Let's see your toolbox.

[Trey T]

I saw it, I liked it, I bought it.. There's a coupon out there already to bring it to $230..(I blurred out a company logo, it does not have a series 2 badge)

Sent from my Nexus 6P using Tapatalk

Get couple more and turn them into a setup like this Lista below by rearrange the drawers.

 

[225]

I saw it, I liked it, I bought it.. There's a coupon out there already to bring it to $230..(I blurred out a company logo, it does not have a series 2 badge)

Sent from my Nexus 6P using Tapatalk

Damn you internet. I want this now.

 

[C.L S2000]

Yes that is the 44" I have used them on a couple bench builds. Good bang for the buck but wish they were deeper.

here is the build threads.

https://www.garagejournal.com/forum/showthread.php?t=349418


Those are very impressive Haas I currently have 2 44" in my garage which I am looking for ideas to have a framing like this to attach both of them together with a nice SS top like your build. Do you by any chance have any builds like that ? and if you dont mind me asking, how much does the SS material cost to wrap the door for the bench top of those ??

 

[72highboy]

Get couple more and turn them into a setup like this Lista below by rearrange the drawers.

I haven't taken the drawers out yet but it looks like they don't have the slots every inch like the old one, and the bottom drawer only has one slide where I believe the old had two..I will take a look today

Sent from my Nexus 6P using Tapatalk

 

[Robert Haas]

Yes that is the 44" I have used them on a couple bench builds. Good bang for the buck but wish they were deeper.

here is the build threads.

https://www.garagejournal.com/forum/showthread.php?t=349418


Those are very impressive Haas I currently have 2 44" in my garage which I am looking for ideas to have a framing like this to attach both of them together with a nice SS top like your build. Do you by any chance have any builds like that ? and if you dont mind me asking, how much does the SS material cost to wrap the door for the bench top of those ??

depends on how much work you can not do and need done by the sheet metal shop.

If you do not have a break or the ability to weld it could get spendy.

16 guage is about as thin as you would want to go for a top, (I prefer 14)

16 3 x 6 top with a 1 3/4" break and a hemmed edge will set you back about 150 bucks and about 175 for 14 guage.

 

[72highboy]

Here's the inside of the new harbor freight 26" series 2..

 

[Trey T]

Well, that's a bummer. Only top half of the railings are stamped to be adjustable.

Thanks for the photos

 

[scsracing]

Well after years of moving all over the place, I've finally got a garage back, and now a home for my tools.

Krl1022 is my main box, managed to get in quite cheap (£615) from a work auction, its the electronic opening version, ie with the keypad, but the keypad got smashed off hence the cheap price.

Other box for less used tools is the 1400mm high lista box I have, the plan is eventually to kit the whole garage out in Lista, but kitchens and bathrooms come first

 

[scsracing]

Well after years of moving all over the place, I've finally got a garage back, and now a home for my tools.

Krl1022 is my main box, managed to get in quite cheap (£615) from a work auction, its the electronic opening version, ie with the keypad, but the keypad got smashed off hence the cheap price.

Other box for less used tools is the 1400mm high lista box I have, the plan is eventually to kit the whole garage out in Lista, but kitchens and bathrooms come first

Photos carried on....

 

[scsracing]

Photos carried on....

And again

 

[upgrading]

Good stuff.

 

[MikeF2316]

And again

scs: Nice stuff. You make it sound like before you can have more Listas for the garage, you have to put Listas in the kitchen and bathroom!

 

[chrisnazzy]

Very nice scsracing!

Sent from my SM-G930P using Tapatalk

 

[yjWrangler]

New next to the old. Kind of impressed at how much stuff was crammed into the old setup

 

[JBradley500]

Lots of nice tools $C$Racing!

 

[RCLV007]

New here... thanks for the ad !! Here’s my contribution to the page. Lots of cool stuff here.

 

[tanukiboy]

Mine's a pretty blue color.

View media item 81774
View media item 81776

 

[Ericmacc]

Mine's a pretty blue color.

View media item 81774
View media item 81776

What kind of box is that?

 

[tanukiboy]

What kind of box is that?

It's a Trusco GT-470 steel toolbox from Japan.

Amazon Japan link: https://www.amazon.co.jp/gp/product/B002A5Q8YK/

 

[Ericmacc]

Thanks

 

[Kasal]

It's a Trusco GT-470 steel toolbox from Japan.

