Let's see your toolbox.

[ihateminimumwage]

Will do may have to get a couple can use it on 2 or 3 of my boxes to free up space.

They work fantastic. I ran a black one on my service cart (which I sold), and then bought a red one for my shop box.

 

[dodge610]

Is that a 4dr. HF service cart. Was wondering if it would fit that too.

 

[ihateminimumwage]

Is that a 4dr. HF service cart. Was wondering if it would fit that too.

It is. Had to trim the lip on the top of the Sunex to fit, but it was quick work.

Also added a Sunex shelf to the other side.

 

[dodge610]

Ok thank you very much guess i need to make a sunex order up.

 

[Mr302Coyote]

Finally upgraded from the basic red Craftsman box. Girlfriend picked me up a 52" 9 Drawer with wood top, and a 27" side box. Spent a few hours organizing and putting tools in the big box. Still need to get liner for the side box so nothing is in it yet, but have a bunch of tools that won't get used as much that will go in it.

Here's the top drawer, and left side drawers.

Starting from top moving to bottom..

1. Sockets and Extensions
2. Metric Wrenches
3. Standard Wrenches
4. T Handles and Hex Keys
5. Air tools, Torque wrenches, and extra impact sockets

 

[Mr302Coyote]

And for the right side of the box.

1. Ratchets
2. Screwdrivers
3. Pliers
4. Specialty tools, and random tools.

 

[HagarTH]

I tried posting pictures but when I previewed the post they were much too large.

So with that, I have recently made a career changeand I am only just starting out. I actually start my first job this week at a large corporate chain doing the lowly employee work (which I'm not upset with). I have some more tools floating around my truck that I need to add to the box, but 8t gives you a gist of what it is lol. Haven't seen many 26" boxes throughout the thread (and for good reason )

http://imgur.com/G5XioME
http://imgur.com/8ImoKCa
http://imgur.com/CUOngOT
http://imgur.com/2FSaTaA
http://imgur.com/IOYEoZ6
http://imgur.com/DfYnBmr

 

[magimerlin]

Sooooo. How do you add a bit of side space to your box.... with a shower caddy ofcourse.... 12 bucks from walmart and a couple cuts and a couple bends and bam....a shower caddy turned manly chemical storage for the side of my box.... this is on the side of my HF 44" top box..
This is what I used

And made it to this.

sent from what use to be a great country...

 

[dodge610]

Now that is one heck of an idea I might just be stealing that from you.

 

[smittyjones]

Bit of an old picture, but same basic setup.

 

[magimerlin]

Now that is one heck of an idea I might just be stealing that from you.

Hell of a lot cheaper then the 40 dollar 1 row chemical holders out there and work just as well...lol.... I get 2 rows for 12 bucks...lol..... and go ahead and steal away......

sent from what use to be a great country...

 

[Exceller8]

Hell of a lot cheaper then the 40 dollar 1 row chemical holders out there and work just as well...lol.... I get 2 rows for 12 bucks...lol..... and go ahead and steal away......

sent from what use to be a great country...

Great idea!!

 

[mjoekingz28]

sent from what use to be a great country...

What do yo mean by this?

 

[2ndGearRubber]

What do yo mean by this?

The message was sent via an app like "tap-a-talk". In basic form, the messages end with "sent via tap-a-talk", but the signature can be altered.

The OP wishes ronnie reagan was still in office.

 

[Tucker99]

Just vote for Trump, next best thing.

 

[donniewilkins3]

I picked up this Lista toolbox for free last week. It has been in the guys basement and been in a few floods. Now I just have to figure out how to get rid of all the rust on this monster.


Sent from my iPhone using Tapatalk

 

[gmwelder86]

Either use a rust converter or spray down with white vinegar everyday for about a week than rinse with water. Vinegar eats away at the rust and leaves you with clean metal.

 

[donniewilkins3]

Thank you for the tip.


Sent from my iPhone using Tapatalk

 

[zkling]

I picked up this Lista toolbox for free last week. It has been in the guys basement and been in a few floods. Now I just have to figure out how to get rid of all the rust on this monster.

