Let's see your toolbox.

[JDN]

Got a few additions and reorganized a few drawers

 

[JDN]

More

 

[JDN]

Last couple

 

[T_Roze]

More

JDN, two questions for you.

How do you like your ir 1/2" stubby? Just found out about those recently. If it's got the jamb, I could see that little guy being really nice for brake and suspension work!

Along that same line, how do you like your ir air hammer? Any comparison to the snap on 3050? (I believe that's the number for the big so one).

And nice collection by the way!


Sent from my iPhone using Tapatalk

 

[ckblum]

Tons of awesome stuff in there ckblum. I'm super jealous of that yellow torque wrench. Haven't seen one before. Any chance you have the part #?


Sent from my SPH-L720T using Tapatalk

I remembered and just snapped a pic on coffee break. Here's the PN!

 

[Ridwaan Gallow]

You ****!

Big time!

 

[Ridwaan Gallow]

Christmas came early this year my Snap-on guy just gave me a jacket

I mean you..

Mr. Leather jacket..

You ****..

 

[deminimis]

Here's one:

Here's another:

And some more (although only the lower boxes hold tools, the uppers are for kiteboarding or snowboarding/ski gear):

(when redoing my mats)

I need another chest and upper combo in the shop (can't close the doors half the time).

 

[Cope]

Sweeeet setup there DYNO DALE

I don't know, looks like he needs a few more tools.

 

[upgrading]

Got a few additions and reorganized a few drawers

Nice collection of Mac Grips there.

 

[rugerman1970]

Here's mine.

Sent from my SM-G920V using Tapatalk

 

[chrisnazzy]

I remembered and just snapped a pic on coffee break. Here's the PN!

Thank you. I might just have to invest in one of those!

Sent from my SPH-L720T using Tapatalk

 

[w.hansen]

Mobile toolbox
Kept going out and not getting all my tools.
Got almost all basic tools
Still got more work with wrench drawer, bottom drawer, got caddy trunk emblem for 2 dollars, sticker coming to cover the sun damage
I will update with mods to screwdriver holder and wrench drawer
But its almost full and its heavy to move with one guy

 

[wagzilla]

I mean you..

Mr. Leather jacket..

You ****..

Coolest thing I have got in a while

James

 

[JDN]

JDN, two questions for you.

How do you like your ir 1/2" stubby? Just found out about those recently. If it's got the jamb, I could see that little guy being really nice for brake and suspension work!

Along that same line, how do you like your ir air hammer? Any comparison to the snap on 3050? (I believe that's the number for the big so one).

And nice collection by the way!


Sent from my iPhone using Tapatalk

I like the stubby for certain situations, its not nearly as powerful and the 2135, as far as the hammer I like it and use the hell out of it with good results but I have no experience with the snappy.

 

[SuzukiGS750EZ]

 

[gipraw]

Nice setup SuzukiGS750EZ. I really need to pick up another charger for my M18 stuff so I can keep one in my cart.

 

[SuzukiGS750EZ]

Nice setup SuzukiGS750EZ. I really need to pick up another charger for my M18 stuff so I can keep one in my cart.

I think I have two. One stays in the box under my toolbox with my m18 fuel Sawzall to travel with and the other on the side of my toolbox. I used to have them in the bottom drawer but I made a side plate to make room in the drawer. And thank you

 

[Greg85mcss]

Love the krsc with the sliding top. If I had it to do over I'd have one of those & a cheaper stationary box instead of the other way around.


Sent from my iPhone using Tapatalk

 

[Tech89]

Haven't posted in a while.


-Pat

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[alpinewhite]

Haven't posted in a while.

-Pat

Sent from my SAMSUNG-SM-G890A using Tapatalk

Rotated for you.

 

[Tech89]

Rotated for you.

Thanks. Don't know why it did that.

-Pat

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[MattVette89]

Haven't posted in this thread in a while....checking back there are some more awesome setups on here.

Nothing major. Grabbed a couple more 1/4" Hansen trays the other day and reorganized the socket drawer. I'm considering some of the lock-a-socket style trays for the 3/8 swivels/etc.

 

[Alamedasam]

I been looking for the last several years for a Snap On KR-562. My buddy who is a Snap On dealer finnaly found me one in pretty good shape. I had one back in the late 70's or early 80's cant figure out why I wanted another one except they are really bitchen!

