fastrucken1
Well-known member
So I've tried the lighting programs and couldn't make it work with a pitched ceiling and didn't see any layouts close to mind in that thread.
The inside dimensions are 29'x47', 12 foot walls with a 4/12 pitched ceiling with the peak at 16'9" from the floor. My use for the building is just general work shop with a focus on vehicles.
My initial Plan was to just use 4' twin led bulb fixtures, (everything ive read suggests not quite high enough for highbays) in 4 rows of 9 fixtures. Does this sound appropriate? I was going to have outer rows 4' from walls and then the inner rows 7'6" in from the outer rows. In this configuration this has the outer rows at 13'4" and the inners at 15'9" from the floor..
Was looking at these with the bulbs https://www.ledlightingwholesaleinc.com/LSS2XT8USE4803-p/lss2xt8use4803.htm?CartID=1
Hopefully someone could provide a little guidance...
The inside dimensions are 29'x47', 12 foot walls with a 4/12 pitched ceiling with the peak at 16'9" from the floor. My use for the building is just general work shop with a focus on vehicles.
My initial Plan was to just use 4' twin led bulb fixtures, (everything ive read suggests not quite high enough for highbays) in 4 rows of 9 fixtures. Does this sound appropriate? I was going to have outer rows 4' from walls and then the inner rows 7'6" in from the outer rows. In this configuration this has the outer rows at 13'4" and the inners at 15'9" from the floor..
Was looking at these with the bulbs https://www.ledlightingwholesaleinc.com/LSS2XT8USE4803-p/lss2xt8use4803.htm?CartID=1
Hopefully someone could provide a little guidance...