Sent from my iPhone using Tapatalk

Damn

 

[Outlawmws]

Guy's, I'd suggest dropping the politics real quick, unless you don't like being GJ members...

 

[garthg]

And made it to this.

sent from what use to be a great country...

That's a great idea, but I think I would trust magnets better than those suction cups. I think you're apt to find those cans and rack on the floor one day.

Home Depot has a nice selection of magnets.

 

[magimerlin]

Look alot closer.... like right behind the brake cleaner can.. I cut and bent the wire of the rack to reach over to where the tool box handle usually gets bolted on to. Bent the wire to a hook of sorts and used a bolt and washer to attach it to the box... the suction cups just keep the bottom section of rack from pulling away from the box.. they ain't hosting any weight up..

sent from what use to be a great country...

 

[02Xterra]

Purchased this as a black friday deal from my local hometown store.. Now I can finally get all of my unused tools out of my Xterra and everything else organized

^Standard Wrench overflow from the other drawers

^Gearwrench ratcheting wrenches, craftsman for the others

^MAC 1/2" Metric impact set, Craftsman 3/8" sockets, and then HF 1/4" drive.. I'm hoping to start filling these trays up soon

My other tool box that resides in the Xterra and carries the rest of the tools..

 

[whitetrash1]

Picked this up today. I'm pretty excited. 550 wasn't too bad I don't think

 

[JAKE-THE-TOOL-MAN]

picked this up today. I'm pretty excited. 550 wasn't too bad i don't think

$550? You ****!

 

[whitetrash1]

$550? You ****!

The best part is once I sell my HF it'll be more like a $250 upgrade

 

[thegroundpounder99]

The best part is once I sell my HF it'll be more like a $250 upgrade

I think you did good lol.....very nice and yeah, you ****!!!


Sent from my iPhone using Tapatalk

 

[Outlawmws]

That's a great idea, but I think I would trust magnets better than those suction cups. I think you're apt to find those cans and rack on the floor one day.

Home Depot has a nice selection of magnets.

I don't think the suction cups are anything more than a padded cushion lower down. I believe the top rail is screwed in place...

 

[garthg]

Look alot closer.... like right behind the brake cleaner can.. I cut and bent the wire of the rack to reach over to where the tool box handle usually gets bolted on to. Bent the wire to a hook of sorts and used a bolt and washer to attach it to the box... the suction cups just keep the bottom section of rack from pulling away from the box.. they ain't hosting any weight up..

sent from what use to be a great country...

Okay. I don't want to drill holes in my top box (which is Snap On), so I might try your idea using magnets.

 

[gipraw]

Picked this up today. I'm pretty excited. 550 wasn't too bad I don't think

http://s246.photobucket.com/user/ge...7-45DB-9441-D0D78A4E4226_zps7tyskwxw.jpg[/URL

Hell of a deal for $550, even without selling your HF ..

Love the color.

 

[MWEric]

Out with the old ( new one should be here later today will post).

 

[ryanm]

paid $400. needs cleaned up

 

[dodge610]

Out with the old ( new one should be here later today will post).

What are you replacing it with or is it a surprise.

 

[MWEric]

New krl7022 and whatever the cart number is. Too f'ing cold to do anything with them. A sad winter when 10 is too cold.

 

[dodge610]

Yes sir I would upgrade for that. That is a sweet looking box and cart. Like the color combo.

 

[magimerlin]

Look alot closer.... like right behind the brake cleaner can.. I cut and bent the wire of the rack to reach over to where the tool box handle usually gets bolted on to. Bent the wire to a hook of sorts and used a bolt and washer to attach it to the box... the suction cups just keep the bottom section of rack from pulling away from the box.. they ain't hosting any weight up..

sent from what use to be a great country...

Here a pic to show what I mean..


sent from what use to be a great country...

 

[NJHandyGuy]

02 xterra interesting set up what do you do with them

 

[pdizzleinmt]

 

[bobbycos]

my Mac



my Matco

 

[Ditchdigger]

My humble hf 56 with the side box from my old 44


An old Wilton 4" mounted to the top. Strip magnet on the other end to hold pry bars and breakers.