The drawer sliders & castors are shot, & its missing the masonite top, & one drawer is bent. He ordered me all the stuff, & found the castors & sliders are under lifetime warrenty! I bought the top & new drawer.

The bad part is its covered with old ugly stickers. Anybody know how to get them off without damaging the paint? Im afraid that the eraser on the crud-thug
or heat gun might cause paint damage. Please let me know if you have any ideas.a Im having issues with the photos, hope they came out ok.

 

[Outlawmws]

For the stickers, the heat gun or get it out in the sun on a hot day. then work them off slow. Any residual glue use lighter fluid/white gas/Coleman fuel/Naptha

 

[michelin]

Haven't posted in this thread in a while....checking back there are some more awesome setups on here.

Nothing major. Grabbed a couple more 1/4" Hansen trays the other day and reorganized the socket drawer. I'm considering some of the lock-a-socket style trays for the 3/8 swivels/etc.

What trays are these with extensions please?

 

[VinceG]

My tool box and Grandson. Tool box is Snap On KRL Master Series in Storm Grey with coustom decals.

 

[Boneebone]

I been looking for the last several years for a Snap On KR-562. My buddy who is a Snap On dealer finnaly found me one in pretty good shape. I had one back in the late 70's or early 80's cant figure out why I wanted another one except they are really bitchen!

The drawer sliders & castors are shot, & its missing the masonite top, & one drawer is bent. He ordered me all the stuff, & found the castors & sliders are under lifetime warrenty! I bought the top & new drawer.

The bad part is its covered with old ugly stickers. Anybody know how to get them off without damaging the paint? Im afraid that the eraser on the crud-thug
or heat gun might cause paint damage. Please let me know if you have any ideas.a Im having issues with the photos, hope they came out ok.

Use a hair dryer to heat up glue on the sticker and then use WD-40 to remove the residual glue left on the paint.

Then use a good cleaner wax to remove oxidation and scratches on the paint and follow up with a good wax.

 

[hoston23]

The bad part is its covered with old ugly stickers. Anybody know how to get them off without damaging the paint? Im afraid that the eraser on the crud-thug
or heat gun might cause paint damage. Please let me know if you have any ideas.a Im having issues with the photos, hope they came out ok.

if you use wd40 and spray the stickers then use a plastic tool to scrap them off it works well. we do it all the time for tractor decals

 

[bodyguy16]

Slow morning reorganized my top drawer


Sent from my SM-G903W using Tapatalk

 

[chrisnazzy]

Heat gun and alot of patience. Once those old stickers are warmed up they should peel right off though.

Sent from my SPH-L720T using Tapatalk

 

[Rick B.]

Where does one find this type of shelving material. I checked Lowes & Home dep and all they seem to have is stuff with closer slots and more cross supports.

 

[Tonellin]

Where does one find this type of shelving material. I checked Lowes & Home dep and all they seem to have is stuff with closer slots and more cross supports.

I think you might be overlooking it at least at your local HD. Mine has a whole aisle dedicated to shelving and has many options in sizes for these style of racks

 

[R. Johnson]

Yes, mine came from Lowes. I think this is the one I used:

https://www.lowes.com/pd/Rubbermaid-Linen-6-ft-L-x-12-in-D-White-Wire-Shelf/3098543

The sections are cut from the back half of the shelf. I bent to shape using some 2x4s screwed together clamping the shelf, then clamping the whole thing in a vise.

 

[Bellaireroad]

Got my few files organized


Sent from my iPhone using Tapatalk

 

[wagzilla]

I think I have a few drawer's done the way I like for now

that's all for now

 

[avmaine]

Proof that you can in fact be organized and use your tools all at the same time. Love it.

 

[Lotek]

Just picked this combo up for $650, told the boss that I'm downsizing...

Actually, I'm tired of looking for tools in the garage, and just couldn't bring myself to spring for a Harbor Freight box.

 

[gmwilkes]

I think I have a few drawer's done the way I like for now

that's all for now

Nicely organized. What are the rails they're mounted on? Also, what do your wrench sets range from? Wanting to build or buy a set that covers a broad spectrum of sizes, maybe 6mm-22mm and 1/4"-1"? I've been trying to build up my tool collection to justify buying a box and putting it in my moms garage (where I do all my mechanic work) to hold my tool stock as it grows.

 

[04chase]

Adding on another 1k lbs .