Let's see your toolbox.
- Thread starter wythors
- Start date
ultgar
Well-known member
I agree with you on the tray with the saw and the one with the hinged angle socket wrenches. If you've got a lot of tools, you need a bigger box....
Left to right:
KRA Classic 76 in Midnight Blue with bright chrome trim
Epiq 68 in Candy Apple Red with bright chrome trim
Epiq 60 in Midnight Blue with Titanium trim
--EDIT--The only box that is mine is the 68". I know when I was shopping it was difficult to find real world pictures of colors and configurations.
KRA Classic 76 in Midnight Blue with bright chrome trim
Epiq 68 in Candy Apple Red with bright chrome trim
Epiq 60 in Midnight Blue with Titanium trim
--EDIT--The only box that is mine is the 68". I know when I was shopping it was difficult to find real world pictures of colors and configurations.
Last edited:
dodge610
Well-known member
Left to right:
KRA Classic 76 in Midnight Blue with bright chrome trim
Epiq 68 in Candy Apple Red with bright chrome trim
Epiq 60 in Midnight Blue with Titanium trim
Some guys just have too many toys geez.
dodge610
Well-known member
Can I be your snap on dealer or you want to adopt me.Midnight blue with titanium trim. Need my address to send it to. lol
mjoekingz28
Well-known member
Slc97sr5,
What is that exhaust in the airplane's tail for?
What is that exhaust in the airplane's tail for?
I finally got some drawer shots of mine after getting everything organized.
And some of its resting place at work.
What tool box model KRL is that? It's not on the website. Need the specifications. Love the triple bank and the triple wide drawers.
DieselJH
Well-known member
It's a KTL7023. It's brand new for this year. It debuted at SFC2015 in August and I ordered it then. They are just now getting shipped out within the last month or so.
dodge610
Well-known member
It never gets old. The box maybe but I will keep her.Sent from my SAMSUNG-SGH-I547 using Tapatalk
ultgar
Well-known member
Here's some custom Lista boxes I had built 15 years ago. 3 of the same at a Porsche dealership in the burgundy/grey Porsche colors. A Lista DW, MP and SC width wall cabinet with a butcher block top. Length was close to 8' and weight around 800 lbs empty. Custom frame base to support the 1500+ lb estimated weight when loaded with tools.
The boxes are probably still around today. The Porsche dealership closed years ago. SD
The boxes are probably still around today. The Porsche dealership closed years ago. SD
zmotorsports
ALLIANCE MEMBER
Here's some custom Lista boxes I had built 15 years ago. 3 of the same at a Porsche dealership in the burgundy/grey Porsche colors. A Lista DW, MP and SC width wall cabinet with a butcher block top. Length was close to 8' and weight around 800 lbs empty. Custom frame base to support the 1500+ lb estimated weight when loaded with tools.
The boxes are probably still around today. The Porsche dealership closed years ago. SD
Very nice and clean looking boxes.
Mike.
KraftwerkMk1Jetta
Well-known member
That old school monitor looks out of place!
mattwhite079
Well-known member
Hey Diesel, how do you find the SO cover? Good quality and soft liner? Do you find you actually fit it each night? I've toyed with the idea of getting one but wondered if it would all become too much hassle.
St-rider
Well-known member
Here's a small Facom box with a nice assortment of tools I put together for the holidays.....sorry about the large photos. These trays will also fit (snug fit) in a Craftsman tool box.
Very nice but am I missing something? I see 10 drawer pics but only 9 drawers in the box pic.
Last edited:
DieselJH
Well-known member
I like it. I think it protects the box well. Excellent quality and fit. IIRC it's all vinyl other than the edges where it touches the box. It's has soft corner liners. I'd have to double check at work though. And I actually never take it off. I just unzip the front flap and fold it over the top of the box and the fold it over in half because I have stuff sitting on the back of the box and so the inside doesn't get grease or anything like that on it.
FOCUS.FREAK
Well-known member
I ordered my Master force toolbox on the 4th. Box is currently in Plano Illinois. Hopefully it will be ready for pick up soon.
I ordered the 72" in Blue.
I ordered the 72" in Blue.
ultgar
Well-known member
I did this project back in 2000 and the grand opening for the dealership was in in Dec 2000....15 years ago. This is what we got for monitors back then. The cars at the opening were also "old school".......
ultgar
Well-known member
Good catch.......I have 2 versions of drawer 3......one with Moto tools and the other with Fractional tools. SD
Last edited:
Did you really have to quote them all??
Apparently everyone has to quote the post with 10 pictures on this forum. Keeps me from reading most of these threads because of that. There's no reason to quote more than one picture, at most, ever.
Tundra
Well-known member
I did this project back in 2000 and the grand opening for the dealership was in in Dec 2000....15 years ago. This is what we got for monitors back then. The cars at the opening were also "old school".......
Jake C
Well-known member
Here she is. My tool vault is coming in toward the end of the week, so after i get all my stuff moved over I'll post an updated pic.
Last edited:
FOCUS.FREAK
Well-known member
Error 404?
fairmont2fast
Member
here is my two toys.
KRL1033 in green
KRL1022 in yellow
KRL1033 in green
KRL1022 in yellow
Richard Cranium
Well-known member
Waiting to see all 32 drawers also.
Waggoner72
Well-known member
Let me put my shades on first. [emoji41]
Picked up this 46" Beach box with 16" deep drawers yesterday. It has 23 drawers in total which is awesome! I am in the middle of cleaning it up and restoring it a bit, so far I am very happy with my purchase. A few dents and bent things but they will all straighten out. The steel top is welded on. It begs for a vise to be mounted to it!
I am planning on using this box for hardware, sandpaper, bits and pieces, etc. The idea is to use it to support my shop equipment, for example drill bits for the drill press.
I am planning on using this box for hardware, sandpaper, bits and pieces, etc. The idea is to use it to support my shop equipment, for example drill bits for the drill press.
Attachments
Jarhead0408
Well-known member
Here she is. My tool vault is coming in toward the end of the week, so after i get all my stuff moved over I'll post an updated pic.
Very nice setup. Look forward to more photos once the Toolvault comes in.
here is my two toys.
KRL1033 in green
KRL1022 in yellow
Nice combo! In for pics as well.
St-rider
Well-known member
Jake C
Well-known member
Thank you, you are the first person that I've seen address their post after this was brought up. I appreciate it, I hope you can understand our frustration over it and didn't take the complaint as personal.
canuckian
Well-known member
I'd like to thank you as well.
I wish more would take your lead. This thread is by far the worst for it as people post dozens of drawer pics in one post (and that's a good thing) but then it all gets quoted by someone saying "nice setup" or something of the sort.Thank you
Yes, I hope I didn't come off as rude. Some people just plain don't know any better when they quote a post. Should almost have some built-in forum programming that would address this
Sent from my iPhone using Tapatalk
One more guy saying thank you.