Let's see your toolbox.

[metalhead212121]

Still working on organizing

Whats up with the different color sockets in the upper left hand corner of the pic?

Also... how do you like that small compressor in the pic? I know its NOT gonna be good for lug nuts and stuff like that... Ive seen one or two for sale on craigslist. Just wondering if they are worth the 40 or 50 bucks people are asking for. I need something like that to air up tires in my garage.

 

[Bears Fan]

Here's my boxes the one on the left is a 1980 set and the one on the right is from 1973, I'm looking for a top chest to match the 1973 box, it does not have to be a 1973 but i definitely want it gray and red to match and in decent shape, the 1973 roller cabinet is 26 1/4" wide on top, anyone got one lying around?

 

[karl1672]

Alan, the polished ones seem to be a little fatter than the non-polished, maybe it's me, or a bit different taper. Love both sets. Will definitely add more Wright. Seem to be a good value.

 

[karl1672]

Metalhead,

The colored sockets are a beater set I got at HF.

The compressor's OK, use to to run light air tools, tires and blow guns. Like the portability. Had it for a year or two and no problems so far. It does like to run!

 

[alan camby]

Alan, the polished ones seem to be a little fatter than the non-polished, maybe it's me, or a bit different taper. Love both sets. Will definitely add more Wright. Seem to be a good value.

Thanks for the picture. My dad has that same 9/16" wrench, i borrwed it the other day to campare to my Craftsman and SO wrenches. I like it, Just curious what the difference was between them and polished. Looking like just the finish.
Just received a set of midget Wrights tonight. 4mm to 11mm 10 piece set #788

 

[Tim Cowan]

Karl 1672, looks like a great collection of tools there. You need to go to the junkyard and drag home a project to strip down and get them dirty to ripen the chrome up....

 

[flht1997]

I bought the bottom new in 93' the top used off the tool truck about 96' and the side from a guy i worked with in about 97'. Real dirty right now,

 

[Spam16v]

Who makes the rack that your nut drivers are lying in?

 

[dodge610]

Who makes the rack that your nut drivers are lying in?

Looks like an ernst rack to me I have a couple that look just like them I got of ernst manuf.

 

[karl1672]

Karl 1672, looks like a great collection of tools there. You need to go to the junkyard and drag home a project to strip down and get them dirty to ripen the chrome up....

Well, last year I sold my '70s SO collection I had when I was an A&P back the early 70s. Figured I wouldn't be doing much wrenching so didn't need the stuff. Low and behold, restoring a C3 Vette, so had to "re-stock". There's still some old SO, Bonney, Utica, etc. in the box though.

Here's a couple of the old guys

 

[alan camby]

[QUOTE

Who makes the rack that your nut drivers are lying in?QUOTE]

Yes it is Ernst. Not a one piece rack, but 2 seperate rubber pieces that grab the drawer

 

[TjoFrasse]

would you recommend the bahco ratcheting screwdriver (bottom left on the picture)? I am asking myself if I should add that to my order.

The ratcheting action I would recommend. The handle is not optimal for my hands (I prefer Weras handles). The stubby and T-handle is more comfortable in my opinion.

I recently bought my first tool cabinet for my garage. I have been operating with carry tool cases and trolleys for 30 years but now I bought a real (smallish) tool cabinet. And then I got some organizers for it after learning about them on the forum.

Where is the socket and wrench organizers from? Did they come with the box?

Very nice tools! Thanks for sharing. I love seeing "foreign" garages and that one looks very clean and well lit! What is that red buggy?

Thanks! In Sweden it is quite common for car interested people living in a city to share a garage. This is a converted old industrial warehouse. We've been there for 7 months, so it's still somewhat clean. My tools are not "common swedish" though, since I'm quite influenced by being here The buggy is a unshortened model, unknown body manufacturer. Built on a 1500 -67.

 

[TonyCH]

Where is the socket and wrench organizers from? Did they come with the box?

Thanks for asking, I got them from fleabay. Lets see if I can find them for you...

