1/2" shallow. also, 3/8" dr. shallow swivel sockets 8 - 19mm and 21mm 3/8 - 3/4". Pittsburgh 3/4" dr. 8pc impact socket set 1 - 1-1/2". Ingersoll Rand 2115TiMax, 2135QTiMax and 1/4" dr. air ratchet. Florida Pneumatic 3/8" dr. air ratchet. Dura-Block die grinder and cut-off wheel. grinding stones. Craftsman medium duty air hammer with Tool Aid quick change adaptor. variety of air hammer bits; tapered punch, straight punch, hammer head, exhaust cutter, chisel. Flexzilla swivel whip hose. Blue-Point blow guns JT13B and YA1050B, and air chuck YA173B. Cyclone F1 blow gun.

 

[Black89LX]

the bottom box

Drawer 5: parts, GearWrench flex head ratcheting wrenches. Irwin Vise Grip 7pc fast release locking pliers set. 757KBT and 11R. Snap-on 4pc snap ring pliers set SRP400A. Lincoln pistol grip grease gun and suction gun.

Drawer 6: Snap-on 586 multimeter and test light. heat gun, temp gun, butane torch, soldering iron, remote starter.

Drawer 7: Snap-on Click-type Torque Wrenches, Angle Gauge, Tap and Die Sets. stamping set, fluted easy out socket set, dial indicator, dial caliper, digital caliper, micrometer set.

Drawer 8: Mityvac brake bleeder/vacuum test set, Blue-Point brake tube flaring set, Snap-on 7pc brake service set, oil filter wrenches, oil filter pliers, brake tubing bending pliers, spring compressor, shaker siphon, Snap-on 5pc battery service set, hydrometers. C-clamp, hose pinch pliers, spring brake caging bolts.

Drawer 9: DeWalt DCD760KL Drill and DW908 Light, screwdriver bit set, drill bit set, files, mini files, brushes, Blue-Point pinch bars BLPPB704, my own seal puller, Pittsburgh rolling head prybars 68339.

Drawer 10: Snap-on Fuel Pressure Gauge Set, Snap-on Compression Gauge Set, Snap-on Vacuum Gauge Set, Snap-on Cylinder Leakage Tester, Blue-Point ear muffs. paper towel, kneeling pad, box, chain, goggles, air tool oil, Goo Gone, one man brake bleeder kit.

 

[chickenfarmer]

Someday it'll be bigger...

 

[98TJ]

wow that is a sweet addition

Thanks. There's a build-up of it that starts here.

 

[Garagefanatic97]

thats a cool lookin box

 

[metaldad]

that is a nice topper you built, 98

 

[muncie21]

Someday it'll be bigger...

Yep, pop told me that too.

 

[HarrisonTX]

--Labeling in progress.
Big decision now is to pull the CRAFTSMAN logo's or not.
This is my first box that I got when I was 17.

 

[98TJ]

--Labeling in progress.
Big decision now is to pull the CRAFTSMAN logo's or not.
This is my first box that I got when I was 17.

Man, I wish I could paint like that.

Might have to teach myself one day.

 

[garageworksln]

My little cart, gets the job done for now

 

[NJHandyGuy]

nice like the organizers

 

[ishiboo]

My little cart, gets the job done for now

Really love the black HF cart... best $99 I ever spent!

How do you like that wrench organizer? I bought the same from Sears for my Kobalts... seems it's pretty condensed compared to the wrench racks they came in, but it may be harder to find/replace?

 

[punkenduro]

pull the labels and paint it back on with the same lettering, thats bad *** man.

 

[90gt]

Hello, i am 19 years old and work in a small 2-bay gas-station shop. Here is my toolbox, have since added more stuff and moved some things around. a combination of craftsman, mac, snap on, a little bit of SK and HF.

 

[garageworksln]

Really love the black HF cart... best $99 I ever spent!

How do you like that wrench organizer? I bought the same from Sears for my Kobalts... seems it's pretty condensed compared to the wrench racks they came in, but it may be harder to find/replace?

It works great, it is pretty condensed but I got use to it and grab all the wrenches by memory. Yup was the best $99 I spent so far, its makes life easier then running back and fourth to the tool box

 

[FlatBlackBlaze]

Well, here she is. Sorry in advance for the horrible quality.

<a href="http://s110.photobucket.com/albums/n111/drumzrule07/?action=view&current=1.jpg" target="_blank"><img src="http://i110.photobucket.com/albums/n111/drumzrule07/1.jpg" border="0" alt="Photobucket"></a>

<a href="http://s110.photobucket.com/albums/n111/drumzrule07/?action=view&current=2.jpg" target="_blank"><img src="http://i110.photobucket.com/albums/n111/drumzrule07/2.jpg" border="0" alt="Photobucket"></a>

<a href="http://s110.photobucket.com/albums/n111/drumzrule07/?action=view&current=3.jpg" target="_blank"><img src="http://i110.photobucket.com/albums/n111/drumzrule07/3.jpg" border="0" alt="Photobucket"></a>

<a href="http://s110.photobucket.com/albums/n111/drumzrule07/?action=view&current=4.jpg" target="_blank"><img src="http://i110.photobucket.com/albums/n111/drumzrule07/4.jpg" border="0" alt="Photobucket"></a>

<a href="http://s110.photobucket.com/albums/n111/drumzrule07/?action=view&current=5.jpg" target="_blank"><img src="http://i110.photobucket.com/albums/n111/drumzrule07/5.jpg" border="0" alt="Photobucket"></a>

 

[Subyroo651]

Finally posting my modest tool cart. Its far from the massive boxes y'all have here but I work in IT and wrench just for fun. The Ratchets are all Green now and I have a GearWrench Geardriver set as well now.

Please no flaming on the Snap-On logos, I just couldn't stand looking at US General

 

[jeffmoss26]

Nice setups guys!

 

[DonkDonk]

Here is mine... KRL761/791 combo. Top to bottom: