To avoid these ads, REGISTER NOW!

lighting

klhitman

Well-known member
Joined
Sep 17, 2010
Messages
1,016
Location
pewee valley
i have some 4ft lights hanging in my garage but when i open the door it covers up one of the lights. Its fine when the door is down but how can i light that area when my door is open? try to post a pic later.
 
To avoid these ads, REGISTER NOW!
OP
K

klhitman

Well-known member
Joined
Sep 17, 2010
Messages
1,016
Location
pewee valley
SU1HLTIwMTAxMTIwLTAwMDgyLmpwZw.jpg
 

bczygan

Well-known member
Joined
Nov 4, 2009
Messages
22,002
Location
DETROIT! Arsenal of Scrappers
Portable work lights on tall stands.
Side wall mounted lights.
Lights mounted on supports that span from wall to wall just under the door.
(They make door tracks that mount close to the ceiling to allow more space for the lights under, instead of above the door.)
Lights mounted on the face of the door.
 
Last edited:
To avoid these ads, REGISTER NOW!

Falcon67

Well-known member
Joined
Jun 11, 2009
Messages
18,371
Location
Merkel, TX
I have three lights in that area - one gets covered by the door, the other two are on either side to provide light when the door is open.
 

Jack Olsen

Super Moderator
Staff member
Joined
Mar 22, 2009
Messages
6,678
Location
Los Angeles
I put in (home-made) pendulum lights on extended arms. The trick is that you reduce overhead height -- although I only park a car on one side. The benefit is you have the same light whether the door is opened or closed.

garage83101.jpg


05hanging.jpg


VIDEO of the door opening.

It's kind of goofy, but it gives me light above the bench I have at the opening of the garage.
 

bczygan

Well-known member
Joined
Nov 4, 2009
Messages
22,002
Location
DETROIT! Arsenal of Scrappers
never thought about that i bet that would work, or the angled wall lights. now if i only had some more light to try it with.

Code wouldn't let you hard wire exposed to the face of the door with an exposed flexible wire but you could locate a duplex receptacle such that a cord and plug would just reach the fixture in both the up and down positions. maybe make a home made fixture like Jack Olsen. Maybe use LED's.

Bill
 
To avoid these ads, REGISTER NOW!
Top Bottom