Don't know if its ok to post live auctions so I just give you a search phrases to use in ebay.com:
- 76 Piece Ultimate Wrench Organizer Toolbox Wrench Rack
- Northern Toolbox Socket Organizer Model# 178495
- PLYWORX Tool Box 18" Plier Rack

Frasse, just noticed you are in Sweden, hejssan. I too have resently joined a shared garage and that is where I have been putting a tool setup together. Just to let you know, I have some 3/8" and 1/2" SO ratchets which I am willing to sell (too many duplicates). Some older types but also dual 80s. If you are interested send me a private message and I'll let you know what I have. I can send them to most of EU so guys in Germany, UK etc. are welcome to inquire too.

 

[jeffmoss26]

The Ratchet Man, very cool! I like that small reversible screwdriver (red)! They seem to go for a LOT of $$ on ebay!

 

[cderalow]

[QUOTE

Who makes the rack that your nut drivers are lying in?QUOTE]

Yes it is Ernst. Not a one piece rack, but 2 seperate rubber pieces that grab the drawer

$7-20 on amazon.

I just snagged a set because I've been wanting something to stick my screw drivers on.

looks like that will be perfect

 

[The Ratchet Man]

The Ratchet Man, very cool! I like that small reversible screwdriver (red)! They seem to go for a LOT of $$ on ebay!

Thanks. I'm very patient when it comes to Ebay. Give it time and exactly what you want will come up for sale at the price you're willing to pay.

I purchased that screwdriver you speak of for $9 with free shipping. It was a right place right time kind of deal. It had only been up for 8 minutes. At that time they were going for around $30 at auction. Nowadays they go any where from $45 to $60 with some of those being used. Last week one with the packaging went for $74 at auction. That's crazy for a pocket screwdriver!

 

[mikeselky85]

this is my brand new KRL7023, will get some pictures of the inside and better quality sometime.

 

[wchamberlain]

^^^^^^ Digging that KRL 7023.......Very nice!!!!!!!!

 

[mikeselky85]

thanks, i wasnt looking for this big of a box, but when i was told the price i almost couldnt say no...but the cranberry color was the true deal breaker

 

[crewchief888]

thanks, i wasnt looking for this big of a box, but when i was told the price i almost couldnt say no...but the cranberry color was the true deal breaker

cranberry is my fav color other than red

 

[Super Sport]

It's nothing special, but it's my first box:

No pics of the inside because it is terribly cramped and unorganized at the moment. I have the matching top box, but with the second middle chest it's too tall. I can barely see in the drawers in the little box that's currently on top.

Been debating on getting a bigger box and moving this one to the basement or something, or just buying a second box close to this size and having both out there. If I could find a clean vintage Cman box for a decent price my decision would be easy...

 

[NJHandyGuy]

so my last box was getting kinda cramped and i needed something bigger normally i wouldn"t have entertained it but i got a so so deal on it being a scratch and dent special

probelm is i have no time to fix it

 

[GeorgiaHybrid]

so my last box was getting kinda cramped and i needed something bigger normally i wouldn"t have entertained it but i got a so so deal on it being a scratch and dent special

probelm is i have no time to fix it

Scratch and Dent????

With you being in New Jersey, I figure anything that isn't totaled by a NYC driver or filled with bullet holes is considered "pristine"......

Nice looking box.

 

[Spiritoak]

So I finally received my powertop and hutch!





Instead of buying a hutch light from Snap-on, I bought some undercabinet lighting from Home Depot and rigged it up.

 

[Squints]

Instead of buying a hutch light from Snap-on, I bought some undercabinet lighting from Home Depot and rigged it up.

Nice setup! Want to buy the hutch for mine ( krl7023) in the future!
Don't blame you in going with the home depot lighting.... The snap on ones are WAY overpriced!


Sent from my iPhone

 

[rmchrgr]

Finally getting around to posting my junk here. I am a B tech at a Jeep/Hyundai dealership.

My box is nothing special. I got it used when I traded up from my starter Snap On box. I like having the locker. I also like the stainless top.

I don't have every tool known to man either. I went through a tool buying frenzy my first year of working but I've slowed down considerably. I try to only buy what I need but I also live by the rule that if you borrow something more than twice its time to buy it.

I know everyone loves pictures so here we go;

Top draw - sockets, long extensions, torque wrenches etc.

Second down - wrenches, extensions, reducers.

Number three - screwdrivers, trim tools, chisels, pinches, screw extractors.

Plier draw, electrical stuff.

BFHs, hole alignment tools, clutch fan tools, small prybar, cordless driver, trim tools.

