Let's see your toolbox.

[greg9719]

UPS Freight dropped this off today while I was at work. It's a Sunex 8057 in gloss black. It's much heavier duty than any of the tool boxes or service carts you'll see in any of the big chain stores. And, for me it has plenty of storage (for now). I even have one drawer that's totally empty. I taped a list of tools I need to buy next to the inside of the top.

I almost bought one of these. There was one on craigslist near me for $500. But I came across a snap on krsc46 for $600 I jumped on instead.

 

[rockinacummins]

Lets see some drawer pics!

Sure!
Waterloo box... Not really a good pic. I'll take some more tomorrow


Starting from the bottom - air and cordless


Impact sockets plus craftsman extreme access and (gasp) an empty drawer


Filter wrenches, punches, chisels and (gasp) another empty drawer


General stuff and extensions, torque wrenches


Gear wrenches and screwdrivers


Pliers and wrenches


And finally, sockets and ratchets!

 

[JonDick13926]

UPS Freight dropped this off today while I was at work. It's a Sunex 8057 in gloss black. It's much heavier duty than any of the tool boxes or service carts you'll see in any of the big chain stores. And, for me it has plenty of storage (for now). I even have one drawer that's totally empty. I taped a list of tools I need to buy next to the inside of the top.

Where did you buy it and what did it run you?

I've been looking at them on ebay...

I bought it from CPO via Amazon. You could also get it from CPO directly from their website. Either way, same price. $580 shipped for this color.

I almost bought one of these. There was one on craigslist near me for $500. But I came across a snap on krsc46 for $600 I jumped on instead.

In that case, I would have gone with the Snap On too. Especially since the Sunex can be had for only $80 more, new, shipped directly to you for free and a time most convenient for you.

 

[MrAperture]

Open drawer pic 72" x 22" x 69" of sexiness




Sent from my iPhone using Tapatalk

 

[Jarhead0408]

Whoa!! Nice box, but you're scaring me man! Sure hope it doesn't tip!

 

[rowerwet]

Purchased www.ebay.com/pliersrack They are called Plyworx and go for around 25$ you can also find em' in tool trucks.

I had one of those for a while, it didn't hold onto the pliers though and I would find them in a pile in the drawer. I bought the snap on wrench racks instead , ended up using them for my pliers, wrenches and screwdrivers, after a few years they are still great.

 

[6MocoA]

Open drawer pic 72" x 22" x 69" of sexiness




Sent from my iPhone using Tapatalk

Wow, that IS sexiness!

 

[captaincarpet]

I love my blue craftsman box, but that is awesome and then some!

 

[zkling]

I had one of those for a while, it didn't hold onto the pliers though and I would find them in a pile in the drawer. I bought the snap on wrench racks instead , ended up using them for my pliers, wrenches and screwdrivers, after a few years they are still great.

I really like that Lista box.

 

[MattVette89]

New Gearwrench 81916 and 81918 arrived today:





Earlier it was posted about the Snap On wrench organizers....anyone have a part number? I was also looking at the Craftsman foam ones.

 

[captaincarpet]

This is just simple sae and metric. ..View attachment 435072View attachment 435073 how do you fit everything into so few drawers...especially you guys with blow molded cases.. i need a way bigger box....

 

[jobo1004]

New Gearwrench 81916 and 81918 arrived today:

Were your gearwrench sets made in China or Taiwan?

 

[Dustin Pahl]

Sure!

Waterloo box... Not really a good pic. I'll take some more tomorrow





Starting from the bottom - air and cordless





Impact sockets plus craftsman extreme access and (gasp) an empty drawer





Filter wrenches, punches, chisels and (gasp) another empty drawer





General stuff and extensions, torque wrenches





Gear wrenches and screwdrivers





Pliers and wrenches





And finally, sockets and ratchets!

Hey how wide is your socket drawer?

 

[jobo1004]

36.75"

 

[MattVette89]

Were your gearwrench sets made in China or Taiwan?

The box says China, the tools themselves aren't marked.

 

[jobo1004]

The box says China, the tools themselves aren't marked.

I've got the gearwrench 81919 set and it was the same way. I was just curious.

 

[MattVette89]

I've got the gearwrench 81919 set and it was the same way. I was just curious.

The stubby flex gearwrenches in the bottom of the picture are older and Taiwan as far as I recall. The long ones I just got seem to be very nice quality, but I haven't put one on a bolt yet.

