Let's see your toolbox.

[Dimoncenzo]

This box will be 60 inches wider in a month or two. Got promoted from n lead tech to shop fleetmanager. Now all my tools i had at work come home to over load my box

Congrats on your promotion. But if all your tools are going home, why does the box get bigger?

Or is this "home"?

 

[walwalka]

Been a long while since I posted, but now I have my own garage and I'm working on getting it setup to do some work.. I picked up the HF 5 drawer cart to replace my old box that I let my father have since I moved first into a place with no place to store anything. Now I'm in a duplex with a single car and working to to get it setup nicely. Work bench is next on the list of things to build.









Overall, great purchase. Got it for $160 this past weekend. I will have to go back through and loosen some bolts to get it to sit flat but the chunk of wood works for now..

 

[winlinmac]

Does anyone here use a Cantilever Tool Box primarily as a storage method and not as a portable transport method?

 

[HzEmall]

I did the same on my tool box same color not surr if you guys would be interested but inhave one of the small 4" deep drawers for a master box in green with chrome trim i need to nove6

How much?

 

[Roobaix]

Does anyone here use a Cantilever Tool Box primarily as a storage method and not as a portable transport method?

Kinda sorta. I have the Hazet 190L that primarily sits in my garage. It's loaded down with full 1/4" and 3/8" socket sets, extensions, 8 or so ratchets, combination wrenches, two sets of screwdrivers, a set of pliers, and a few misc. items.

It is my portable box at the same time, but only when I need to take those types of tools with me.

 

[mattwhite079]

Congrats on your promotion. But if all your tools are going home, why does the box get bigger?

Or is this "home"?

Going on previous pics, this is his home setup.


Sent from my iPad using Tapatalk

 

[alpinewhite]

These are rare. I don't think I have any of these.

 

[04chase]

How much?

Shoot me an offer i have it nicely packed ready to go was asking 150 obo. Depending on location ill work with you.

 

[HzEmall]

Shoot me an offer i have it nicely packed ready to go was asking 150 obo. Depending on location ill work with you.

What's the part number on it? Any pictures of it?

 

[KLO101489]

I've been following this on IG. Love it! Nice work man. I'm close by you in the Bay Area. I had considered reaching out for refinishing my box a few times.

Hello everyone,

I recently just completed this Snap On KR562A 'Taco Wagon'. Taken down to bare metal, mostly media blasted. Matched the paint as closely to Snap On's extreme green, the closest I could match up was 'Kawasaki Green'. After doing a partial paint cure I finished it off with a MIT powder coatings 'glass clear. All locks match and work. Last to be installed/fitted: snap on drawer trim that I am matching to the matte black accents, and a .5 thick black UHMW work surface. I started this project with all intentions of keeping it but my snap on driver is too convincing and I need to make room for my new KRL1033.... I'll be refinishing a KR398A this week in S/O red.

 

[mfrantz90]

These are rare. I don't think I have any of these.

Very rare haha I didn't have any until I bought this box


Sent from my iPhone using Tapatalk

 

[chrisnazzy]

Shoot me an offer i have it nicely packed ready to go was asking 150 obo. Depending on location ill work with you.

Hey sorry to jump in but are the extra drawers you have for sale from the Extreme Green Epiq you have in all of your pics. I believe GJ Members HzEmall and OCD have KRL series boxes. Apologize if I missed something in the thread. Just trying to help.......

 

[CS454]

Hosted to Imgur to avoid spamming high res.
https://imgur.com/a/WO7jr

Power Probe sleeps in my locker. Hoping to add/upgrade to a KRSC46 next year as a main cart. Not pictured is my other set of tools at home, LOL. This lot gets me through day to day.

 

[04chase]

Hey sorry to jump in but are the extra drawers you have for sale from the Extreme Green Epiq you have in all of your pics. I believe GJ Members HzEmall and OCD have KRL series boxes. Apologize if I missed something in the thread. Just trying to help.......

No they are from a masters series , i traded it in on my epiq

 

[04chase]

What's the part number on it? Any pictures of it?

Pm sent

 

[pdizzleinmt]

My road box in my service truck at work.

 

[drewvdw]

Pdizzle, do you work for Case? Ag or construction? I noticed the wrenches. I've got the same set too.

 

[pdizzleinmt]

Case construction.

Sent from my SM-G930V using Tapatalk

 

[drewvdw]

Same here. Do you guys have the same parts issues we're always having? It seems like we can't get anything we need in a reasonable time. It took a week and a half for us to get a rear window in for a 440ct.

 

[pdizzleinmt]

Ya it can be frustrating for us ordering parts. Some things come quick others seem to take forever. I work on the crane side mostly so I haven't had to deal with case parts recently. Crane parts are ridiculous sometimes as far as back orders and what the whare houses have in stock.

Sent from my SM-G930V using Tapatalk

 

[drewvdw]

We don't deal with cranes here, but just about everything else. I get really frustrated between not having parts and the shop not having tools it should have. Well, I guess we have most of the tools we need, but its impossible to find them because our tool room is a disaster.

 

[Boepeep]

If it make you guys feel any better cnh on the ag side is just as bad, I have a sprayer in my Bay at work and all the parts I need are on back order

Sent from my SM-G930V using Tapatalk

 

[pdizzleinmt]

We are still waiting on parts for a crane we sold in August that have been on backorder.

