Let's see your toolbox.
- Thread starter wythors
- Start date
619DioFan
Well-known member
Was wondering about the wrenches twords the back with the diffferent colored handles.
Attachments
GTA Matt
Well-known member
Cal van 450 tight access wrenches. They have a 3/8 square drive on one end. Very rarely get used however.
DynoDale
Well-known member
Top Drawer Tuesdays. This is my home toolbox, I don't turn wrenches for a living, just tinker around in the garage.
I didn't get the memo about top drawers being the socket drawer, because I put screwdrivers and nut drivers in my top drawer.
I didn't get the memo about top drawers being the socket drawer, because I put screwdrivers and nut drivers in my top drawer.
Outlawmws
Well-known member
Vbwiley92
Well-known member
I'll play. I only do stuff around the house nd on my vehicles. This may motivate to post all of them. 
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
I love the look of shiny new tools, I just wish they'd stay that way haha
Sent from my SM-G930V using Tapatalk
chipper
Well-known member
Top Drawer Tuesday it is! Good idea!
Identifix on the computer. Best tool in the whole box
Attachments
Jake C
Well-known member
Haha, couldn't be more right. Love that site. Best tool is your brain, and Going through some of the posts on Identifix is like going through another Techs brain. Lots of info.
T_Roze
Well-known member
Sent from my iPhone using Tapatalk
Taken 2 months ago. Box is now over filled and going to get triple bank
Sent from my iPhone using Tapatalk
Attachments
KM223
Well-known member
Taken 2 months ago. Box is now over filled and going to get triple bank
Sent from my iPhone using Tapatalk
I'm sure that sticker really says "come jack with my tools because I'm asking for it"
Attachments
I'm sure that sticker really says "come jack with my tools because I'm asking for it"
Lol pretty much
Sent from my iPhone using Tapatalk
KM223
Well-known member
^^^love the color combo of the box btw!
Jarhead0408
Well-known member
Top Drawer Tuesday it is! Good idea!
Hey Jake, who's the maker of the deep universal impacts in the red tray?
Thanks!
Attachments
Thank you much. Pretty rare to see that shade of green. That's why I got it
Sent from my iPhone using Tapatalk
Jake C
Well-known member
Got these ones at Napa, don't remember what I paid but it was reasonable, I've beat the **** out of a few of them and none broken yet. Very happy with them. More useful then I thought they would be for sure.
Attachments
chrisnazzy
Well-known member
Made by Sunex for NAPA. I have a "NPT" 1/2" Torx inpact set that shares a case and partial part number with its Sunex twin. I'm almost positive all the NPT impact sets are Sunex so obviously outstanding quality and value!Got these ones at Napa, don't remember what I paid but it was reasonable, I've beat the **** out of a few of them and none broken yet. Very happy with them. More useful then I thought they would be for sure.
Sent from my SM-G930P using Tapatalk
Attachments
Jake C
Well-known member
Makes sense. I really like all of mine. They probably make the Carlyle sockets then too....
Mastermind
Well-known member
I'll play along
Sent from my SM-G930V using Tapatalk
So, how great is the bad mother dewalt 1/2 inch impact? Is it worth it? Looks like yours gets used. I use my 3/8 a ton, but sometimes it just doesn't have the power.
Attachments
Tomthumb717
Well-known member
Jake - Impressive
c-hawk19
Well-known member
Jake C
Well-known member
It out does all the snap on and matco ones of my coworkers, even Their air guns (we have really crappiy air at work tho). I've had mine for a year and half or so and it's still going strong. I've dropped it off of the top of sprayers and a combine once and it never quits. Definitely one of my best investments in my box.
Sent from my SM-G930V using Tapatalk
T_Roze
Well-known member
Got these ones at Napa, don't remember what I paid but it was reasonable, I've beat the **** out of a few of them and none broken yet. Very happy with them. More useful then I thought they would be for sure.
I've got the same sockets, in ultra pro (Napa Canada). Great sockets. I found the joint flares a little bit the first hard use, but once that is filed down they work well and do not bind.
Good to see the tool vault top drawer can handle some serious weight! Awesome socket selection by the way
Sent from my iPhone using Tapatalk
Attachments
Jake C
Well-known member
I've got the same sockets, in ultra pro (Napa Canada). Great sockets. I found the joint flares a little bit the first hard use, but once that is filed down they work well and do not bind.
Good to see the tool vault top drawer can handle some serious weight! Awesome socket selection by the way
Sent from my iPhone using Tapatalk
Thanks! Yeah there has to be a few hundred lbs in that drawer. Handles it great.
Carquest
Well-known member
C-Hawk-Love the color of the Snap On cart! Very, very nice.....
c-hawk19
Well-known member
I dig the color. got lucky and found that krl on offerup for a song
Jarhead0408
Well-known member
Got these ones at Napa, don't remember what I paid but it was reasonable, I've beat the **** out of a few of them and none broken yet. Very happy with them. More useful then I thought they would be for sure.
Good to go. Thank you gents!
Attachments
Bobcat753
Well-known member
Bobcat753
Well-known member
Bobcat753
Well-known member
Yea those are my nice ones. I have 4 others scattered in the shop. I had just sold 5 other ones that I didn't need, two of which were still brand new