 

[broadway-k]

This is my toolbox

http:// [URL=http://s172.photobucket.com/user/brodyadamschevy/media/IMG_20150410_243615_031_zpsqstaqgh0.jpg.html] [/URL]This my first post ever so please bare with me lol. Pliers
http:// [URL=http://s172.photobucket.com/user/brodyadamschevy/media/IMG_20150410_243546_514_zpssbsw212c.jpg.html] [/URL]
http:// [URL=http://s172.photobucket.com/user/brodyadamschevy/media/IMG_20150410_243536_856_zpsw3tdvcvb.jpg.html] [/URL]
http:// [URL=http://s172.photobucket.com/user/brodyadamschevy/media/IMG_20150410_243526_849_zpsjl4gkhzv.jpg.html] [/URL]http:// [URL=http://s172.photobucket.com/user/brodyadamschevy/media/IMG_20150411_180924_604_zpsnfe1iepx.jpg.html] [/URL]http:// [URL=http://s172.photobucket.com/user/brodyadamschevy/media/IMG_20150410_243450_369_zpslszuv1nz.jpg.html] [/URL]http:// [URL=http://s172.photobucket.com/user/brodyadamschevy/media/IMG_20150410_243629_519_zpsxdrc4bdu.jpg.html] [/URL]

 

[Childiaugz]

 

[rockinacummins]

Hey how wide is your socket drawer?

jobo nailed it, 36.75"

 

[rodsnratfinks]

Moar!

Open drawer pic 72" x 22" x 69" of sexiness




Sent from my iPhone using Tapatalk

 

[MrAperture]

Moar!

 

[OCD]

Nice!!

 

[merbie]

Dude major jealousy


Merb

 

[courtheckman9423]

The Snap-on triple bank came outside for a wax.

 

[merbie]

Dude major jealousy


Merb

 

[merbie]

Awkward double post...


Merb

 

[GHBrumbaugh]

Finally got my lower cabinet organized. So time to share, then I need to finish the top chest.













Sent from my iPad using Tapatalk

 

[MrJason]

I seriously want to buy you a beer after seeing these pictures.

Jason

 

[MattVette89]

I seriously want to buy you a beer after seeing these pictures.

Jason

Agreed! That is painstakingly organized.

 

[MattVette89]

I picked up these cheap HF magnetic tool organizers for $5 each to keep my screwdrivers in check:



Still looking for the snap on wrench organizer part # if anyone has it handy.

 

[jobo1004]

Still looking for the snap on wrench organizer part # if anyone has it handy.

Maybe what you're looking for shows up in this search?

https://store.snapon.com/SearchResu...entName=All&Min=0&Max=0&FieldId=0&FieldValue=

 

[MattVette89]

Thanks for looking. I'm honestly not sure which it is....someone posted a picture earlier and it was a single row with slots in it. Might be one in the group you linked. I will have to look for the picture later.

 

[logixjock]

Paper Weights... guess where they came from.

Electrodes for a resistance welder?

 

[MattVette89]

I had one of those for a while, it didn't hold onto the pliers though and I would find them in a pile in the drawer. I bought the snap on wrench racks instead , ended up using them for my pliers, wrenches and screwdrivers, after a few years they are still great.

This is the post I was referring to earlier....anyone have this specific part #?

Thanks.

It looks slightly different that this on the website, but the pictures are not always accurate.

https://store.snapon.com/Wrench-Organizers-Wrench-Organizer-Red-For-larger-wrenches--P646906.aspx

 

[WhiffySpark]

The ones you linked are completely different. I have the ones in the link on my cart

 

[MattVette89]

The ones you linked are completely different. I have the ones in the link on my cart

Thanks. I wonder if those in the picture are discontinued?

 

[cadavjo]

I seriously want to buy you a beer after seeing these pictures.

Jason

Gotta throw the man-crush flag on this one...

Thou shalt not covet thy fellow man's... anything, You're a man, one up him... Eff.

 

[UserNameAttempt3]

Electrodes for a resistance welder?

Solid copper plugs from an Intel CPU heat sink. They were removed from a chunk of aluminum like this.

Now they are paper weights... but I need to sand the tops and bottoms smooth.

 

[UserNameAttempt3]

This is the post I was referring to earlier....anyone have this specific part #?

Looks like this one.

https://store.snapon.com/Workstation-Accessories-Tool-Organizer-Looped-12--P637273.aspx