Amazon Japan link: https://www.amazon.co.jp/gp/product/B002A5Q8YK/

In the link comes a picture of the box with wheels, those wheels are included or are an extra.
It seems strange to me that a hand box assembles wheels.

 

[upgrading]

Nice box and nice Vessel and Wera screwdrivers inside it.

 

[tanukiboy]

In the link comes a picture of the box with wheels, those wheels are included or are an extra.
It seems strange to me that a hand box assembles wheels.

The wheels are included with the box. The box is pretty heavy when it's full.

 

[tanukiboy]

Nice box and nice Vessel and Wera screwdrivers inside it.

Thanks, upgrading (sharp eyes BTW)!

 

[fos373]

tanukiboy - very nice. i can never keep my portable travel box that organized......

 

[tanukiboy]

tanukiboy - very nice. i can never keep my portable travel box that organized......

Thanks, fos373. Actually, this isn't my portable travel tool box, it's my only tool box.

 

[jeepinerdeep]

Finished up scabbing together 2 junkyard Listas, mainly for supplies. Added it to my collection tonight. I lined them all up for so I could admire them, like you did as a boy with toy trucks, or army men. Haha. I seriously doubt they'll stay lined up, I'm just getting ready to do some cleaning.

 

[zendriver]

Just picked us up recently I was going to resell but decided I liked it too much.




Sent from my iPhone using Tapatalk

 

[Duker]

Finished up scabbing together 2 junkyard Listas, mainly for supplies. Added it to my collection tonight. I lined them all up for so I could admire them, like you did as a boy with toy trucks, or army men. Haha. I seriously doubt they'll stay lined up, I'm just getting ready to do some cleaning.

That is an impressive line up!


Sent from my iPad using Tapatalk Pro

 

[southpier]

Thanks, fos373. Actually, this isn't my portable travel tool box, it's my only tool box.

beautifully done and a very nice box to have.


as I see "more and more", I want 'less & less'.

 

[Fly YX]

My work box nothing special

 

[yjWrangler]

Love the divider system in this drawer. You Lista guys had it right all along. Organized chaos.

 

[LXCam]

That is an impressive line up!


Sent from my iPad using Tapatalk Pro

I'll second that. Congrats on the latest bud, that's stellar.

 

[jeepinerdeep]

That is an impressive line up!


Sent from my iPad using Tapatalk Pro

I'll second that. Congrats on the latest bud, that's stellar.

Thanks Gentlemen. I only really want for one more, and I've only ever seen a picture of one once, so I doubt I'll ever see a scratch and dent. It's a double door, eye height, 4 roll out shelves on wheels.

 

[LXCam]

Thanks Gentlemen. I only really want for one more, and I've only ever seen a picture of one once, so I doubt I'll ever see a scratch and dent. It's a double door, eye height, 4 roll out shelves on wheels.

Brother you'd die to have the one I got. 5' x 5' with 4 roll out shelves. I picked it up several years back for 3 bills. Every shelf is loaded with engine parts, heads, cranks, you get the picture. It's a gawd send. Sincerely wishing you luck finding one, I looked for a few years before I found a deal.

But to keep this thread on track, I never shared my $60 purchase here a couple months ago. I plan on repainting that black vidmar I got while building my lista bench and mounting this on top to hold cased tools and making a couple doors.

 

[marshak]

That's a nice Extreme 7217/7215/2404 combo

 

[twertsy]

I recently did another tour of my shop / toolboxes. Youtube link is here if interested.

 

[LXCam]

What a collection Todd, that's insanely impressive......or maybe just insane.


Btw, that last bonney box and kit. Obviously the previous owner took incredible care of it but it's so pristine I have to ask if it looks like it was ever used? I have a set of mid length sockets that are dedicated to AN fittings. To look at them inside and out they look like they're never been touched. I wonder if this guy had the same kind of one off application

One of these days I'm going to have to watch all your vids

 

[twertsy]

What a collection Todd, that's insanely impressive......or maybe just insane.


Btw, that last bonney box and kit. Obviously the previous owner took incredible care of it but it's so pristine I have to ask if it looks like it was ever used? I have a set of mid length sockets that are dedicated to AN fittings. To look at them inside and out they look like they're never been touched. I wonder if this guy had the same kind of one off application

One of these days I'm going to have to watch all your vids

If used, it was rare. The story was that it belonged to the owner of a feed mill who instructed all his employees not to touch it.

 

[bert1913]

is this long enough