Let's see your toolbox.

[dutchgray]

LowCapacity
Those Indestro short offsets sealed in package are lovely and must be a rare find like that, would almost be a shame to use them.

 

[LowCapacity]

LowCapacity

Those Indestro short offsets sealed in package are lovely and must be a rare find like that, would almost be a shame to use them.

My thoughts exactly, although I did poke one open and slipped a wrench out to try it. With the other wrenches I have I plan on keeping them unused.


Sent from my iPhone using Tapatalk

 

[LowCapacity]

Finally caved and ordered my dream box…

Love the yellow


Sent from my iPhone using Tapatalk

 

[LXCam]

My thoughts exactly, although I did poke one open and slipped a wrench out to try it. With the other wrenches I have I plan on keeping them unused.


Sent from my iPhone using Tapatalk

.

That's crazy talk. Bust those ******* out and use them ya tool polisher.

And welcome, your set up is looking pretty cool. Now all we need is a couple more guys to quote your picture post and this page will only take 30 minutes to scan through.

 

[LowCapacity]

.



That's crazy talk. Bust those ******* out and use them ya tool polisher.



And welcome, your set up is looking pretty cool. Now all we need is a couple more guys to quote your picture post and this page will only take 30 minutes to scan through.

I have plenty of other tools that have been thoroughly used! I worked in a garage for a bit years ago.


Sent from my iPhone using Tapatalk

 

[zkling]

Finally caved and ordered my dream box…

Awesome box, great drawer layout!

 

[LXCam]

I have plenty of other tools that have been thoroughly used! I worked in a garage for a bit years ago.


Sent from my iPhone using Tapatalk

It wasn't you I was poking fun at bud. We all dig seeing others tool collections, that's what the threads obviously all about. Problem is guys quote the same thing over and over and over again and it gets old as hell trying to wade through a gazillion pictures of the same thing.

Just saying.

 

[LowCapacity]

It wasn't you I was poking fun at bud. We all dig seeing others tool collections, that's what the threads obviously all about. Problem is guys quote the same thing over and over and over again and it gets old as hell trying to wade through a gazillion pictures of the same thing.



Just saying.

Oh I knew what ya meant about quoting pics, I know on some forums that'll get you banned!
I was just saying in regards to those unopened wrenches I have plenty of other wrenches (ok only a few compared to some people here, lol) that I can use before needing to break those unopened ones out.


Sent from my iPhone using Tapatalk

 

[Heaty]

Very nice man congrats on your dream. Although I must say I don't see too many new boxes in yellow anymore.
Hope to see drawer shots soon


Sent from my iPhone using Tapatalk

Love the yellow, I've seen yellow snap on krl boxes with black hardtop, black drawer trim and black corner guards on master series they Look freaking beautiful! Black and yellow never the less black chromey is nice too!

 

[Heaty]

Hell yeah, nice box! I am loving mine but having a hard time deciding how to organize each drawer. It's a lot of room but it also fills up quick.

Are the extra wide 3 drawers on KRL series new for 2015/2016? What's the product # on the orange box. I've never seen that besides the epiq series.

 

[90zcar]

It's hard for me to decide if I'd like the 3 extra wide drawers. I myself wouldn't even like 2.
What are you putting in the 3?
That's great tho that they are offering that.


Sent from my iPhone using Tapatalk

 

[scooterGA]

Like the yellow, I recently got the same box in flat black with cranberry trim. I have had mine for about a month. Have had more boxes in life than I can remember and this is without a doubt the nicest box I have ever had. I have already ordered the top for it. The yellow looks great congrats!

 

[3200fps]

Are the extra wide 3 drawers on KRL series new for 2015/2016? What's the product # on the orange box. I've never seen that besides the epiq series.

I think it's a new series, there is no info out there on their site. It's officially not released yet. KTL 7023, it's still a Master Series.

 

[DieselJH]

It's hard for me to decide if I'd like the 3 extra wide drawers. I myself wouldn't even like 2.
What are you putting in the 3?
That's great tho that they are offering that.


Sent from my iPhone using Tapatalk

I have sockets in the top, wrenches in the middle and then pliers and drivers in the bottom wide drawer. I'm still not to sure if I like the pliers/drivers there but it will do for now.

 

[DieselJH]

Are the extra wide 3 drawers on KRL series new for 2015/2016? What's the product # on the orange box. I've never seen that besides the epiq series.

Yes, they just debut it at the snap on expo 2015 in August. I'll have to get the whole model number from work but it is a KTL7023

 

[FOCUS.FREAK]

New drawer shot with the Ernst rails.

 

[Mastermind]

It's hard for me to decide if I'd like the 3 extra wide drawers. I myself wouldn't even like 2.
What are you putting in the 3?
That's great tho that they are offering that.


Sent from my iPhone using Tapatalk

I wish my 68 Had the 3 drawers, top is sockets etc. 2nd wide I have is pliers. In racks. Wrench drawer is getting tight. I hate having more than one wrench drawer. I can't buy anymore wrenches without a bigger drawer.