Sent from my SM-G930V using Tapatalk

 

[MarkG]

Technically, it's a 'toolbox', but in the sign business, we call it a 'sign kit' or 'kit box'. I like it----lift out tray, big enough to act as a seat or stool and is made for that, in fact! Supposedly waterproof. I'm sure it's at least very water-resistant, as it has a heavy rubber gasket in the lid.

 

[Boepeep]

We are still waiting on parts for a crane we sold in August that have been on backorder.

Sent from my SM-G930V using Tapatalk

I won't be surprised if this sits that long too, it's roughly 60k in parts alone and its all major components that have to come through miller because it's a new holland front boom

Sent from my SM-G930V using Tapatalk

 

[nickc12]

My recently purchased Matco 4s! Bought it used for a STEAL! Check out the video if you guys are interested!

Sent from my iPhone using Tapatalk

 

[DSLTRK]

Technically, it's a 'toolbox', but in the sign business, we call it a 'sign kit' or 'kit box'. I like it----lift out tray, big enough to act as a seat or stool and is made for that, in fact! Supposedly waterproof. I'm sure it's at least very water-resistant, as it has a heavy rubber gasket in the lid.

You perform a lost art. That is definitely one of a kind! Thanks for sharing.

My recently purchased Matco 4s! Bought it used for a STEAL! Check out the video if you guys are interested!

Sent from my iPhone using Tapatalk

I like it. You can't beat blue (or black, lol).

 

[DSLTRK]

My road box in my service truck at work.

I had that same exact box, I called it the 'bunker'. Very tough box, and they hold their resale value, IMO, the best out of the truck boxes.

 

[nickc12]

You perform a lost art. That is definitely one of a kind! Thanks for sharing.







I like it. You can't beat blue (or black, lol).

Blue is my favorite color! It was a sign I had to buy it. Haha


Sent from my iPhone using Tapatalk

 

[db130]

I've outgrown my NAPA 7-drawer tool cart after a good friend of mine left the automotive industry and left me a whole bunch of tools. I pulled the trigger on this Cornwell 40" top and bottom set:

It's probably overkill for homeowner use, but it's somewhat rare to find a matching Cornwell top and bottom set in my area.

It weighs 635 lbs! 42W x 71H x 24D.

 

[bobcatdan]

Same here. Do you guys have the same parts issues we're always having? It seems like we can't get anything we need in a reasonable time. It took a week and a half for us to get a rear window in for a 440ct.

While I don't work on Cases to off ten, Linde forklifts can have a great waiting period for parts. Not too unheard of to wait 3 months for a mast cylinder. Also have you tried ordering a VW diesel replacement engine lately. JCB is pretty good too, 4 months for a thermostat.

 

[Greg85mcss]

I've outgrown my NAPA 7-drawer tool cart after a good friend of mine left the automotive industry and left me a whole bunch of tools. I pulled the trigger on this Cornwell 40" top and bottom set:

It's probably overkill for homeowner use, but it's somewhat rare to find a matching Cornwell top and bottom set in my area.



It weighs 635 lbs! 42W x 71H x 24D.

Very nice. There was a 42" bottom like that on craigslist for $300 but I wanted wider so I skipped past it for a month. Finally looked at it & saw it was 24" deep. The guy had sold it half an hour before I called.

 

[DSLTRK]

I've outgrown my NAPA 7-drawer tool cart after a good friend of mine left the automotive industry and left me a whole bunch of tools. I pulled the trigger on this Cornwell 40" top and bottom set:


It's probably overkill for homeowner use, but it's somewhat rare to find a matching Cornwell top and bottom set in my area.

It weighs 635 lbs! 42W x 71H x 24D.

You don't see many stackers anymore. I prefer them over the roll cabs for space savings, but again, I'm tall at 6-2, so height is not really an issue.

Nice box BTW.

 

[SQ is the SQUAD]

Figured I would post some drawer pictures for you guys since I got he new KRL1163. Some drawers could use a little organizing but it's sure nice to finally have a dedicated hammer, brake tools and electronics drawer.

Pliers drawer is the most empty as of now. Need to get me some long pliers and some others as well.

who makes this insert? part number?

 

[JacksoNRolyaT]

who makes this insert? part number?

First thing I looked up when I saw that picture!



31 1098J5000 Kit, Tool Storage Accessory, Cordless - 206.00 USD



37 1098APA03 Holster, Large x 4 - 3.05 USD

38 1098APA02 Holster, Small x 4 - 2.60 USD



Listed under "Repair Parts" here:

https://store.snapon.com/KRL1163-Se...iple-Bank-16-Drawers-Gloss-Black-P854914.aspx

There is the part numbers for the insert.

 

[one9gt]

There is the part numbers for the insert.

Would you mind taking measurements of that organizer?? They don't list them on snap-ons site


Sent from my iPhone using Tapatalk

 

[Heyabusa]

Traded in my matco cart for a used snap on in royal blue, I call it mini me


....gone

And now



Sent from my iPhone using Tapatalk

 

[lucky3]

My recently purchased Matco 4s! Bought it used for a STEAL! Check out the video if you guys are interested!

Sent from my iPhone using Tapatalk

Man I just sold mine Friday for $1400 . The same color with the stainless top.

 

[lucky3]

Sold my matco 4s and bought this kra2422. Paid $1300 for it.

 

[daddy2coull]

who makes this insert? part number?

to buy the power tool organiser over here in blighty is just shy of $400 so i've ordered the holsters i need for around $60 and i'll build the rest myself from stainless offcuts from work