K-Dog
Well-known member
As long as it's not full of kids I guess it's okay...
Let's see your toolbox.
- Thread starter wythors
- Start date
As long as it's not full of kids I guess it's okay...
FOCUS.FREAK
Well-known member
I'll tell you it really weird seeing something this high in the air. Cars is one thing.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Today I swapped big bottom drawer out for 2 smaller ones. I call it the KRSC37. I wanted to isolate the stuff floating around my impacts so that worked out well. Doing everything I can to make the 43 cart last a little longer. I will post drawer update pictures next week; I can't fit much more.
Sent from my iPhone using Tapatalk
The rest of drawers. Some stuff is stacked so there's more hiding
Last edited:
matemike
Well-known member
Have you put that in the green snap-on tool **** thread?
http://www.garagejournal.com/forum/showthread.php?t=97311
http://www.garagejournal.com/forum/showthread.php?t=97311
Jeepster425
Well-known member
If only my shop had those...
Sent from my iPhone using Tapatalk
Sent from my SCH-I545 using Tapatalk
scooterGA
Well-known member
Well the wife says I went from a condo to a house but I have expanded my box again. Added a KRL additional bottom chest to what I had. Was too good a deal to pass up. Gives me another bottom chest and a workspace as well. Shop is running out of room for tool box needs. Will post more photos later after it gets organized. For now just moved into place.
Attachments
Is that a 7022 carbon by chance on the left? I just recently got one in the carbon with red drawer trim and it looks pretty cool in person.
FOCUS.FREAK
Well-known member
scooterGA
Well-known member
It is the carbon with cranberry trim. Wasn't an exact match to mine but for the price I got was close enough. It has the carbon fiber on top of the drawer pulls as well
And to think i had talked myself out big tool box. There is so much space!
Sent from my SM-N910P using Tapatalk
Inabox85
Well-known member
This link is my updated garage tour video. Enjoy.
lightning02
Well-known member
- Joined
- Jul 29, 2013
- Messages
- 2,677
How is that 6ft bench? Did it come assembled? Does it seem like it will hold up well over the years?
K-Dog
Well-known member
The rest of drawers. Some stuff is stacked so there's more hiding
Is there a reason some of the sockets are flipped one way, and the ones next to it are flipped another way ?
( yeah cause that would never happen in my box
)rice rocket
Well-known member
- Joined
- Mar 24, 2011
- Messages
- 3,175
That's a easy way to spot sockets.
Looks like he's a JIS man, 8/10/12/14/17 are flipped.
Looks like he's a JIS man, 8/10/12/14/17 are flipped.
Jarhead0408
Well-known member
Is there a reason some of the sockets are flipped one way, and the ones next to it are flipped another way ?
( yeah cause that would never happen in my box
Wow. Good eyes fellas. Might do a few common sizes like this as well.
lbhsbz
Well-known member
Top drawer of my KRL1001 I bought 16 years ago.
Not pretty, but they get used.
edit..10 points to whoever can guess what brand dealer I worked at...there is a clue in this shot
Not pretty, but they get used.
edit..10 points to whoever can guess what brand dealer I worked at...there is a clue in this shot
Last edited:
M4A1Carbine
Well-known member
How do you like your Craftsman torque wrenches? Do they hold up well?The main drawers.
Is there a reason some of the sockets are flipped one way, and the ones next to it are flipped another way ?
( yeah cause that would never happen in my box
Exactly [emoji1360]
Top drawer of my KRL1001 I bought 16 years ago.
Not pretty, but they get used.
edit..10 points to whoever can guess what brand dealer I worked at...there is a clue in this shot
I don't know why but I think that's pretty neat u bought that brand new 16 years ago. Would like to see more drawer pictures of that if u don't mind.
Sent from my iPhone using Tapatalk
FOCUS.FREAK
Well-known member
Well I have two because the or closest to me the locking tab to lock it in place decided to stop working. So I just purchased my friends for 15 bucks. That's the only negative I have about it
JJThrasher
Well-known member
Top drawer of my KRL1001 I bought 16 years ago.
Not pretty, but they get used.
edit..10 points to whoever can guess what brand dealer I worked at...there is a clue in this shot
audi/vw probably
FOCUS.FREAK
Well-known member
Top drawer of my KRL1001 I bought 16 years ago.
Not pretty, but they get used.
edit..10 points to whoever can guess what brand dealer I worked at...there is a clue in this shot
International/harvester or freight liner. Some type of heavy diesel shop?
Here's my new(to me) Vidmar it's 45" wide, 28" deep and 59" tall. I was going to try and strip the rattle can paint job off with acetone and Mr. Clean Magic Erasers, but after having gone through 2 of the "magic erasers" you can see what I have gotten stripped off. I got tired of waiting to put my tools in so I decided, wtf it's a toolbox who cares in all honesty what it looks like as long as it gets the job done.
Anyway, here are some pics I still have some stuff in my old Mac 33" wide top and bottom I need to get out and I also have a 26" roller I have some tools in too, but I still have four full drawers empty on the Vidmar.
The last two pics you can see a SK set that used to belong to my grandfather who passed a couple months ago. It's missing a 1" socket at least in the 1/2" drive, I have the breaker in my trunk for doing lugs. The 1/4" drive set I'm not too sure what's all missing.
Edit: Forgot the wrench drawer
Anyway, here are some pics I still have some stuff in my old Mac 33" wide top and bottom I need to get out and I also have a 26" roller I have some tools in too, but I still have four full drawers empty on the Vidmar.
The last two pics you can see a SK set that used to belong to my grandfather who passed a couple months ago. It's missing a 1" socket at least in the 1/2" drive, I have the breaker in my trunk for doing lugs. The 1/4" drive set I'm not too sure what's all missing.
Edit: Forgot the wrench drawer
Attachments
Last edited:
imalexodell
Well-known member
The tectonics sticker gives it away. BMW is my guess.
The plastic handle on mine split. It was rarely used, never loaned, never dropped. Replaced it with a Techangle.
wombat31x
Well-known member
Just updated my main toolbox,Well not so much the toolboxes but the carrier,My old "Unbreakable" Hi-Lux broke so I upgraded to this Land Cruiser with heavy duty suspension and added a vice (Dawn 5 inch)
speed bump
Well-known member
crewchief888
Well-known member
Outlawmws
Well-known member
Nice rig and setup Wombat.
Speedbump; well worth $55!
Speedbump; well worth $55!
UTE for the win. The EPA would never let Toyota bring that truck over here.
Cool, man. I wish we could get some of the more utilitarian (and diesel) Land Crushers over here....
fireeqpsrv
ALLIANCE MEMBER
Awesome setup wombat
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
sonic.apex
Active member
wombat31x, that's a ****** cool set up!