 

[LXCam]

New drawer shot with the Ernst rails.

Ummmmmmm, what Ernst rails?.

 

[FOCUS.FREAK]

Sorry my bad. Hansen socket by trays.

 

[anndel]

Nice boxes everyone!

 

[Timmeh90]

Just getting started lol. Armstrong Top with a Gray Tools bottom.



Tools are a mix of Mastercraft, Snap- On, MAC and others ....

Ratchets: Mastercraft, Snap-On and Pro Point


Extensions: Mastercraft and Snap-On


SAE Wrenches: Mastercraft


Metric Wrenches: Mastercraft


Screwdrivers


Pliers


Air Tools: MAC, Chicago Pneumatic, Cambell Hausfeld and IR


Sent via beer bottle floating in the ocean

 

[dodge610]

For just starting out that is a pretty nice set up you have there. And welcome aboard to the GJ cruise ship hang on its a bumpy ride sometimes.

 

[Rubiman14]

Finally upgraded my box. Been working out of a 40" & 26" Craftsman for far too long. Couldn't justify a big $$$ box, though. I'm bringing one of my old 26" boxes to work, and filling it with old stuff and some doubles/triples I had. I'll get some more drawer pics later. Still waiting on a bunch of new Snap-on goodies. SAE ratchet wrenches, line wrenches, deep chrome 1/2 sockets, 3/8 and 1/2 impact sockets, hex and torx bits, striking pry bars, pick set, long screw drivers, and some specialty stuff.

 

[FOCUS.FREAK]

Post some more photos when you can been eyeing that toolbox for some time

 

[Rubiman14]

Post some more photos when you can been eyeing that toolbox for some time

Will do! For the money it really is a nice box. It was hard pulling the trigger on something like this without ever seeing one...but I'm happy with the decision.

 

[FOCUS.FREAK]

Will do! For the money it really is a nice box. It was hard pulling the trigger on something like this without ever seeing one...but I'm happy with the decision.

That's exactly how I feel. I have an extreme toolboxes warehouse 30 minutes from home. So i got to first hand see the extreme brand boxes. They are the best bang for the buck I'd say. I can get the 72" extreme box triple bay for 1500 on a scratch and dent.

 

[WHEc716]

Picked this up today.

 

[mjoekingz28]

Good looking box and welcome to NC.

Sent from my SM-T320 using Tapatalk

Thanks alot for quoting the entire post!

 

[KamiCrit]

Just getting started lol. Armstrong Top with a Gray Tools bottom.

Nice box! I'm kinda in the same boat as you. I gotta Beach box with Proto topper, single bay like yours.

 

[dodge610]

Looks like its gonna be a crowded boat then. Me too

 

[dodge610]

Just afew of mine

Sent from my SAMSUNG-SGH-I547 using Tapatalk

 

[Farmall Cub]

Bought my Montgomery Ward toolbox in 1978 when I opened a small engine shop. It's done me well but I ran out of room some time ago.
A new HF 44" is on my Christmas list.​

 

[Timmeh90]

Nice box! I'm kinda in the same boat as you. I gotta Beach box with Proto topper, single bay like yours.

It's a good sturdy box combo, just wish it had a little more depth. But, gotta start somewhere!

Sent via beer bottle floating in the ocean

 

[Timmeh90]

For just starting out that is a pretty nice set up you have there. And welcome aboard to the GJ cruise ship hang on its a bumpy ride sometimes.

I have my life jacket and I am ready! Thanks for the welcome!

Sent via beer bottle floating in the ocean

 

[ChevyZ71]

Moved my box to my new job yesterday, was a little nervous about moving it, but it got there safe.


Sent from my VS985 4G using Tapatalk

 

[Red89gt]

That's exactly how I feel. I have an extreme toolboxes warehouse 30 minutes from home. So i got to first hand see the extreme brand boxes. They are the best bang for the buck I'd say. I can get the 72" extreme box triple bay for 1500 on a scratch and dent.

Same here, extreme let me into their Naperville warehouse to check out the boxes.
I bought the 56" set up for my home garage few years ago and it is awesome.

 

[FOCUS.FREAK]

Same here.

 

[Timmeh90]

Dbl post

 

[glenn27]

these two I have at the race shop.

*******************

Vern--I know this is 'old news'--but just read your posts, and I have that same older Craftsman Bottom box , on the right as you do. The gray and red one. I want to say mine dates most likely early 70's or so--When my son was in high school, he got a part-time job @ Ford/New Holland dealership--and I let him 'borrow' it to use , help get him started. Later--he went to work for CAT, after graduation--and by then he outgrew it--so he brought it back to me, but had a bunch of 'dealer supplies' (ADHESIVES/OIL/GEAR ADDITIVES ETC.)-- stuck in all the drawers. I guess that paid his rent for several years.



Thanks for the memories!

glenn

glenn

 

[77Ford]