Air tool drawer

Gear wrenches, grease gun, tie straps, bungees, big torque wrench.

Locker - kind of a mess right now.

Stainless top.

I'll post my cart in the appropriate thread.

 

[Jeeper]

Finally getting around to posting my junk here. I am a B tech at a Jeep/Hyundai dealership.

Nice setup. What is a B Tech? Good to know a pro Jeep mechanice.

 

[metalhead212121]

Nice setup Spiritoak... where'd you get the hooks to hang stuff on the inside of your hutch? I looked through my snap on catalog and didnt see any hooks. Went to Lowes and Home Depot and they didnt have any hooks that would work with Snap on hutches. Theres a vendor here on garage journal that sells hooks but Im not sure if they will work or not. I'd hate to buy a couple hooks... find out they dont work and then go through hassel of sending them back.

 

[Camtwo69]

Is that a snap on stainless top ?

 

[wrnchmonkey]

I posted a couple pages back and got a chance to get 2 drawers picture taken

 

[wrnchmonkey]

btw theres a few things added and my 8 snap on ratchets are in my cart

 

[Altec]

Look at that green! That is amazing!

 

[lilvex]

I see all you guys have a rack for your pliers and vise grips where do you purchase it ?

 

[Outlawmws]

I see all you guys have a rack for your pliers and vise grips where do you purchase it ?

I made one from a wire CD rack, but fair warning, if you rack from the grip side you can't put padded grips in the gap, and if you rack from the business end, things with external nuts like slip joints won't fit.

Some have used wire shelving, and some have used cut down wire dish racks.

Then there are the guys that buy them factory made.

Where is the sport in that?

 

[metalhead212121]

I see all you guys have a rack for your pliers and vise grips where do you purchase it ?

http://www.ebay.com/sch/i.html?_nkw...re+rack&_osacat=0&_trksid=p3286.c0.m270.l1313

hope that helps....

 

[rmchrgr]

What is a B Tech

Someone who does not make a lot of money.

Journeyman I guess? In between a rookie and a master.

 

[cotjocky]

Nice setup. What is a B Tech? Good to know a pro Jeep mechanice.

Per this site...

http://www.ststire.com/about-us/career-opportunities/b-technician.php


It means this:

B - Technician or General Repair Technician

The Position referred to as B-Technician or General Repair Technician describes an individual who has a minimum of 3 to 4 years of hands-on automotive experience, including the tools required to perform general automotive repair and maintenance. The ideal candidate will be a hard- working, self-motivated individual who is eager to learn the tasks and competencies required to work on today's complex vehicles. ASE certification and experience gained through On The Job Training and Career Development Assistance will provide a clear Career Development path. Unlimited growth and earning potential through hard work and Employee Stock Ownership will provide a sound future. The primary job function will include, but will not be limited to Tire and Wheel Services, General Automotive Repair and Maintenance, Steering, Suspension, Brake, Ignition, Fuel System Service and Facility Maintenance. State Licensing may be required to perform certain job functions.



I bet that would be close to what he means.

 

[rmchrgr]

I bet that would be close to what he means.

That description is kind of misleading but close enough. I actually do all sorts of stuff - diagnostics, electrical, head gaskets, timing belts, front end, brakes, services, tires etc.

I think the difference between a B and an A tech is that you can make time on involved jobs. Even if you have not done the job, you can figure it out quickly. I'm still on a learning curve. B techs still break stuff, get stuck on jobs, have come backs. etc. Some of the guys I work with have done jobs thousands of times where I've only done them a handful or not at all. The guy I work next to can do a heater core on an older Grand Cherokee in two hours, no exaggeration. Would probably take me at least 8, probably more.

It generally takes ten years of doing something every day to become an expert at anything. I've only been working in the field since December of '09. I do OK, getting better. Just trying to stick it out.

 

[jvitez]

Pliers and screwdrivers:

Greetings from one other of the only 25 million Finno-Ugric speakers on our globe. If you're in Suomi, where did you get Made in Canada Picquic screwdrivers?

 

[m_hatcher]

Finally got through all the pages of this topic and thought I should post some pics of mine, which I have just started collecting within the last month or so.
Top

[/URL]
Ratchet/Extension Drawer

[/URL]
Screwdriver Drawer

[/URL]
Wrench Drawer

[/URL]
Random Drawer

[/URL]