Let's see your toolbox.

[Boepeep]

Here's my box I started college with last year

I filled it up using my student discount and had to upgrade. So I got this matco box off cl for cheap and now have plenty of room to fill up again

Sent from my SM-G900V using Tapatalk

 

[zkling]

If that wasn't red I'd say it was perfect because you still have somewhat of a work surface but yet have more storage now. The best of both worlds

How do the slides work on that with the drawers being right beside each other?
Now you just need to get matching lock cylinders to match your lower box. Or just get a new one for you lower box to match the top


Sent from my iPhone using Tapatalk

NO, it's a trap!!!! You place a hand full of parts on the small open area and then of course you have to open the bottom drawer but can't without cleaning the parts off first. Horizontal surface disease.

 

[logikal]

A little update

Stuff that won't fit into the Gerstner....

 

[logikal]

More....

And what all those tools are for....

 

[FOCUS.FREAK]

Pictures are not working on my end?

 

[90zcar]

Yeah I only see about 1/4 of them


Sent from my iPhone using Tapatalk

 

[jherb10]

I cant see the pics either

 

[jherb10]

Pics of my tool box drawers on my profile album

 

[MikeF2316]

Pictures are not working on my end?

They were working earlier. I saw a 911 race car with a Shell logo on the hood errr trunk lid, the reason for the tools. But now I don't see the pics either.

 

[Richard Cranium]

None of them are working for me either.

 

[G-Ram]

The pictures work fine on tapatalk, but not on my pc


Sent from my iPhone using Tapatalk

 

[Timmeh90]

Working fine on Tapatalk for me? Maybe something to do with photobucket?

Sent via beer bottle floating in the ocean

 

[Timmeh90]

Here is a wider shot of the tool box. Mine is the skinny one with TIM on it lol. Both snap on boxes are the cousins/bosses. Small guy on the work bench is an Ultra Pro with all his standard stuff thrown in.

 

[Mr.clean]

First post, long time reader. Figured I would start here. KRA2407 alittle customized from the rock & roll cab 8 drawers instead of 7. (4) 4inch and (4) 2 inch. Gearwrench,Craftsman,Snap On, some Mac and some odds and ends. Around the box is my mess of a workbench an old navy desk on a riser and a 6 drawer 26 inch craftsman box for loose ends (tygon, primer bulbs, headlight bulbs, steel wool etc...)

hope these bucket links work been a while since ive had one.



















































[/RIGHT]

 

[04chase]

As of yesterday .

Not sure what's next , probably a small roll cart. Or continue to stuff this thing.

Sent from my SM-G900T using Tapatalk

 

[WoodShopDisaster]

I made a quick video last night of whats in my box at work. Its a constant work in progress to get what i need and arrange it to my liking.

 

[zkling]

First post, long time reader. Figured I would start here. KRA2407 alittle customized from the rock & roll cab 8 drawers instead of 7. (4) 4inch and (4) 2 inch. Gearwrench,Craftsman,Snap On, some Mac and some odds and ends. Around the box is my mess of a workbench an old navy desk on a riser and a 6 drawer 26 inch craftsman box for loose ends (tygon, primer bulbs, headlight bulbs, steel wool etc...)

hope these bucket links work been a while since ive had one.

O... white with red trim.

 

[Mr.clean]

O... white with red trim.

Thanks, even my wife like it, before she saw the invoice....

 

[MagnumForce]

Ran out of room at work, new side cab for my masterforce 41.



Sent from my VS986 using Tapatalk

 

[Timmeh90]

First post, long time reader. Figured I would start here. KRA2407 alittle customized from the rock & roll cab 8 drawers instead of 7. (4) 4inch and (4) 2 inch. Gearwrench,Craftsman,Snap On, some Mac and some odds and ends. Around the box is my mess of a workbench an old navy desk on a riser and a 6 drawer 26 inch craftsman box for loose ends (tygon, primer bulbs, headlight bulbs, steel wool etc...)

hope these bucket links work been a while since ive had one.



















































[/RIGHT]

Welcome! I'm new here too. Very sharp looking box!

Sent via beer bottle floating in the ocean

 

[T_Roze]

I made a quick video last night of whats in my box at work. Its a constant work in progress to get what i need and arrange it to my liking.

Nice box! How do you like the led square snap on light you have on the inside of your top drawer?


Sent from my iPhone using Tapatalk

 

[zkling]

Ran out of room at work, new side cab for my masterforce 41.


Sent from my VS986 using Tapatalk

Do you actually use the slide out work surface on that box? They seem like nice boxes when I've gone over them in the store, but the work surface just seems like a waste to me.

 

[WoodShopDisaster]

Nice box! How do you like the led square snap on light you have on the inside of your top drawer?


Sent from my iPhone using Tapatalk

I really like the led light, its extremely bright, its magnetic and doesnt get hot so its great when i need to get into a tight spot and not drag my regular drop light around.

 

[Banjorear]

Here's my three:

 

[MagnumForce]

Do you actually use the slide out work surface on that box? They seem like nice boxes when I've gone over them in the store, but the work surface just seems like a waste to me.

Having a desk to do paper work, eat my lunch, set fiddly bits... No, I don't use it at all....

Sent from my VS986 using Tapatalk

 

[Chris_]

Sent from my SM-G900V using Tapatalk

 

[Chris_]

That's from a couple months ago, it's even worse now. I gotta get a bigger box.

Sent from my SM-G900V using Tapatalk

 

[wiens80]

Here's my three:

Sick quad carbed flathead!

 

[JoeR]

heres some drawer shots of my krl722

 

[dodge610]

No pic showing up i see this more and more just wondering what is happening.

 

[Outlawmws]

Any particular poster? or is it all? What about avatars?

What browser? Maybe try another?

 

[dodge610]

Any particular poster? or is it all? What about avatars?

What browser? Maybe try another?

Redneck welder had a post up there now his post is totally gone. i can see everyone elses. Just every once in a while the little green and black box on some posts will show up no biggie just wondered what was happening.

 

[zkling]

heres some drawer shots of my krl722

Awesome box and assortment of tools. What type of work are you in? Small aviation?

 

[G-Ram]

heres some drawer shots of my krl722

What brand are your impact socket sets?


Sent from my iPhone using Tapatalk

 

[ChevyZ71]

What brand are your impact socket sets?


Sent from my iPhone using Tapatalk

Those apper to be sunnex

Sent from my VS985 4G using Tapatalk

 

[JoeR]

Awesome box and assortment of tools. What type of work are you in? Small aviation?

What brand are your impact socket sets?


Sent from my iPhone using Tapatalk

Thanks, Im the painter/bodyman at an RV service center but do a lot more then just paint and bodywork. All my paint guns, buffers and sanding blocks are in my old craftsman stack

and yes those are sunex impacts. i bought all 3 master sets when they were doing the $100 rebate on them

 

[DieselJH]

I finally got some drawer shots of mine after getting everything organized.







And some of its resting place at work.

 

[ultgar]

Here's a small Facom box with a nice assortment of tools I put together for the holidays.....sorry about the large photos. These trays will also fit (snug fit) in a Craftsman tool box.

 

[rice rocket]

Those trays are cute, but the density is too low for my taste. If I had a whole drawer dedicated to 5 files and a hacksaw, I'd need about 30 of these.

 

[thegroundpounder99]

Here's a small Facom box with a nice assortment of tools I put together for the holidays.....sorry about the large photos. These trays will also fit (snug fit) in a Craftsman tool box.

Very nice. I've been thinking about shadowing my boxes but I'm afraid of loosing a lot of room. Those look really good though. Nice job.


Sent from my iPhone using Tapatalk